The Clever Tool Most People Have Never Heard Of

This clever plumbing tool is small but mighty, so why have most people never heard of or seen it? Let's take a quick look. #diy #plumbing #tools
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• The Hammer, Reinvented. • The Hammer, Reinvented.
• PEX Pipe: Plumbing for Homeowners: • PEX Pipe: Plumbing for...
• The Outlet Has Been Reinvented... And It’s Pure Genius: • The Outlet Has Been Re...
📦 PRODUCTS IN THIS VIDEO 📦
You can use the product button in the video or check out these links below.
• Great Priced Internal Pipe Wrench Set: geni.us/YwWXAd
• Alternative Higher Rated Set: geni.us/ogfiiE
• Pipe Wrench Sets at Home Depot, Lowe's: Click the Shopping Bag Icon in the video to go directly to these products
• Combination Wrench Set That Works Great with Internal Pipe Wrenches: geni.us/NNh97
• Milwaukee Fastback 6 in 1 Flip Knife (Amazon - Check out the "New From" section on the right for the best deals): geni.us/HgUx
• Milwaukee Fastback 6 in 1 Flip Knife (Home Depot): homedepot.sjv.io/e4ydK
Any link here may be an affiliate link, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q

[@cpierce3277]

I have had a set of three for 15-20 years , not used very often , but a lifesaver when needed !🎉

[@rayvaldes4627]

same here

[@GoodlyEarth]

This tool is amazing. I had no idea it even existed. Thank you Nils for making us all aware of it.

[@mortimersnead5821]

Restaurants have a lot of wall mounted faucets for things like mop sinks or service sinks. When you repair one, you often find yourself looking at a nipple with just the threads sticking out of the wall.

[@MarkR874]

I have a love hate relationship with these. They can sometimes be difficult to enter into an old rusted pipe, and the movable part of the tool often breaks under the stress of trying to remove an old pipe. Arghh! But ya, they can get you out of a pinch for sure. They have better versions of internal pipe wrenches but they’re a lot more expensive.

[@edbouhl3100]

Yep, broke on me the same way.

[@brodriguez11000]

@@edbouhl3100 I have two sets, one using the cam design, the other like an oversized screw extractor.

[@mpetersen6]

Another plumbing tool I've used for a non plumbing use is the Basin Wrench. We used them for tightening or loosening bearing retaining nuts before we had sockets specifically designed for the purpose.

[@pspadotto]

Definitely in the list of tools I wish I knew about before when I needed one. Currently in my Amazon wish list. 😂

[@LRN2DIY]

I know, right? It's one that I didn't know about for a long time and has come in handy now that I have the set.

[@billsmith2212]

It's a Husky from Home Depot . Amazon does 1.2 BILLION a day and is destroying ALL business . You can work there for $ 17 an hour and live in a rented GARAGE or live in your CAR !

[@ggsumner1947]

I bought a set of these in around 1970 to remove the remains of broken off mufflers in our lawnmower shop. A real time saver.

[@rawbacon]

I used one of these for the first time as a teen in the 80s and I think it's true that most people don't know about them.

[@tymz-r-achangin]

That tool typically will only work on new pipe fittings that havent been tightened up to its torque specs. Try that tool on pipe that has been torqued down and installed for a while after having water or other liquids flowing threw it

[@woodstream6137]

Another one for the kit, thanks!

[@CalvinPhuong]

I am planning on a pot filler install and did not know I needed this. This was so timely and exactly what I need.

[@myradioon]

"Measure Long. Cut Twice." You'll never be short.

[@chrisose]

I've had a set of these in my kit for at least 20 years. There are the best way to accurately set close nipples.

[@-DIYPRO-]

I will get it and definitely forget i have it until after I've screwed up the threads! 😅

[@pgriggs2112]

You’re an eccentric knurled knob! 😂❤

[@MB-ht9rb]

I have seen this tool but never knew what it was! Thank you for the information

[@Recon3Y3z]

i have a little one of those for removing the locks that the cable company puts on the line taps

[@RemoteCamper]

I install bath/showers. I have one that fits in to a showerhead neck. If I'm removing that pipe and the pipe breaks off leaving the threaded part in the drop-el. I can insert that tool and unscrew the threaded part. Life saver! I work with plumbers every day, and most have never seen this tool before.

[@vilefly]

It is also used in automotive. It is a spark plug tube remover/installer.

