How To Remove Door Handles On A Hummer H3

Here is an instructional video on how to remove the door handles on your H3. Let me know if you have any questions in the comments!
This video is for entertainment purposes only.
This video is only for the Hummer H3 and H3T. Not the H2 or H1.
Instagram: / acer4lo
MY BUILD THREAD: www.hummer4x4o...

[@onlyreallove17]

Great job!!! You are the ONLY ONE out of several that actually described everything properly and where we can actually see what you're doing! You are AWWWESOMMME!!! THANKYOU!!! Bless You, Dear🕊️

[@4lowmode]

No problem! 😁

[@larryb95]

The more videos I watch the more I'm loving my h3. Most things are so simple as far as fixing or customize. The hardest thing so far was the full front end led conversion...but you helped me with that threw these videos and couple messages threw Instagram. Everything else is absolutely simple....can't wait to get a h2

[@tomfasano9082]

Your videos are fantastic! I haven’t had an H3 since 2010 but I will be on the market this summer for another one and I plan on using your videos quite a bit. Thank you.

[@uptownwebsites9549]

Thank you! Awesome tutorial :) This helped out greatly! I'm glad I didn't take my door apart troubleshooting it on my own before I watched this.

[@iChezaday]

Nicely done! You're hired!

[@InsultAlienLP]

Thanks man! i just did my front with bedliner as well, next step is the door handles and the mirrors :)

[@martinhernandez6506]

Good morning, thank you for this very informative video ! I just came across your channel. I just got an H3. I'm eager to see your modification videos.

[@4lowmode]

Glad it was helpful!

[@waynehutchinson1423]

Thanks bro..this was perfect. I did like and subcribe. .your presentation was fluent and your instructions and added advise helpful.Keep making vid's.

[@4lowmode]

Thanks! I'll keep the vids coming!

[@dumpatrumprapist9302]

Love your hummer h3...still working on getting one

[@freeman573]

Very straight forward and informative, good video...

[@InCountry6970]

Again, very good video, damn you have this video instructions down to a science.

[@VSMOKE1]

I would drop the screw and turn a 5 min job into 1hr job. Great video

[@4lowmode]

Haha yes! Haven't had that happen to me before luckily. That is why you definitely should use a post-it note!

[@4LoBando]

@@4lowmodeI dropped mine help please

[@randysimmons5536]

Always well done how to DIY videos from you explained 👍 👍

[@ccbusiness9333]

I really love and appreciate your videos. My source for H3 DIY.

[@tpbulle]

They should sell 10mm sockets in a 20pack, seriously..Great vid. I have the chrome package and I'm considering using Line -X on all the chrome

[@4lowmode]

I would! I don't like chrome at all!

[@jda1unv]

How does it hold up on the chrome

[@tpbulle]

@@jda1unv I considered it, but, decided against it

[@hwally777]

Thanks for all the great videos.

[@4lowmode]

Thanks there will be more to come. Working on editing some this weekend!

[@shawniebeans8382]

That paper trick is genius!! 🤯

[@tristanblock]

Great tutorial! The trick with the post-it note is a nifty trick, thanks!

[@Mr.T-q4d]

Super informative! How do you replace the H3 rear door handle/end cap?

[@matthewcreech8259]

Do you have to prime the handles before painting?

[@Ricovette]

Good Job! Excellent Tutorial! Thumbs up from me as usual... Stay safe... Rico

[@dbrady1966]

Outstanding info thanks

[@paulmata5056]

Always wondered how to do this---thanks for the info!

[@4lowmode]

No problem! Thanks for watching!

[@jerseyandhernomads]

Thanks for posting,I need to replace two handles on my H3. Would you know how to replace the cargo door handle? I can't find anything on it. When I took the inside panel off it looks like there isn't a way to get in the area of the door handle. The holes are to small to get in there. Any information would be greatly appreciated.

[@ishc3413]

Great video man... keep it up

[@jgrenwod]

Love the post it note trick..

[@espineir]

Great video!!!

[@SuaveOwnsIt]

Yo I’m glad I found you ... can you do a walk around off your rig soon 🤍🖤

[@rcjunkyard5253]

Could you make a video about the Side Makers on how to replace them? No video on youtube about them.

[@jesseb.sullivan8542]

Hi, Currently Doing This Same Modification. However I Have A Bolt That Is Stuck To The Thread Of The Smaller Part Of The Handle. The Smaller Part Of The Handle Is Off But The Thread “Sock” Holding The Screw (Hope That Makes Sense) Is Stuck. Tried Using Multiple Pliers To Hold That Piece While Unscrewing The Bolt But I’ve Had No Luck. Considering Taking An E-Z Out Drill Bit To The Bolt But I’m Concerned & Hesitant As I’ve Seen Most Videos Emphasize NOT To Lose The Bolt In The Door. Is This Exact Bolt Irreplaceable? If Not, What Exact Size Bolt Is It So I Can Replace It? If It IS Irreplaceable, What Can I Do Next?

