Thanks Sir sa Video. Laki tulong videos mo. Lalo na sa mga naka Vios Gen 2 na kagaya natin. More Power Sir and More Videos to Come. :)
@SundayBuddySolutions4 жыл бұрын
Salmat sir...
@mohdsupianmohamed5564 жыл бұрын
Thanks you for your info... I'm from Malaysia I like all video from you...nice...
@SundayBuddySolutions4 жыл бұрын
Thank you so much Mohamed.
@grechellopingol4 жыл бұрын
Salamat cabalen sa diy maintenance
@SundayBuddySolutions4 жыл бұрын
Thank you sir and God bless!
@jchrg23363 жыл бұрын
I don't think you want to put that sealant out of a tube on that surface, because the intake seam pieces against the cylinder head get really hot as the engine is in operation
@SundayBuddySolutions3 жыл бұрын
Hi J well noted but we used sealants that are designed to withstand extreme temperature driven by the engine.
@geraldrupido3 жыл бұрын
Thank you po sir very helpful po
@SundayBuddySolutions2 жыл бұрын
Welcome 😊
@socratesalegrado7453 жыл бұрын
have you clean the valve intake v/vs stem? this is must the carbon accumulated in the stem causes to block the air to enter the combustion chamber, on your video it seems the valve is not being clean, if ever worrying of carbon deposit drop to the piston top you can turn the engine manually until the v/vs is close
@rsamansec3 жыл бұрын
Dapat Boss nagreplace kayo ng bagong Throttle Body at Intake Manifold Gasket. Magkaka air at fuel leak iyan kung hindi na gaanong lapat mounts nila.
@karlrecca44014 жыл бұрын
Thanks Idol. :)
@Shahzaib-un5gl3 жыл бұрын
Modern intake manifold have sensor at the top, so you cannot use water to clean it, it can cause damage to electric system
@SundayBuddySolutions2 жыл бұрын
Hello! yes that is why the video is only applicable to toyota vios 2012 model. We advice to double check the manifold assembly carefully.
@keithong35683 жыл бұрын
After wash It need reset computer and do need WAit few hours for dry then install back ? (Toyota altis 2002 1.8cc)
@SundayBuddySolutions3 жыл бұрын
Hi keith. after washing the manifold, make sure to dry it before reinstallation. The computer will reset automatically since we have removed the battery. When you start the engine, expect higher rpm but it will go back to normal after 2-5 mins drive.
@yahrmajahsty52663 жыл бұрын
@@SundayBuddySolutions true
@bhekiematsebula93752 жыл бұрын
Excellent job
@SundayBuddySolutions2 жыл бұрын
Thank you sir
@delroyjohnson362 жыл бұрын
Thanks 🙏 Bossy🇯🇲👈🏾
@jeffremacalinao97044 жыл бұрын
Sir tanong ko lang nung naglinis ako ng intake manifold. Nagloko ung idle ko. Pag nka On AC bumababa rpm s 400. Tpos namamatay. Tpos prang may pumupugak sa tambutso pag nka park n umaandar. Nakadyot din pag nanakbo.ano kya problema? Vios gen. 2 din po. Salamat
@SundayBuddySolutions4 жыл бұрын
Hi good evening sir. Possible leaking or hindi nailapat ng tama yung intake manifold during reinstallation. you can check also the throttle body sir bka madumi n rin. Check nyo rin sir yung mga hose kung naibalik ng mabuti. and last is baka may naiwan pang water sa manifold at hindi n dry bago ireinstall.
@jeffremacalinao97044 жыл бұрын
@@SundayBuddySolutions check ko ung mga hose bukas sir. N dry ko mabuti sir ginamitan ko ng compress air tapos air blower tpos bnilad ko pa.tpos blower ulit bgo ikabit. Malinis nmn throttle body ko.evry 6months naglilinis ako. Nung paghugot ko nung maliit n hose s manifold medyo mahigpit xa.inalog alog ko lng kya nhugot.cguro don ung leak.salamat sir. Update kita if ano nging problema. Stay safe and God bless
@eastnicky96403 жыл бұрын
@@jeffremacalinao9704 update dito boss pano bumalik sa normal rpm mo?
