THIS WILL MAKE YOUR CAR MORE RESPONSIVE

If you'd like to support this channel, which is never expected but always appreciated, please use this link: paypal.me/Vios...
THIS WILL MAKE YOUR CAR MORE RESPONSIVE is a detailed step-by-step guide on disassembly and cleaning of the throttle body and air fillter for better engine performance.
As a natural by-product of combustion, carbon inevitably builds up in the engine's throttle body and intake and exhaust systems. Thus, regular cleaning and is necessary to keep the throttle body and air filter in good shape and maintain peak engine performance.
As carbon gradually accumulates between the butterfly valve and throttle body, air flow gets impeded. This can cause rough idling and other issues. Failure to remove the built up carbon inside the throttle body can negatively affect the car's idling and overall performance. As gunk builds up engine power can deminish and cause increase fuel consumption. Overall, this causes a less than satisfactory engine performance and poor driving experience.
If this is your first time cleaning the throttle body, the information in this video will be helpful to you. If you have a different car model, you can still use the information in this tutorial because the same principles apply.
As always, please exercise caution and common sense when working on your car. Seek the help of a professional whenever necessary. This and all other videos produced and published by Viosified Car DIY are for educational and reference purposes only. Viosified Car DIY and/or its owner/s shall not be held liable for any injury, damage, or mistake that may result from the misuse of the information presented by Viosified Car DIY channel.
#ThrottleBody Cleaning #Vios
Music:
Almost in F - Tranquillity by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/

[@Viosified]

If you'd like to support this channel, which is never expected but always appreciated, please use this link: paypal.me/Viosified?country.x=PH&locale.x=en_US

[@patrishateodoro6841]

Wow! Very well made video as always. Highly detailed instructions! Thank you so much for your effort in making these vids! I enjoy watching your tutorials even though I'm a woman :) Good job sir! You deserve more subs and likes 👍

[@Viosified]

Thank you for the kind words, ma'am :)

[@mekteb.shemal]

WELL DONE ALYWAYS SHARE TOYOTA YARIS WORKS I LIKE IT

[@Rudolph25B]

Great video, very well detailed!

[@Viosified]

@@Rudolph25B Thank you, I appreciate it!

[@ibrax5]

Thank you sir you're the best

[@Viosified]

Thanks for watching & keep safe! 🙏

[@JayBar2526]

Superb!!!! Thank you so much for this video Sir. More More More !!!

[@Viosified]

Thank you sir 😊

[@jayramirez5374]

Fantastic very detailed 😊😊😊

[@Viosified]

Thank you sir :)

[@faisalalrashidi9655]

Thank you from Saudi Arabia

[@Viosified]

You're welcome. Thank you for watching :)

[@danarsaeed637]

Hi there! I've just cleaned the throttle body of my 2008 yaris considering all the steps you were doing on this video! But I noted the intake manifold is extremely dirty.. I was wondering shall I leave it that dirty or I need to remove and clean the manifold too! In this case i need you to make a video explaining how to clean the intake manifold. Thanks alot.

[@duongkien4837]

thank so much bro

[@Viosified]

Thanks for watching :)

[@jhonobra]

Mabuhay ka sir

[@Viosified]

Salamat po

[@diyiertv4352]

hi sir good day.. i am done cleaning my toyota vios TB,MAF sensor and PCV valve and it's success.. thanks a lot sir.. i just want to ask again sir if there is a check valve of brake booster or hydro vac and if it is replacesable.. i am trying now to troubleshoot my brake booster and it's very hard to find which one is damage the check valve or hydrovac.. thanks and godbless

[@Viosified]

Hi sir. That's good to hear 😊 Yes, there is a check valve at the end of the hose that connects to the hydrovac. You can pull it out of the hydrovac if you want to replace it. (Some vehicles have a check valve that is inside the vacuum hose itself. In others, it is in-between two vacuum hoses for the hydrovac. For Vios, it is located at the end of the hose that connects to the booster/hydrovac itself.) God bless!

[@diyiertv4352]

@@Viosified thanks a lot sir.. godbless

[@Viosified]

Welcome sir :) God bless..

[@diyiertv4352]

@@Viosified good morning sir.. can you make video on how to troubleshoot the hydro vacc and one way check valve and how to replace both parts..thanks

[@Viosified]

@@diyiertv4352 hi sir. If I may ask, what problems are you experiencing with your brakes? What car model is it? Tnx

[@marvelinoniem2557]

Boss pang Dual VVTi naman

[@Viosified]

Pag may chance po. Though, same principles and tools din po sya. Thank you for the suggestion sir :)

[@rompecolleoni]

Where is the IACV? I didn't see it does it have one?

