Corepads Skatez for Logitech G Pro Wireless Superlight @ kzbin.info/www/bejne/fWO5ZX6tnNSGm9U
@RobertSusin3 жыл бұрын
Thx for the content, but still the easiest method is companies learning to stop putting screws under the mouse feets :)
@Beardedbob3 жыл бұрын
We can only hope they are listening
@CauseImFlawless3 жыл бұрын
why not?
@WeloveohgreatSam2 жыл бұрын
Where else would they put them?
@RobertSusin2 жыл бұрын
@@WeloveohgreatSam Just on the sides, is not that hard, there is actually some mices/company that have already done that, I just don't remember the name to tell you rn.
@rJozo2 жыл бұрын
@@RobertSusin or just no screws lol
@thunderus56783 жыл бұрын
WHAT THE FRICK I WAS LOOKING FOR THIS YESTERDAY BUT RUINED MINE :(
@Beardedbob3 жыл бұрын
Ouch.... What happened? Sorry I couldn't help 😔
@muhammadilyasj6093 жыл бұрын
Same :(
@Davy153 жыл бұрын
This was a great video of cat and mouse lol
@moonmessiah93683 жыл бұрын
Heat is definitely viable but only for those who have used it before. the key is to make sure you NEVER stop moving and to stay back with the element. and some tape on the sensor never hurts
@Beardedbob3 жыл бұрын
Good tip with the tape 👍
@thumbwarriordx2 жыл бұрын
3D printer hotplate is the best way. Set it between 60 and 75 degrees (some ABS can start to soften at 80) leave it a few minutes and the feet come off without getting horribly bent. but the best method is to just have replacements.
@Matthew-gg2hc11 ай бұрын
I used a heat gun and melted my gpx
@NameyNames Жыл бұрын
Many thanks for this! Hair dryer + spudger worked like a charm (on a Mionix Naos Pro), and even though there are some marks and very slight unevenness on the feet after reinstalling them, they still work perfectly fine!
@toastymctoastinson7 ай бұрын
took my tiger ice skates off today to do some modding and man they were completely flat and felt like they were untouched, i used a hairdryer to heat it up abit then added drops of rubbing alcohol all around the skates then went in with a small plastic toothpick (these work FAR better than anything else, they’re super thin flexible and isn’t sharp so it’s a lot better than even a prying tool) and added some more alcohol white taking it off
@leviortiz8329 Жыл бұрын
I'm new to this and I just took off my mouse feet cuz I thought they are meant to be thrown. :(
@Kaiser1873 жыл бұрын
I just absolutely destroyed my g600 feet taking them off. Had to remove the weights inside because it was way too heavy.
@Beardedbob2 жыл бұрын
Yep most get messed up, my recommendation is to replace them each time you remove them.
@Kaiser1872 жыл бұрын
@@Beardedbob I ordered 2 pairs.
@Hazardteam3 жыл бұрын
*01:35* I *love* these little animals soo much!💖🤗💖
@Beardedbob3 жыл бұрын
Meow Meow... 😻😻
@Hazardteam3 жыл бұрын
@@Beardedbob *07:02* Can you tell me the exact name of that 3M tape please?
@wlord18682 жыл бұрын
My shit fell off and now the glue is stuck on it and i cant get it off
@donaldstephens23392 жыл бұрын
Thanks for your video. I just used my fingernail to take them off. Worked fine and mouse is now free range.
@Beardedbob2 жыл бұрын
Fair enough
@krokodoc85063 жыл бұрын
Impressed how good lighter fluid works. Removed the same feet 4 times now, still Look new.
@Beardedbob3 жыл бұрын
Yeah it pretty good. it can make plastic brittle but i've not had any issues... just don't pour it on.
@SianaGearz Жыл бұрын
Maximum temperature before pain sets in after you touch something for longer than 10 seconds is about 55°C, it depends on conditions by a few degrees but there is little individual variability. Before you get to 80°C, there is no need to worry about the materials involved. I should probably just throw the mouse on the heatbed of the 3D printer to loosen the skate glue. I do this when repairing phones and tablets as well to remove the glass. Far as tools go i also have those reddish orangish plastic razorblades, those are nice, they're made from PA just like the spudger and they're maybe a little flatter and a lot wider, which is super helpful.
