How To Remove Door Panels in 2nd Gen Toyota Tacoma

[@Tacomaholic]

Help support the channel AND grab some wicked Tacomaholic and TRD Amateur merch here: tacomaholics.com/shop?olsPage=products

[@jaytrock3217]

I was just going to add deadening materials and clean my panels. Thanks.

[@Tacomaholic]

Which sound deadening material did you go with?

[@jaytrock3217]

​@@Tacomaholic I used Noico 80 mil on my roof and behind rear seat pretty happy with it. Amazing how much it killed all that noise with the rain. I will probably do the same on the doors. Next will be the floor which I might not do if the doors help a lot. Really dreading removing everything to get to floor.

[@Tacomaholic]

I'm running the same stuff. Love it! I've done behind my rear seats, the floor behind the underseat storage bins, and the 4 doors are next. Will eventually do the roof and entire floor too.

[@jaytrock3217]

@@Tacomaholic Yes, it is great stuff. I have 2008 that I bought new and with less then 90k on it. I used it mainly as a work truck for when I work for CalFire since everyone didn't enjoy the experience as much as me. Noise was always the issue with the love ones. Me I never cared because I always had music blasting. Now I am trying to use it more as my vehicle of choice for family adventures since the Jeep is to small for the bigger kids now. I so want the tech and transmission of a new Tacoma but with the 4.0. Until that happens I am stuck with a gen 2 making it better.

[@JeredGutierres-jm5ot]

Great video. Very easy to follow along with and made my project much easier. Thank you

[@pennilessjester211]

Thank you for taking the time to upload this it’s very well done I have to do the front pair on mine especially because the panel slopes up toward the front above the glass seal and I’m removing and replacing the window tint that the previous owner definitely didn’t have done by a pro

[@moemdown]

Thank you for keeping the video up. Doors can be a pain to figure out. This made it easy. Liked and subscribed.

[@RiderObvious]

This tutorial should help many people, even with other makes and models of cars, as the process is similar. Good job.

[@Tacomaholic]

Thanks!

[@jamessandifer3405]

What seat covers are those or is that factory leather? I have a 2006 in need of some protection. My cloth has torn or wore through in a couple of places.

[@Tacomaholic]

Actually a full seat swap! kzbin.info/www/bejne/pJaqhniZqrypm6s

[@Tacomaholic]

Oops just checked and I was still running the plain factory seats here.

[@jroegiers]

Thank you for this video. Just replaced my 07 with a 2015. Needed to clean some Pepsi or Coke spillage from the speaker section of the door panel. Success today! Thank you. Love the channel and your passion for everything Tacoma.

[@Tacomaholic]

Thanks Jim!

[@jhz55]

Thanks Tacomaholic. I got a mix match of Kenwood, kicker, and the Subaru tweets. going to be installing them this weekend with the stock deck. This is exactly what I was looking for, not trying to win any stereo competitions, just increase the base quality. keep up the good work and I always look forward to your next videos. FYI, love the secondary air intake video, I did that one too. 3 years in, no problems. 2015 , 2nd gen, v6 taco.

[@rickyfleshman7856]

Glad you still had this video up lol getting ready to upgrade my speakers Made a comment order off your other sight thanks brother and nice truck

[@scottgorman7166]

I watched the speaker install first which was great. This video showed how easy it is to get the panels removed. I have a 2022 and I'm wondering on the removal of mine if its close to the process of yours? We'll see.

[@Tacomaholic]

I bet the process is very similar if not identical.

[@danielkahla1738]

Since you're doing a speaker replacement it is a opportune moment to install a little Dynamat to help reduce the vibrations from your fancy new speakers! Doors tend to rattle a when it gets extra Bassy. Nice removal video dude!

[@Tacomaholic]

Yessir, that's coming soon as well. Curious to see how it sounds without the sound deadening first though.

[@DirtyJobsGuy1]

Great job!! I really appreciate the time it takes to do these so well!

[@Tacomaholic]

Thanks Michael!

[@kevinpetersen7351]

While you have the door panel off...any suggestions for putting some lights behind the door lock and window buttons? Would like to see those easier at night. Nothing too bright, obviously. Thanks.

[@Tacomaholic]

That would be pretty cool.

[@ryanhunt2619]

Love your channel, anything I need to know about upgrades or how to I find it here,ty sir!!!

[@Tacomaholic]

Thanks for watching!

[@efil4kizum]

Hello! Hello!! ... do you know anything about the crank manual windows on the Gen2 Taco? had to get an aftermarket driver window (2o11 single cab 4wd) after some vandal broke it... now EveryTime it is Hot and the Sun shines on that driver door the cranking mechanism creaks creaks when rolling window down. it Is obnoxiously Annoying! ... it does Not do this when its cooler out and in the shade. maybe it needs some specialty greasing of the tracks inside of there or i just do not know! thanks tacomaholic!

[@Tacomaholic]

Greetings! Ugh that sucks. Sadly I don't have any experience with the manual crank windows. Did you replace with OEM parts?

