How to Remove a Stuck or Broken Threaded Pipe Nipple

[@thentil]

Thank you for making this video six years ago and keeping it up! Just helped me a bunch today!

[@jamesjameson4873]

DIY home owner here: This is the first video of many that I've watched that explains that the water supply pipe, if threaded on the outside of the wall, is also threaded inside the wall and thus, can be removed by simply turning it. I needed a shorter supply pipe due to a new toilet that didn't have room for the old long pipe coming out of the wall, and this video helped me understand the mechanics! Thank you @FixitPhil

[@FixItPhil]

You're welcome!

[@Abeguzman]

You saved me hundreds of dollars! Thanks Was not aware of the tool

[@rmglover3191]

@moon pie - i have a broken nipple in a shower line. This looks like it would be perfect if there is no pipe to grip and you have to get the broken shard out

[@Chazwozel1]

Thanks so much! Was dreading a tub spout fix because the nipple is rusted and I just know I'd strip the treads. I now know to get an internal pipe wrench! Thanks!

[@anthonyfrattalone9937]

very cool tool! just discovered your channel. Keep the videos coming!

[@humanity6fl9]

This helped me install a 1/2 male threaded no stop nipple onto a faucet without damaging the threads. Thank you

[@FixItPhil]

You're welcome!

[@matttompkins6424]

Great advice. This worked like a charm.

[@sharonlarson2060]

Thanks ..nice easy f ix

[@pdxwildchildroberts5586]

This tool was worthless on 30+yo exterior pipe..tried it when an outside faucet handle snapped off leaving the threaded male piece stuck inside the pipe elbow..at least interior pipes are protected from the seasonal elements..Do ya have a vid for that?

[@kathyrigby9381]

Thank you for sharing. Off to the Hardware store now

[@BhargaviMaddisetty-k8p]

I have done mismatch fixed for mopping stick can you show some tips how to remove

[@Ftwjay26]

Awesome video it tool works like a charm😊

[@ganeshnagesh4613]

Super bro thanks useful "100%" like 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@FixItPhil]

Welcome 👍

[@ganeshnagesh4613]

@@FixItPhil thanks bro all the best

[@Dushyantgiri]

Great even plumber don't know About it superb.. 👌

[@amandarya]

When you showed pic of internal wrench, dropped the phone and drove to HD

[@Andyslandys]

very helpful worked great with a careful application of a lot of force, saved me paying a plumber

[@tristantaus4556]

Thank you 🐲and nice part is that tool is compact for my toolbox

[@Tmewani]

Hi! how to remove the black rubber pipe which is supply line in bidet spray pipe, pipe stuck inside, how to bring it out of that silver main pipe? Thanks

[@khadijameredith7586]

Wonderful video! Thanks so much! ✨🌷

[@kellfreds1199]

Thank you very much this was exactly what I needed to do you are awesome!

[@MrGuitars8]

This is very good , thank you .

[@rafique-fy2iw]

Useful tip

[@jenniferlzr5651]

I have a stuck anode rod. I’ve crushed the nipple threads on the outside with the pipe wrench and I cannot get that pipe out. Will this work on that?

[@FixItPhil]

I think so, as long as you get the right size internal wrench that will fit the rod, you should be able to apply the torque needed to free it. It's effectiveness will depend on the amount of clearance you have and whether you have enough room to be able to grip the tool with a wrench to turn it. Hope you're able to fix your issue!

[@jenniferlzr5651]

FixItPhil thanks!

[@jenniferlzr5651]

Dang it. It still won’t budge. 😩

[@lionelsoto2327]

Wonderfull

[@donaldlee6760]

Great video. Is best practice to replace the galvanized pipe with another section of same-length galvanized pipe, a dielectric pipe, or solder a male fitting to copper pipe?

[@FixItPhil]

When connecting or joining piping, it's always a safe bet to use like materials. So if your existing/remaining section of piping is galvanized, then you could replace the broken section with galvanized with out a problem. Never mix copper with galvanized, as the zinc used for galvanizing will enter a chemical reaction with copper that corrodes the joint and eventually cause it to start leaking. For this, yes, you can use a dielectric pipe fitting to make the transition. You can also transition to PVS or ABS plastic from galvanized without any issues. What you choose to do will depend on your application and what properties you are looking for in the replacement pipes (e.g. cost, flexibility, durability, look -- if the pipe is exposed, etc.).

[@donaldlee6760]

@@FixItPhil - thanks FixItPhil. The entire run inside the wall is all copper, except the final 3 inch galvanized nipple sticking out the wall and threaded into a 90 degree (brass?) fitting. I think I'll replace the 3 inch threaded steel nipple with a 3 inch threaded copper or brass nipple.

[@armusicworldyt]

How much cost will come for this product? Is this will be available from our nearly electrical shops?

[@FixItPhil]

The cost is about $10 for a set of 3. I got mine at Home Depot, but most plumbing stores will carrying something similar. Electrical stores might carry something like this, but it's more commonly used for plumbing pipes than electrical.

[@armusicworldyt]

@@FixItPhil Thank you...