[@Brahbrahbrah]

0:43 I just noticed the widow buttons in your door are placed in a different location than mine. In mine the switch panel is completely horizontal but yours are at a 45 degree. Any insight on why some have a different location?

[@АндрейСтрельцов-ю3ю]

Great video! Thank you!!!!

[@bryanortiz4960]

Hello 👋 Is it possible to put a h3 5 cylinders 09-10 front differential to a H3t alpha ? I have a hummer H3T alpha 2010 and my front differential doesn’t work any more, what can I do to fix my problem? I tried on looking for all the parts of the differential and fix it but I couldn’t find all of them , and I was looking to put a front differential from a H3 5 cylinders but i don’t know if that’s possible, what can I do in my case?

[@fahadalmunifi4364]

Thanks for this tutorial.. and kindly can you help us with tutorial about how to fix the wiggly side mirror , I think my problem from the screws to the body Because the Whole side mirror with the handle keep wiggling Thank you with best regards

[@SuaveOwnsIt]

Also how do you remove the d rings .. what tool ?

[@Ericosmith27]

Thank you sir. Great video

[@AlexS-dj4vf]

great video. I'm doing this.

[@vegasbrit9440]

Hi, thanks so much for the useful info. I’m strongly considering plastic dipping my H3, previous owner had a corporate wrap on the entire thing & it’s been sat out baking in this S.Nevada ☀️ so needs a little help. Any idea how I tackle the flaking chrome on the door handles to prep them for primer & then plastic dip? I plan on covering all the chrome, I find it somewhat gaudy & dated.

[@4lowmode]

Thanks for watching! Not really sure how to take on the flaking chrome when it comes to plastic surfaces, but since you don't like the chrome, you could always just sand it off and use real paint. Plastidip definitely works great and I have used it a bunch before, but if you never have the intention of reverting it back to chrome, real paint might be easier to deal with the flaking. That being said there are spray paint brands out there that offer a Chrome-like finish, but it would be hard to guarantee that it would come out 100% perfect.

[@vegasbrit9440]

4 Low Mode Hmmm you’ve given me food for thought & other options to look into for handles, mirrors & the gas cap,TY. I’ve been watching a ton of tutorials from dipyourcar.com also, but all projects have been done on vehicles without any imperfections. Appreciate your input, I’ve much to learn still!

[@4lowmode]

@@vegasbrit9440 No problem! Glad I could help!

[@rednecktrucker8866]

Could you do a big favor and show do a video of you taking the mirrors off the h3 need some help on it

[@damienskyz5692]

How to add the gas tank hummer cap or to remove to plastic dip the original one

[@J.Crooner]

This is an excellent video, is the process basically similar or the same with the H2 model too? I surely hope so👍😎👌

[@steelmartin3197]

does the spray ever rub off the handles?

[@4lowmode]

Depends on how you good you apply it. You do need to sand off the chrome so it is bare in order for the stuff to apply better. Also apply multiple coats! I would recommend Dupli-Color ETR250 Bedliner spray. I have had it on my H3 Grille for 4 years now and looks great. Do not use Rust-Oleum 248914 Auto Truck Bed Coating. I used it on my mirrors and hood louver and the stuff is flaking really bad less than a year later. Link to the good Dupli-Color stuff: www.walmart.com/ip/Dupli-Color-ETR250A07-Truck-Bed-Coating-Aerosol-16-5-oz/114014920

[@austing3419]

Can you make a video showing how to remove the taillight covers?

[@JustinFrascona]

I don't even own a hummer but I'm watching

[@4lowmode]

Haha that's awesome!

[@scottdinning2575]

great video, make more! liked and subbed. also what sort of grill cover do you have?

[@VDawg-cr1gb]

Excellent. Well done

[@CAP21]

Great video instruction Bro👍 Great detail tips. 🍺

[@4lowmode]

Thanks!

[@justuscortez5091]

Thank you!

[@jessechongkee8483]

Great video 🤙🏼

[@4lowmode]

Thanks! Many more to come!

[@josephruiz4167]

its perfect bro thank you

[@platovacio7583]

Can you make a video on how to remove mirrors like drivers side.

[@TheThoover]

I hope he does that as I need to replace one also

[@tylervarnon1787]

I need to remove my mirrors soon, any idea how easy those are to get off?

[@4lowmode]

It is not that bad. You have to remove the body panels which aren't as bad as they seem. There is actually a youtube video already on it. It is not that great since it is just a picture slide show; but it gives the idea: kzbin.info/www/bejne/mKLcgHx3ird6eJY

[@TheGoose31]

Awesome thx!

