Рет қаралды 149,028
Video tutorial on how to remove the headlight assembly on a BMW E39. This procedure applies to the pre-facelift version found between the years 1996 and 2000, but the similar procedure can be applies to the facelifted version 2001 to 2000. This particular tutorial was done on a 1997 BMW 540i.
Website: 4diyers.com
Facebook: / 4diyers
Google Plus: plus.google.co...
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-8mm 3/8" drive socket
-6" 3/8" drive extension
-3/8" drive ratchet
Procedure:
-start by opening the hood
-remove the high beam and low beam wiring harness plugs from the rear of the light
-remove the four (two on the top, tow towards the bottom), 8mm bolts
-both the top and bottom bolts are a different diameter, so do not mix them up
-pull the headlight assembly from the grill side first, the fender side of the headlight is clipped into the fender
-once you have the headlight assembly slightly out, remove the parking light wiring harness plug
-pull assembly straight out
-in order to remove the lower plastic painted trim piece, start to pull from the fender side of the headlight assembly, there will be two clips on the bottom side
-then depress the clip on the grill side (three clipped areas in total)
-the trim piece will then be separate from the assembly
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.