[@efil4kizum]

@@Tacomaholic no it was aftermarket glass, emergency from glass shop because it was also raining that night/ morning it was broken in the street

[@_wolfbreath_]

this was incredibly helpful, THANK YOU. you saved my neighbors having to hear me growling in frustration : )

[@Tacomaholic]

Ha ha nice! My neighbors have heard just about everything at this point.

[@fitnessfor50something47]

Someone mentioned on a previous comment about using keyboard compressed air on that plastic butyl glue....MONEY!!! turn the can upside down and freeze the glue, presto...the plastic comes right off and you can tuck it up in a bundle up by the handle. when finished with sound materials and speaks-goes right back in place!

[@big_R_]

Awesome video! Are there any updates on the oil leak?

[@Tacomaholic]

Thanks Ray! Yeah I'll do an update vid on that soon.

[@jaymeh29]

the link for the sound deadning is broken how mucg material will i need for a double cab also? 2014

[@Tacomaholic]

Here's an updated link: amzn.to/2G8ddW4 ... and the 10 sq ft should be plenty for just the doors.

[@midship909]

awesome video!

[@bamadave11]

I see you painted your tie downs at the front end of the bed. What did you use to paint those?

[@Tacomaholic]

Just some Rustoleum rattle can. Here's a link to that specific color though: amzn.to/2NsYQ00

[@edgarmoreno3748]

Oh yeah!!! The Taco is getting some BOOM😀

[@Tacomaholic]

Lol nothing crazy but should be a HUGE upgrade of the crappy stock speakers.

[@edgarmoreno3748]

Now to upgrade the deck with Apple CarPlay or Android Auto 👍🏼

[@FLAKKFLAKK]

Thank you that was helpful

[@cowboy19750]

I have manual windows and they are a pain to take off and even more of a pain to put back on

[@Breakr005]

I may be jumping the gun, but do you know if I'd be able to just swap the stock speakers with 6.5" Kicker CS speakers? No amp or anything else added. Would that be an improvement?

[@Tacomaholic]

I'll be doing that in my next vid but with Rockford Fosgate speakers. I did a quick test with only swapping one of my rear door 6.5" speakers and was amazed at the difference. Can't wait to hear the entire thing. Stay tuned.

[@noneofyourbusiness8251]

Very informative! Thank you Semper Fi

[@VindicatorFFXI]

Just what I needed.

[@Tacomaholic]

For some reason the driver's side front door harness for the window/lock buttons was a PITA for me to remove. Hopefully yours won't be as bad.

[@andrewlee8082]

Hey just put some sound deadener looking at your tutorial! But I broke the plastic door fasteners underneath the side view mirrors. You wouldn’t happen to know the part number would you?

[@Tacomaholic]

Hey buddy! These white ones? amzn.to/3eKeDSs

[@andrewlee8082]

Tacomaholic those too lol. But the grey circle shaped ones where you push the middle for the fastener to pop out. I broke two of them getting it out.

[@monse839]

@@andrewlee8082 did u end up finding the tabs? I broke mine in the process too

[@andrewlee8082]

@@monse839 part number is A0016-B2

[@monse839]

@@andrewlee8082 thank you!

[@mmunoz5875]

Is that a Mountain Hatch Tailgate or some other brand?

[@Tacomaholic]

Mobtown Offroad, love it. Here's the vid I did for it: kzbin.info/www/bejne/foiQXnSGmNOYq7M

[@Bullets4TheDevil]

Remove the 3 white clips from the rear door for that trim piece before you re-install it. THEY WILL get pushed in and YOU WILL lose them. Put them on the trim piece (not the door) and then re-install.

[@codygreene9067]

That is one busy looking truck. Good lord.

[@kingavegarage8722]

Did you find Molley panels to replace your rear door panels?

[@Tacomaholic]

No I was removing my door panels to do a speaker upgrade and add sound deadening material.

[@kingavegarage8722]

@@Tacomaholic 😁

[@blackackcl]

Consider scribing? lol love your videos man

[@Tacomaholic]

Thanks man!

[@HFVidShotz]

Nice panel removal. Couldn't have done better myself. Well maybe. Nah! You did 👍

[@Tacomaholic]

Thanks man!

[@ajthekid1256]

i have an 09 tacoma double cab and i’ve had a problem with the rear door. i have to manually unlock it and lock it. it gets annoying after a while specially when you’re carrying gear. if anyone has had this or knows how to fix lmk! thx. and very informing video!

[@Tacomaholic]

Thanks for watching! So the door does nothing when you click the lock/unlock button on your key?

[@ajthekid1256]

@@Tacomaholic yup, it does nothing. the 3 other doors work perfectly fine.

[@Tacomaholic]

Well at least you know it's not your key fob then. Check all the wires running from the lock in the door to make sure they aren't damaged. After that the relays that the wires are running to.

[@ajthekid1256]

@@Tacomaholic okay, thank you so much for the help and information!

[@jonathanmarklin4475]

You should've had a female model do it for you like in tacotunes videos! Lol that's where I learned how originally. Still great video btw. Also I lost all 3 clips on the driver front when removing the lil triangular piece by the mirror. 🤬 Kuntrykid

[@Tacomaholic]

Lol I should have. Here's a link for those clips: amzn.to/2H9pXJN Thinking about grabbing some myself since they are so easy to lose.