[@jamesray3920]

Eastwood Plastic Resurfacer Matte Black Aerosol dose a real good job of tirning you black plastic back to new it's not a paint last long time i have tried many other brands that don't come close to this product

[@drkrypton4410]

You mention the gate handle and not being able to open it. Yeah, that just happened to me. I have a 2010 h3 base. How do i get it open?

[@4lowmode]

I am note sure actually. I haven't had that happen to me. Could you try putting sliding back in the handle into the tail gate and opening it? If not, you might need to use a coat hanger or something in the shape of a hook like the orignal door handle to get it open. Unfortunately, there is no emergency trunk release since the cargo area is technically not separated from the rest of the cabin and it is not required to have one.

[@drkrypton4410]

@@4lowmode well unfortunately i closed the door before i tested it. I also had the rear drivers side do the same. Ill take it to the dealership if i have to. Thanks for responding.

[@engeng7058]

well done bro

[@JankedBeef]

One of the 10mm screws is loose but it won't come out. What do I do?

[@4lowmode]

The thread on the smaller part of the door handle has probably seized to the bolt. When you tried taking it out, you probably broke the thread free from the plastic handle piece that was holding it in place. You'll have to brake that smaller piece off because its already broken, and then hold the thread with some vice grips while loosening the bolt. I have had that same thing happen to me before.

[@JankedBeef]

@@4lowmode hey it worked thanks man appreciate

[@Ahmed.Adil.]

Ur amazing man ❤️❤️luv u

[@eriewriter5743]

my door handle will not latch on to anything now when I put it back in door. Just pulls out and does not open door... Please Help!!!

[@4lowmode]

That's strange. Are you putting in as far to the right as you can in the hole and then sliding it in to the left?

[@nassirhussein9438]

How many miles do you have on that HUMMER?

[@4lowmode]

252,00 at the moment! I have the H3 Alpha which has the GM 5.3L so it is still the original engine. They are good for 300k-350k.

[@nassirhussein9438]

4 Low Mode Wow! Still new, you should clean your sunroof drain holes soon to prevent them from clogging up. DM me if you wanna know the locations.

[@4lowmode]

@@nassirhussein9438 Are you talking about the rubber gromet pieces that connect to the firewall? If so I have already cleaned those out and drilled a hole in them to allow better water flow.

[@martinhollins7727]

@@4lowmode Video of how to do this?

[@mtbtravelers9922]

I have a 2006 Hummer H3. For the last 2 years I've had RPM issues. I added 20" rims with 35" tires. I've taken it to 6 different places. They are telling me that the torque converter is getting confused between 3rd and 4th gear because the tires are to big. And apparently there is no program that can calibrate the speedometer for a 2006. I have had this thing gone over time and time again. The transmission was rebuilt twice because the original shop thought it was transmission issues. But its not. It's hard for me to believe that I would have a problem like this due to the tires. But that's the only legit answer I have gotten over two years. No engine light or codes showing up. This last place is a very well reputable place that I took it too. They had it for 30 days. Any ideas other than the tires?

[@4lowmode]

35in tires shouldn't be affecting it that much, but if you want to give it a try, there is a program to calibrate the speedometer. Its called HP Tuners, its a tuning software for many different types of vehicles. How it works is you need to buy their OBII device called the MPVI2 and then you will need to buy 2 credits. You redeem your credits to your specific vehicle. Then you have access to change hundreds of different parameters in your vehicle, like tire size, transmission shift points, gear ratio, fuel to air ratio, etc, etc, etc. You can usually find the MPVI2 and 2 credits bundled together on amazon for $350-$400. Changing the tire size only takes like 2 minutes, but if you want to do more complicated things, it might be better to go to a performance shop it get it tuned instead of getting HP tuners device/credits and doing it yourself. If you want to go this route, look for a shop that tunes GM vehicles like corvettes and camaros. Again, I really don't think the 35s are causing all of this. When H3 owners upgrade to 35s they don't usually bother with a tune unless they are putting on 37s.

[@mtbtravelers9922]

@@4lowmode thanks for the info! It's getting really frustrating that I've taking it to 6 different places.

[@sandromake]

Grazie

[@Humman135]

Сделай обзор на свой хаммер и расскажи подробнее про него!

[@4lowmode]

Да, я скоро сделаю это видео! Я давно хотел снять это видео. Извините, если перевод не так хорош!

[@Humman135]

@@4lowmode а ты ремонтировал раздаточную коробку?

[@johnnydream540]

Please friends, I have Hummer H3 2008 some time not start until 10 minutes less or more Please I need some help

[@MyNamesMonkie]

Lmao I’m dying that I invented this shyt

[@jasonpletcher3018]

Why didn't you clean the area before you put it back lol.

[@alanalcala4506]

Question!!! My handles are not chrome but they are really faded, all my plastic parts are. Would you recommend repainting them or how can I restore the look on it??