[@chandlerbraaten847]

Got a small one in my toolbox. Works great for removing oil filter adapters. Not needed often but when you do, you do.

[@csimet]

They are cheap and a lifesaver when needed. I've had a set for years and years.

[@aapex1]

Genius!

[@Mr.DMZ.]

Very neat

[@d.b.1176]

Cool, never seen that tool before

[@biffcorbot8839]

Not a plumber, electrician, but it's a good tool for rigid connections. Prob. gonna get one.

[@Nolaman70]

They make one for removing tub drains too. Most drains are missing the cross bars inside other tools use to remove the drain.

[@BFjordsman]

When I was a maintenance man back in the 90's I used one of these to get everyone free cable😂

[@flamencoprof]

I like it. Even though I never work with pipes, I can appreciate its utility.

[@ianbelletti6241]

A lot of times I use a coupling or a stacked pair of locknuts for that. It's a lot cheaper than having an internal pipe wrench for every size pipe I might use.

[@nuclearnyanboi]

genius!

[@steveolive9991]

You are right....I've never heard of it.

[@massacmongo995]

When you need it ,,,, you NEED it

[@jamesmulvihill6856]

Never heard of? I remember when my dad bought one back in the seventies. I don't remember when I bought my own but it has been with my plumbing tools for decades.

[@douglasskaalrud6865]

I use these for assembling PVC and stainless pipe without damaging the appearance.

[@randallthomas5207]

I needed one of these and asked the high school aged girls, working the counter for a nipple extractor. They screamed and ran away. A few moments later the older gal who normally did the books appeared and asked what I needed. I told her, and she went down in the basement and brought me back a set of three. As I was paying for them she apologized for her grand daughters. She wasn’t sure why they reacted that way. Even to her teenaged girls were strange.

[@Kissypooh]

You don't need the monotonous background music. Good info stands on its own.

[@crabwalk7773]

You forgot to mention a caution about using on pvc pipe. The burrs will likely damage or distort pvc pipes - fine if removing a pvc pipe to replace, but would not be good on pipe you wish to use.

[@earthling2007]

Yeah. Don’t use this on plastic

[@LRN2DIY]

Great point there. I didn't even think about mentioning that so thank you!

[@Geoff_G]

We had a whole set of those on the BC Ferry the MV Queen of Chilliwack, now operated by Goundar Shipping in Fiji as the MV Lomaiviti Princess 3. The wrenches are exactly what is needed for Close Pipe Nipples.

[@nickdibart]

This reminds me of a stud-extractor, very cool.

[@Torby4096]

Dad had a set of 3 of those!

[@bobmacgrath6651]

Interesring . This came up after i had to remove a piece of pipe snapped off flush inside a fitting. I wonder if a rubber version exists for pvc?

[@ivanleterror9158]

I have 2 of different sizes. also a set of Snap-On stud removers that are thinner bodied but work the same way.

[@vespadano1979]

It works a lot like a stud puller.

[@arfamortis1]

Had mine over 40 years, I also have a70 year old stud extractor that works on the same principle.

[@MrPGC137]

I've got one of those in my toolbox. Don't think I've ever had occasion in over 40 years to even use the thing...

[@BlackSoap361]

Saw a similar tool for removing split shotgun shells from a chamber, where the base had broken off from the hull.

[@BobMuir100]

Nils you amaze me! Or should I say never fail to amaze me.!!! I didn’t know this existed 10 mins ago and now I hope you make a $1m out of your videos!! 😏 I really want to thank you for all your work ……………before, today and tomorrow!!!!? Bob England

[@LRN2DIY]

You're always so kind, Bob. Thanks for commenting and for your kindness. It's always fun finding what tools/techniques people might benefit from online. Thanks for watching and we'll see you on the next one!

[@BobMuir100]

@@LRN2DIY cheers matey, as we say over here! Bob England

[@wittworks]

I see you. ❤

[@RichyN25]

my grandfather had one of these when I was a kid and I had no idea what it was

[@Arithryka]

I have one of these and never knew what it was for. (inherited) I've just been using it as a fidget toy 😂

[@theredstormer8078]

I had one of those lying around and I never knew what it was actually for!

[@LRN2DIY]

I don't think I would have figured out what it was for had I not known either. Funny looking little thing.

[@Metal_Master_YT]

Okay, I love this, I just found your channel, and I immediately subbed so that I can have this treasure trove of useful info later when I might need it! but I have a recommendation, can you make a new playlist on your channel featuring all the "tools you've never heard of" videos like this?