[@muthubarathiparamasivam9622]

How much the tool costs

[@keturunanal-idrus318]

Yessss.... very good idea

[@SatishKumar-bp1io]

Very nice 👌

[@ErikValind]

Thank you!!

[@richarde735]

AWESOME

[@GTSN38]

That's great, but what if it's stuck ? The nipple won't turn, and you're about to twist the next pipe. Will this keep the pipe from twisting, and breaking ?

[@FixItPhil]

No, unfortunately if you can't get the nipple to unthread from the pipe behind it without also twisting that pipe, then unfortunately the tool won't work in that situation. You may need to open up more of the wall to see what's going on or as a last resort, cut the pipe.

[@GTSN38]

I usually do just cut the pipe and tear it out, I just thought maybe you knew a better way

[@almudafera.a2426]

Perfect

[@lionelsoto2327]

Estupendo

[@bastiamsujan5163]

How can I take it out the tap. Because nut thread is gone. I need the change wacher.

[@FixItPhil]

You can try using two pairs of channel locks, one to hold the pipe nipple with the threads and one to twist the nut on the tap which has been stripped. Just be careful when doing this because channel locks can sometimes cause the pipe to break. Worst case, you'll have to cut the existing pipe and weld on a new section.

[@iamstphnplcnt]

Is this effective in broken piece of the pipe? I broke my pipe and the other piece got stuck inside. Reply asap thanks!!

[@FixItPhil]

Yes, you should be able to remove the broken piece of the pipe that is still stuck in the wall, as long as it contains the remaining threaded end.

[@lucciping2384]

For bathroom sink ....metal wallpipe broke ...how do I remove it from stub out ...it may have been glued because it's not coming out or turning ...where the threads meet

[@FixItPhil]

Hm, that's a trickier one because the thread may be sealed from sediment buildup, or as you indicate, glued with thread locker when it was installed. If that's the case you may need to heat the pipe with a heat gun or torch to break up the debris. Worst case the pipe will have to be cut and re-welded. If any of that sounds beyond your capabilities I'd call in a pro plumber.

[@lucciping2384]

@@FixItPhil thanks alot ...however without any damage I was able to slide out the washer with a butter knife ...and then just shimmied with a little twist and turn and safely removed it...I was determined ...lol...thanks again though.😎

[@FixItPhil]

@@lucciping2384 Awesome, glad you were able to make it work!

[@AshwanikumarSainiARTER]

Nice video tip here :-) Any other way from outside when inside is not accessable? I tried wrench over rupper but the rubber ripped and scratched the chrome finish.

[@FixItPhil]

Are you planning on re-using the pipe/nipple if you can successfully get it off? If not, you could cut the pipe so you have access to the inside, use the internal tool to remove it, and then replace it with a brand new piece. You can wrapping the pipe in one or two layers of duct tape to see if that can give you enough grip to put some torque on the pipe. Otherwise, I think all the external gripping options will likely damage the finish.

[@abrahamjebaraj3052]

How to remove the old trade which was broken inner side.

[@FixItPhil]

If it's broken within the wall, I think the only way is to open up the wall and see how the plumbing is arranged. If it's a copper pipe you may need to end up cutting and soldering on a new section of pipe.

[@salmu001]

What is the name of tools??

[@DharmaShakti130]

Good question & thanks to answerer

[@vasu615]

A GI nipple of 3/4" is struck inside a wall fitted to a GI collar.It is rusted and very tightly fitted.When tried, it didn't come out .Since it is deeply inside a wall finished with tiles, I am afraid that by still trying hard, the pipe inside wall may break leading to further problem.So how to remove the nipple.I tried rust removers but no help.In the video,the pipe nipple is almost at the surface of wall tiles,suppose it is 2 to 2.5 inch deep inside wall fitted to a GI collar, when tried,the whole collar and pipe may break inside wall but nipple only won't come out, in such situation how to remove nipple only.

[@FixItPhil]

It sounds like for your situation you may have to end up opening the wall. I know that sounds like a pain, but if your plumbing system is old and fragile this is the only way to ensure that if something breaks while removing and replacing the nipple, you'll have the opportunity to fix it. If you're uncomfortable doing that amount of work I suggest hiring a professional as DIY home solutions may not meet your needs or concerns.

[@kenzeier2943]

I have that tool but can't get it to work. The nipple thread is broken off in the elbow in the tiled ceiling. This tool won't grip it.

[@FixItPhil]

Hm, if you're working on one end of a broken elbow it sounds like you need to rotate in a different direction than this tool would offer. That is the tool can only grip the pipe along the direction of rotation needed to unscrew the pipe. In an elbow situation you would need to rotate across the axis at 90-degrees. In this case it might be possible to stick a screwdriver into the broken end of the pipe up to the bend then use it as leverage to rotate the pipe in the direction needed to unthread the end still connected to the rest of your plumbing.

[@billwilson6096]

Ken Zeier there is a tool for this situation, it looks much like a broken bold remover. Do some research and you will easily find the exact tool.

