How to Remove and Install LS Cam Bearings With Rotating Assembly Still In!!!?!?Can it be done??

[@brick88nose]

Just stumbled across your channel. Keep up the good work.

[@bradyteneyck]

Thank you so much, more content to come this year.

[@joeyrangel228]

Dude you're awesome I'm doing the same thing, i don't wanna pull the crank i bought a running engine but just wanna swap cam and run it

[@bradyteneyck]

@@joeyrangel228 you bet! Engines still running strong! Just take your time

[@DELTRANIO99]

Good vid ,,Is it possible to sneak the crank out leaving the pistons and rods still in ?

[@bradyteneyck]

@@DELTRANIO99I mean ya, undo the main caps and rod caps and should be able to pull it out

[@akp41]

Did you add a light coat of lube to insert the cam bearings or installed them dry?

[@bradyteneyck]

Pretty sure I went in dry

[@nharris25]

Does the bearing bore have a lege or do they just get centered?

[@bradyteneyck]

You have to make sure they are straight as possible and the holes are level with the oiling holes in the block You can definitely mess it up

[@jeremiah_c10]

Are those standard size bearing looking for some for my gen 4 Ls gunna use a big cam for my build

[@bradyteneyck]

Yea these are standard size bearings for a gen 4 block

[@jeremiah_c10]

@@bradyteneyck I’m thinking of ordering that cam bearing tool off Amazon any issue with it ?

[@bradyteneyck]

It worked great for me, I enjoyed it. I borrowed this tool from a buddy but if I have to tackle this again I would buy one. It a little tricky doing it this way, not bad at all if you patient and this tool I felt was the right thing for the job vs a solid deal. @@jeremiah_c10

[@LayLow-j9r]

What's the name of the tool u use for the cam bearing

[@bradyteneyck]

Cam bearing tool, it was a universal one

[@bradyteneyck]

www.amazon.com/Bearing-Install-Complete-Installation-Removal/dp/B0CJDVL1XF/ref=asc_df_B0CJDVL1XF/?tag=hyprod-20&linkCode=df0&hvadid=685494780617&hvpos=&hvnetw=g&hvrand=10640672949656661303&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023890&hvtargid=pla-2267756597224&psc=1&mcid=a10cca9e9ccc39db86bb44f498c6ea6c&gad_source=1

[@bradyteneyck]

pretty similar to this one

[@jasonruizsrable]

Who make the tool or brand of tool

[@bradyteneyck]

If you google Cam Bearing tool, theres a bunch like it, this is a multi purpose one, they also have them made for an LS

[@a7yo2vince7]

i got the same tool from amazon for about $60

[@Clean_carz]

You think this will work with a gen 3

[@bradyteneyck]

Yep just get the right bearings