[@LRN2DIY]

Fantastic idea! I'll do that for sure. Thanks for watching, subbing and for the great feedback!

[@LRN2DIY]

I figured I'd better do this now before I forget :) The playlist is done and I'll keep it up to date as I add more! kzbin.info/aero/PLLP_SFbNnbSCvdDcLOatfDv3hiZ09U-xL

[@Metal_Master_YT]

@@LRN2DIY thanks man. also, feel free to call it whatever you want. 👍

[@kymberlilittlejohnwhite6603]

Your link on the end card doesn’t go to the 6 mistakes (thread tape) video as you state… goes to the using PEX video. All three are super helpful videos though! Love your tips and tricks and videos! Thanks!

[@LRN2DIY]

Good catch! Not sure how I missed that but I have fixed that now. Thanks so much for watching and I'm glad you enjoy the tips and tricks videos! More to come :)

[@mdunbar008]

I've owned a couple, but they always break after 1-2 uses.

[@JTA1961]

Sounds like a "pipe dream" to me

[@subtlename2873]

You could also use a couple nuts in a jam nut configuration...

[@firestunt]

I haven't seen one of these in years.I had one, but never used it, very limited applications.

[@maxpeterson8616]

I need a two inch, three inch, and four inch version.

[@berthongo8531]

I have a set of these I used quite often out in the gas fields on conduit nipples. Someone would have a stuck or broken nipple and I'd whip these out and bada-boom bada-bing. Done. Didn't need them often but when I did, they were worth their weight in gold.

[@davidelliott5843]

I have a female version that’s used for removing/fitting inner steering (aka track rod) arms. It’s like a big stud extractor.

[@1new-man]

The Home Depot link isn't working 4 me

[@aardiggrondig]

Very useful to learn about such a tool. Thanks. Nils, what I noticed in your most recent videos is background music. Can’t remember that to be the case in your older videos. My preference is strongly for no background music. I find it distracting. Which is a shame, since I really like the content of your videos.

[@hotshotshm3739]

Nice to watch and knew about this. Thanks for sharing.

[@LRN2DIY]

Thanks for watching and I really appreciate the feedback. We're trying some new things and mostly because I'm outsourcing the editing and told them to experiment a little. I noticed that on some of my videos it started to feel a little... empty almost, where I was talking throughout the video with no background music so we're experimenting a bit. I really appreciate you sharing your thoughts on that - it helps me out for future videos. Have a great week!

[@arashy]

@@LRN2DIYI prefer without the background music.

[@purdyboi8078]

I fully agree...no music please!!@@LRN2DIY

[@peteranderson3232]

You are fantastic Nils! Are you originally from Sweden maybe?

[@LRN2DIY]

Hi Peter, our family is from the US for many generations but originally from Sweden and Denmark, yes. My name (Nils Anders Rasmusson) is all from my ancestors.

[@peteranderson3232]

@@LRN2DIY ok. Whatever. Welcome to Sweden if you are nearby;-). I think you make great videos. It's interesting though that in sweden it's a big nono to have metal in most of all electric distribution system. But "over there" it's seems to be more of a standard? Keep up the good work with your video's I'm following you. Regards Peter

[@Johnny-tq9no]

My line of work we'd rather damage the outside then roughing up the inside for rigid conduit

[@RedSiegfried]

"Now I'll just give this a little turn .... " (cuts out several minutes of banging on the tool) "... and it will pop out."

[@snakie420]

That’s just a fancy easy out.

[@nelsonbrum8496]

Every vintage aircooled VW owner wishes they had a larger version of this tool to remove the factory oil fill sheetmetal from the aluminum generator/alternator stand... 😂

[@Sylvan_dB]

I would never use any kind of wrench on a close nipple. The internal wrench is going to cut the internal galvanizing. All you need is the fitting on the other end of the nipple and when you tighten that the close nipple will tighten both ends.

[@jordanrodrigues1279]

How do you loosen the far end?

[@Sylvan_dB]

@@jordanrodrigues1279 this was about assembly. Disassembly I do use a wrench on the close nipple and consider it scrap.

[@Ajme-kb4os]

great tool for diy. for a tradesman i would ruin the nipple and replace it quicker than using this tool.

[@JoShUa_J78]

$6 on Amazon for three different sizes

[@heathhill7802]

I have a snap on set of 4 , not a tool you use everyday not even every year. When you need it you got it !