[@vasu615]

GI 3/4 inch nipple stuck deep inside wall to a GI collar , how to remove nipple,It seems ,there is chance of GI pipe being broken if tried hard to remove nipple.please help me

[@TheGonso35]

Spray/soak it with 10w40 let sit overnight and try to remove next day. Good luck!

[@junaidjaved5109]

Hey is there any way without that tool

[@FixItPhil]

You might be able to grab and twist the broken section with a needle nosed pliers, but the tool works great and isn't expensive. Generally available at most hardware stores, but also easy to find online. Here it is at Amazon: geni.us/gRtlBjz [Amazon Affiliate Product Link] or Ebay here: ebay.to/2MClljS [Ebay Affiliate Product Link] Good luck!

[@DreamVikings]

Yup thats the one. The cold water one.

[@Confidentialcomputing]

Yes. Was looking for this!

[@miguelmendoza8127]

Can you use the same tool to tighten it up again?

[@FixItPhil]

No, because the teeth grip/lock only when turned counter-clockwise. When tightening and turning clockwise, the teeth will "slip" and won't allow you to tighten the pipe.

[@miguelmendoza8127]

FixItPhil so how can I tighten it up without messing up the threads?

[@FixItPhil]

Just tighten the nipple by hand as much as you can, then thread on the valve to finger tight. Finally, use a wrench on the valve to tighten both at the same time.

[@saiyemoin]

I searched for this product but didn't find it.... Please help me to get this tool

[@FixItPhil]

You can get it at Amazon here: geni.us/gRtlBjz [Amazon Affiliate Product Link]

[@bmerenbloom]

When it comes time to install a new nipple, how it the world do you verify that it *will* not leak inside the wall (where the nipple screws into a drop-ear elbow inside the wall)? And when the whole faucet or valve or whatever is installed, how do you verify it *is not* leaking inside the wall?

[@nathancernovich5509]

You can check the shower valve for leaks by turning on the water to the house before you close up your access hole. As far as the connection to the drop-ear elbow, use a decent amount of thread tape and make sure it's screwed in tight. I guess if you really wanted to be sure, you can cap off the shower arm, turn on your shower (no water should be running since you capped it), and go look at your water meter to see if there is any flow.

[@5hawks]

Bruce M Use both teflon tape and pipe dope over it. It won't leak. Guaranteed.

[@GoFOAD]

Lifesaver!

[@majsharps]

That’s a job for vise grips!

[@AmarSingh-hl3sj]

Kha se milega ye tool

[@FixItPhil]

Main Amazon par khareedata hoon. Varnan mein link

[@a71_special]

why not use plumbing wrench with good teeth grip and clamp into exterrnal way

[@FixItPhil]

Depending on how much of the pipe is exposed, this may not be possible, or if only the threads are exposed, gripping and twisting them could damage them, the internal pipe wrench is useful for folks that might want to reuse the part.

[@narutoninja5771]

I broke the kitchen tap and the water was crazy af

[@stuntz0rZ]

I'm going to get this to use it once and then maybe never again. lol

[@FixItPhil]

Yup, just another "nice to have" tool for the toolbox, lol

[@Chris_dolmeth]

Just bought one and it just free spins in the pipe ffs

[@amjadma3887]

Thats ok but if the same tap broken from nipple in wall....h to removeit

[@FixItPhil]

Are you saying the tap cannot be removed? Or that the pipe nipple itself is broken? The tool should work on a broken piece of pipe still stuck in the wall (unless you cannot access it). But if you cannot get the tool inside the pipe nipple because the tap cannot be removed, you'll have to saw the tap off first, then use the tool inside the remaining length of the pipe nipple.

[@TheShangralaaaa17]

lmao that was neither stuck nor broken....

[@FixItPhil]

Lol, I can assure you it was super stuck. You'll notice I'd already changed the left one when I filmed this video as that was the one that had the exterior threads break off; I tried the tool out on that first to determine if this video was actually worth creating (because it would have been less than helpful if it didn't actually work!).

[@cobramanphil]

I guess the only way this will work is if the piping has a pipe nipple installed on the tubing...unless they are all done this way (sorry...amateur plumber here).

[@floki8382]

That would be the intended use for it. Internal pipe wrenches are made for loosening or tightening a threaded connection. For your shower heads and some faucets, those should have a pipe nipple where this would be used.

[@brandolino55]

Pliers for this exist

[@FixItPhil]

Sure, there may be a variety of ways to perform this repair. This is simply the one I choose for my situation that worked for me.

[@TnTrouble1994]

The worst tool for glued cpvc broken thread pipe that is stuck in a galvanized pipe!

[@FixItPhil]

Yes, this tool only really works on thread metal on metal connections

[@johndimawala2320]

Yo , i wish ive seen this vid sooner. :(

[@shadowk3]

This is how to remove a sink pipe, not how to remove a pipe nipple.

[@fitzwilly7132]

Why not just just use a pipe wrench on the outside of the nipple like any competent plumber would??? OH , but then YOU wouldn't be paid to show the manufacturer's name on the package of tools that are NOT needed!!!! How blatant and greedy can YOU get????