How to Remove and replace Reynolds Freehub Attack Assault Strike

How to remove and replace Reynolds freehub and cassette.

[@havefunandbikestuff]

I've heard that hub is identical to the sram s60 hubs of 2012...I plan on upgrading my 10sp to 11sp soon like this

[@davidzambrano6695]

Hello Greetings from Panama I have identical wheels to the ones in the video and the cassette has a lateral offset I would like to know how I can correct it

[@josearodriguez4000]

Hi GOD BLESS YOU !!! Thank for the video question I have the same wheels but 10 gears so I switch the Groupset to 11 speed I have to change the free hub so which one is compatible and better one 😅

[@snoopda1andonly]

Just get an 11 speed from Reynolds. They go from $80 to $110

[@josearodriguez4000]

I got a campagnolo Groupset for it so can b campagnolo with the campagnolo cassette 😬

[@snoopda1andonly]

@@josearodriguez4000 I believe Reynolds has the freehub. Just go to their website.

[@The_Gman9123]

Hi I run these same wheels and noticed some play in my front hub. I'm guessing its the bearings but when I use 2 Allen keys to try to unwind the end caps they are tight, real tight im just wandering if you know what the problem might be, before I break something? Many thanks from N. Ireland

[@jesseladd6864]

If end caps are tight or loaded correctly, check bearings for condition. They likely are not smooth and need replacing as they have play. If they are very smooth, check with bearing press to make sure they are seated in the hub shell correctly

[@josejauregui9380]

How i can replace de bearings? I can’t take off the axle

[@wasedadori4080]

did you find out how to replace the bearings? I'm having the same issue...

[@gerrypalomares3299]

Possible to change the 11 speed spline to 10 speed spline.... Reynolds wheel set... Thank you so much.

[@snoopda1andonly]

Do you mean the hub? If so, the 11 speed hub is compatible with a 10 speed cassette. You just need a hub spacer. It costs a few bucks at a bike shop.

[@inavicu]

Hi, thanks for the video, did you find a thrid party reynolds free hub?

[@snoopda1andonly]

It was not a third party. I got it directly from the Reynolds website: reynoldscycling.com/products/reynolds-11-speed-freehub-body?variant=44092099661

[@hydriarief9261]

hi, how to remove axle of body freehub . i want to change bearing my assault rear wheel, thanks

[@wasedadori4080]

did you find out how to replace the bearings? I'm having the same issue...

[@redranger1981]

How do you hold back the pawls to get the body into it?

[@mchacon01]

You don't have to hold them back. It just slips right in. I had no issues doing so.

[@ozt3222]

Hi did you figure out how to hold the pawls back? I cant get my Freebody back in.