[@olivier2553]

A c;ever tool. I doubt that on the stubble nipple the threads are going in different direction though, as you move to the other end, the thread is still in the same direction, only you see it from the other end. The tapper is different though :)

[@LRN2DIY]

You're correct that they're going in the same direction on either end. I just meant that you can't thread a fitting continuously along it because it switches in the middle to accommodate either end.

[@clytle374]

Good thing I know the correct name now, I've been afraid the term I always used "nipple extractor" would land me in the HR office

[@TheAzazzExperience]

Tell me why a thick layer of masking tape over the threads doesn't work...

[@ahumblepoet]

I see Ron Swanson.

[@CaptainEverythingHumorandMore]

Not at Lowes. It's a neat thing but I don't think I ever needed it. Probably for a plumper.

[@AtSouthEastMONKe]

uaed thees a coulpe times for broken pipes.. they kinda suck.. usually just replace the fittings.. with close nipples put wrench on fitting not threads

[@clutchpedalreturnsprg7710]

Hello, ah yes, the internal pipe wrench. Be sure to use the appropriate size.

[@hdpro66]

Nills, Home depot link "malformed". Doesn't go anywhere.

[@LRN2DIY]

Thanks for the heads up. Are you referring to the link in the shopping section, under the shirts? I just clicked and it's working fine for me so I'm not sure what's up with that. Where are you located?

[@bilmoe5856]

I've tried to use this tool. In theory it works well, but not in 100 y-o buildings. Which is where I mostly work. Great concept, but not all is cracked up to be, as any of you will find if you use it. Has its place, but not a miracle.

[@ginger_nosoul]

Wish a knew about this months ago dealing with my toilt valve Someone attached it half way inside the dry wall and just said "good enough" to the world. 🙄😣

[@WeighedWilson]

Looks like a good way to damage galvanized pipes.

[@yannkitson116]

Actually, you do want marring (within reason of course) on the thread because it holds on to whatever you need to leakproof the joint with.

[@JoeA1974]

As a master plumber with 30+ years experience I can honestly say that these internal pipe wrenches are *GARBAGE* ... throw that crap away 😂

[@randyblackburn9765]

I had one and it broke pretty quick . Most of the time nipples are 50 t0 70 years old and won’t turn out easily. Just as soon use an ease out and put in a new nipple

[@SuperVstech]

Nobody uses an internal pipe wrench for installing close nipples… ya just assemble the fittings…

[@scorchedearth1451]

Most people didn't hear of it because they don't need it.

[@Anne_Frank00]

Yaaaaa no

[@judih.8754]

What a great tool for close nipples!

[@bobeastrise]

service plumber for 35 years....... if your nipple is rusted these don't work, get yourself a internal wrench blade type made by Donald O Smith company

[@kleinjahr]

Most useful on broken nipples where you can't get a wrench on it.

[@Steevo69]

Hmmm, if only there were a wrench that has teeth to grip the body….I shall call it a pipe wrench. Look for it anywhere. It’s going to be great

[@TruthHurts2u]

Your wrench isn't much use if the pipe broke off flush with the fitting.

[@Steevo69]

@TruthHurts2u For sure, and at that point most of us have welded a bolt or nut in the fitting, the spatter is about as bad as any shards from.the wrench, but the wrench will be faster if you have the right size.

[@TruthHurts2u]

@@Steevo69 I've never seen anybody weld a bolt to a plumbing fitting.

[@Steevo69]

@@TruthHurts2u Really? Brass rod too, sometimes solder if they don't have anything else

[@LTCloud9]

"Nipple" tee hee.

[@lil----lil]

Sorry to burst your bubble, just wrap a rag on the threads a few times and be done with it, the "wrapping" on the threads creates hundreds of "gentle bites" and protects the threads at the same time bi-directionally. There is NO threads you cannot remove with this method. NONE. ZERO.

[@stevenmorris3181]

Bought a set about forty years ago...total crap imo

[@JACK-wh6jl]

THEY TRASH THE INSIDE OF PIPES !!!🤬🤬🤬🤬🤬

[@AldenRogers]

Useful tool, sure, not a wrench.

[@Beecher_Dikov]

They don't work well.

[@TruthHurts2u]

Same concept as a cam type terminator tool for removing some terminators on a cable tv tap.

[@timothygriffin9066]

Try that on one that has been screwed in for years and is all rusted. It sux