[@Viosified]

The 2NZ-FE engine doesn't have a separate IACV. Instead, the ECM manages the idle speed through the throttle body's electronic throttle control. The electronic throttle control system adjusts the amount of air entering the engine by controlling the throttle plate's position electronically. The ECM calculates and adjusts the throttle opening to maintain the desired idle RPM

[@rompecolleoni]

@@Viosified Thanks. I am having problem with rpm going down instead of up when I turn on the AC that's why I asked. It started when I disconnected the negative terminal of the battery to diagnose my alarm. I relearned the idle back to normal but AC on rpm became abnormal.

[@rompecolleoni]

@@Viosified Do you have any idea where to start the diagnostic testing?

[@Viosified]

@@rompecolleoni If everything was fine before you disconnected the negative terminal, it could be the ECM still relearning. Drive around with AC "on." Everything usually comes back to normal after about 50 -100kms of driving.

[@rompecolleoni]

​@@Viosifiedit's been 3 months but the rpm is still abnormal when AC is on during idling. The engine jerks because the rpm falls. I don't know what to check now. Do you have anymore ideas as to why?

[@axenz1]

Thanks, but the audio music humming al the way 😁

[@Viosified]

Haha.. I'll check if I can still change it in the options 😁 Thanks for the feedback 🙏

[@trannam8114]

Can you tell me how the purge control valve works?

[@Viosified]

Hi. Thanks for asking. Well, in a nutshell, the Purge Control Valve is an important part of the EVAP system which helps prevent harmful gasoline fumes from escaping into the atmosphere and causing pollution. In modern vehicles like Vios/Yaris, etc., the Purge Control Valve is a solenoid that is electronically operated by the ECU to control the flow of hydrocarbon gases from the gas tank and charcoal canister into the intake manifold via a network of hoses. This system allows hydrocarbon fumes to get mixed with air and fuel in the combustion cycle by virtue of the engine’s intake vacuum. The purge valve is normally closed when the engine is "OFF" but when the engine is running, the ECU supplies the purge valve solenoid with the necessary voltage which determines how much the valve opens. This allows an appropriate amount of fuel vapor from the charcoal canister to pass through to the intake manifold and cylinders which is then burned inside the engine during combustion. This way the gasoline fumes is utilized by the engine during power production and emissions is regulated or filtered through the catalytic converter which minimizes air polution. I hope my brief explanation has answered your question :)

[@trannam8114]

@@Viosified thanks sir

[@Viosified]

You're welcome

[@vandercaber2683]

boss nag hohome service kba nyan?

[@Viosified]

Hindi po sir

[@busancun]

While spraying the cleaner, the plastic part of the body should always be put on the top to keep the liquid from leaking inside to damage the circuit.

[@Viosified]

@@busancun good idea. Thanks for sharing 🙏☺️

[@ronaldbitoon]

Hello mga sir, i just cleaned mine earlier and I noticed tumaas ng slight ung rpm nya after ng cold start, normal ba un?

[@Viosified]

Hi sir. Dapat po baba din sya sa normal after a few minutes. Usually po nirereset ang ECU after throttle body cleaning para ma-refresh po ang memory, lalo na kung naging erratic o malikot ang rpm. ECU reset: kzbin.info/www/bejne/aafMqXekgNF3nrc

[@ronaldbitoon]

Step 1 lng sir noh? A/T ung aken eh

[@Viosified]

@@ronaldbitoon opo sir, meron po additional info dun sa comments section ng ECU reset video para sa A/T.

[@ronaldbitoon]

Parang ok nmn na sya sir, step 1 lng gnwa ko, thank u so much

[@ronaldbitoon]

Iwas gastos din sa labor

[@Viosified]

Recommended Tools/Products: amzn.to/3rGcBML FOXWELL NT301Professional OBD2 Scanner: amzn.to/3sBa6KW ANCEL OBD 2 Scanner: amzn.to/3JiCiZU Fully Automatic Smart Battery Charger: amzn.to/3gCbKGP Digital Tire Pressure Guage: amzn.to/3GKsmqe BOSCH Wiper Blades: amzn.to/3uH8Qss Bumper Retainer Clips: amzn.to/3LuuK88 Fully Synthetic Motor Oil: amzn.to/3szZjAF Panel & Trim Removal Tool Set: amzn.to/34Sw9o8 1000 Amp 12volt Car Jump Starter Pack: amzn.to/3JiEsJ0 Phone Mount for Cars: amzn.to/33hwYXs FOXWELL NT301Professional OBD2 Scanner: amzn.to/3sBa6KW VACLIFE Tire Air Inflator/Compressor: amzn.to/3JnGpDQ AT-205 Re-Seal Stops Leaks, 8 Ounce Bottle: amzn.to/3Lttu58