@jeffremacalinao97043 жыл бұрын
@@eastnicky9640 sir. Problema nung sakin 2 sparkplug pundi. Kakapalit ko lng ng bago mga 2months plng.kya di ko maisip na sparkplug may problema.
@TheThushan2 жыл бұрын
Hi is this toyota yaris 2007 ? Plz reply. My manifold is damaged cant find it. Plz help. Many thanks
@SundayBuddySolutions2 жыл бұрын
Hello. Nope. It is Toyota Vios. As far as I know Yaris and Vios has the same engine because they are both under the same manufacturer
@TheThushan2 жыл бұрын
Sir Is it 2014 vios ? Made in Japan model ?
@SundayBuddySolutions2 жыл бұрын
@@TheThushan 2012 model yes Japan
@maclaireborlas3 жыл бұрын
Tanong ko lang idol, bakit nag ha high rev vios ko pagkatapos cleaning ko ng intake manifold atsaka throttle body?
@SundayBuddySolutions3 жыл бұрын
Hi Claire! It's normal to expect higher rpm after cleaning the throttle body. The reason is that the clean throttle body allows more air movement in the engine and in response, the computer system in the car compensates by adding more fuel. As a result we observe high rpm. So after cleaning the throttle body, turn on the engine and have at least 2-5 mins ride. after that, the Rpm by that time is expected to go back to normal. if not, try to consider other factors such as improper reinstallation, damaged MAF sensor, etc.... I hope this helps. God bless Buddy!
@maclaireborlas3 жыл бұрын
@@SundayBuddySolutions thank you sir
@BerettaM9USAF2 жыл бұрын
what is the gasket sealer brand?
@SundayBuddySolutions2 жыл бұрын
sorry for the late response, here in the Philippines the brand is Beta Gray sealant.
@reccakarl4 жыл бұрын
Anong Brand mg gasket sealant mo Sir?
@SundayBuddySolutions4 жыл бұрын
hi bro, " gasket maker "
@SundayBuddySolutions4 жыл бұрын
Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.
@SundayBuddySolutions4 жыл бұрын
Hanap ka n lang sa ace harware or sa mga local auto supply kahit ibang brand as long as gasket sealant sya bro.
@edward82973 жыл бұрын
Yan yung inexpect kong isasama sa paglinis ng throttle body nung dinala ko sa 1 shop yun auto ko.. (@_@) Anyways.. May iba pa bang paraan para malinis yan nang hindi binabaklas? May port ba na pwede pasukan ng carb/throttle cleaner? Or gas treatment na lang para madamay sa linis yan? Salamat. :)
@SundayBuddySolutions3 жыл бұрын
Best pa rin bro kung babaklasin para matanggal talaga yung mga carbon at malinis ng maayos ang manifold
@edward82973 жыл бұрын
Avanza auto ko. May port yun intake manifold from pcv. Oks lang ba lagyan ng filter yun? Saka yun isang port din na papuntang throttle?
@antoniotyjr89123 жыл бұрын
Gasoline or kerosene pwd po pang linis?
@SundayBuddySolutions3 жыл бұрын
Hi Anton you can use gasoline instead. Looking forward to hear your DIY experience God bless.
@SundayBuddySolutions3 жыл бұрын
Gasoline is better sir.
@mainsfortes57783 жыл бұрын
Linis !
@danmaverickmanalustresmani74942 жыл бұрын
Need ba talaga lagyan ng gasket sir?
@SundayBuddySolutions2 жыл бұрын
Yes sir para po di sumingaw yung hangin
@danmaverickmanalustresmani74942 жыл бұрын
@@SundayBuddySolutions pag sumingaw un hangin sir ano po cause?
@SundayBuddySolutions2 жыл бұрын
@@danmaverickmanalustresmani7494 possible di naibalik or nakapwesto ng maayos yung gasket.
@helviolopez18332 жыл бұрын
whit what sealant pls
@SundayBuddySolutions2 жыл бұрын
Beta grey sealant. It is a high temperature silicone sealant