This is so thoughtful. It's like having that smart guy next door helping you. Of course I subscribed.

Awesome video very well laid out and to the point 😊

Even the ball joint separator didn’t divide them for me 😂

I love seeing the before and after when something has been restored, it looks beautiful 😍

The video explicity mentions that it is common to have limited access to the clamp and that you probably won't have the correct leverage, yet it cuts the clamp with the bulkiest of the tools he presented... 🙃🙃🙃

Great video!🤝

Good video man thanks for taking the time to share. On the conversion part you skipped from 1/2” to 3/4 skipping 5/8 and 16mm 5/8+.005” is 16mm. So much closer than the 10mm & 3/8 which Imo is too big of a gap and asking to round that 10mm fastener

Can you add a link for the eBay page please?!

Well here's a new issue I went to the store and for the last few days my battery was showing a little weak but not severe and then I tried to start my car and it barely cranked over I made the mistake to try to keep cranking it thinking well it'll catch and what it did was decoded my module because the battery was so low well I won't make that mistake again right so if you have a weak battery you find yourself in this position stop get it jumped have the system checked out don't keep trying to crank it thinking it's going to turn over!

Fixed mine thanks sir!

Thanks😮

Amazon affiliated links for the hand impact driver: US: amzn.to/4fBtEpZ Canada: amzn.to/3YZVaGG UK: amzn.to/3OjXdQG

So simple but effective, just saved me with this bro! Subscribed!

My advice to you is speak a little slower in your videos so people can understand what you’re saying, good luck.

Thanks stranger

I do repointing work and the raking chisels at my job look like they havent been sharpened since before I was born and it drives me crazy. Had to search through tons of wood chisel sharpening videos before finding yours, thank you!!

Thank you for an excellent, straight-to-the-point guide. Very much appreciated.

My wife just ordered a brand new lock cap on Amazon puts in on while I'm at work twist it on without the key locks it and now she can't even put the key inside to unlock it and I'm at work she's yelling at me like it's my fault.

😎Good video,same truck as mine. Thank you. 👍🏼🇺🇸

Do you risk damaging anything with a voltage tester if you picked the wrong positive end?

And there's a option in settings where you can screen record

Add a Volvo 2000 model C70 convertible orange flashing

Good solid refurbishment.

Hey man what does it read form the Obd2?

This video is a few years old, but what did you do about the 4596 smoothness code?

I apologize 😂

Can you remove the A pillar trim without pulling away the door gasket? Tkx.

Hot to install headliner in a first gen Tacoma?

What Material is that rope made of?

How do you drop the fabric plate on the inside? I disconnected the front clips but it does not slide back into the roof

Volvo engineer dumb

2013 volvo c30 wheel lug nut torque

what about the rear drains??

Did you just say E91 ???

how this overcomes thermostat? are you able to diagnose large circulation - with heater core? or just small circulation expansion tank/hoses to the water pump and radiator?

thank you mate

I have this tool at my house but I had no clue what this for, now I know thanks

I have an original key fob with no screws

Hey bro does the brake bomb have anything to do with loose steering wheel? I have replaced literally all the suspension components and the box! Got the box from a perfect good donor with no loose issues and soon as I install the box in my car, play started lol crazy and frustrating

*eso es todo / that's what i'm talking 'bout* actual translation "that is all" but that's the meaning of the expression

Thank you 😊😢

dude you forgot brake grease

Halo …. What kind is the rope ? I want to buy , what is the name of the roes ..?? Thank you

Hiii what is the name of the rope ?.

❤❤

Forget that camber tool thats insane. Just go to home depot and get the small quare digital level. Then go get an alignment and either get a print out of your alignment or take a picture of the computer results. Cause they going to say thier printer dont work at any firestone you go to , Then go home, and look at the paper if your front right wheel is -8 camber on the paper . Jack the car up and take the wheel off and place the new orange digital home depot square level on the rotor cause it has a magnet on it, and what ever the number is , just move your camber bolt+8. The end. Thats how i do mine , it took me a year to figure out a way to set my camber i did all type of stuff man. All my camber is 0 on all four corners nowadays. Thats really the only way. Just got to get another alignment after you set it. But firestone lets you come back. So it ain't like you have to pay for another alignment.

Well, maybe I'm stupid. Couldn't put the spring back in this piece of art of engineering.

Thanks ! The part that the two screws screw into is broken.. now I need to find out what this part is called and how to replace it .. sigh

Is it necessary to disconnect the battery?

Love your channel! Which MERCON did you use in your 98? Book says MERCON V, but my mechanic just used MERCON LV, when replacing my PS (2004, 3.0L). I called Ford, they said change it to correct type. Is this going to make a real difference, in your opinion?