@FixationwithCarnage7 ай бұрын
I accidentally melted mine a lil bit but I was using a heat gun from a rework station…lol literally made the part I was applying heat to gooey
@JustCreateYou2 жыл бұрын
Will using the blow dryer cause those ugly marks on the plastic and how far or close would you recommend
@ColeRusselPB2 жыл бұрын
This blow dryer worked like a charm on my superlight with core pads
@maxiu.. Жыл бұрын
I think the key here is buying quality pads in the first place, I bought corepads for G604 and removed them multiple times since to replace faulty switches, they come off perfectly every time. A bit of heat and careful prying using a non sharp tool will help.
@seanaklein3 жыл бұрын
For Logitech mice I just don’t remove skates unless I know I have replacements which is annoying for modding but none of the methods have consistently worked for me on their skates
@Beardedbob3 жыл бұрын
Logitech ones you will damage period. They spilt mostly... best to as you say have some replacements.
@Beardedbob3 жыл бұрын
PCB limitations I guess. Razer did do this on the RVM but now on the DAM lol..
@gardenofnightmare Жыл бұрын
Learned this the hard way lol... I ordered new skates today!
@haippics2 жыл бұрын
I'd be careful not to heat the sensor lens. Maybe cover it with a tape or something, (not touching the lens) Have not read any specs on operating ranges for mouse sensors but still. Comparing to most common eye glasses that are made of a plastic of some kind.
@Beardedbob2 жыл бұрын
Why I recommend not using a hairdryer 👍…tbh even when I have it’s never been a problem, just don’t try to heat the base as hot as the ☀️
@DeusKite Жыл бұрын
i cover the sonsor hole with my thumb and heat my thumb up aswell. i am fairly heat resistent, so its not something i recommend, but its the safest way to tell when its too hot.
@rol940811 ай бұрын
I always come back to your vids when I'm doing work on my mice. Thanks Bob, it's the difference between me being able to change switches/mod and not.
@zeuvy99953 жыл бұрын
Mice god at it again! KEEP IT UP! YOUR A GENIUS. 😄😄🔥
@Beardedbob3 жыл бұрын
Thanks ☺️🤗
@pyxern3 жыл бұрын
I messed up and ruined the adhesive on the tiger ice skate that goes on the front of the mouse. What's that 3m double sided tape called that you show in the vid? I can't find anything that will stick to the skate..
@Beardedbob3 жыл бұрын
shop.beardedbob.com/collections/tools
@intelcorei03643 жыл бұрын
Thanks trying to remove my mouse skates on friday
@Beardedbob3 жыл бұрын
Np hope it helps
@wira8097 Жыл бұрын
Hey bob, does using lighter fluid dissolve the adhesive? What do you use when skates have bad adhesive/dissolved adhesive? I'm guessing some sort of thin double sided tape
@Healp1452 жыл бұрын
i just got my tiger ices and put them on but they were a little bit outside of the divots and I decided to peel them off with my hands, didn’t bend it but it did come off a little curved. And they lie flat now, any issues I would potentially experience in the future?
@agsechogd64062 жыл бұрын
nah
@blackpillbackshots8489 Жыл бұрын
So did you use double sided tape to reapply them and they aren’t curved anymore?
@Healp145 Жыл бұрын
@@blackpillbackshots8489 no i didn’t touch them afterward, the feet feel fine now
@kyte81313 жыл бұрын
I only clicked on it cuz I use the deathadder essential as my daily driver.. would like to see some mods for this mouse.. not anything extreme.. mostly just been having grip issues.. I play a lot of fps games and with the ergo shape of it.. the right side is a bit hart to grip when you try to pick up the mouse after a flick.. could you make a video about rubber pads or other mods i can do to make the mouse more grippier??
@Beardedbob3 жыл бұрын
No problem, I've been slacking on the Razer and will be ramping it up this next few weeks.
@casedistorted Жыл бұрын
Ngl I had that term daily driver lol I used to use a Deathadder until Razer wouldn’t honor their warranty when one broke
@LisaL.2 жыл бұрын
just buy a use a pair of small sharp scissors to punch tiny holes in the skates to loosen the screws, saves you the trouble of keep buying new skates every time you need to open the mouse to fix the switches. Actually is the small plastic rectangular tabs on the mouse button towers that you need to smooth out, it only lasts for about 25k clicks (800x less than they try to advertise). I don't understand why mouse companies like to boasting about the 20M clicks the switch can do, if they are serious about it, they really should use metal tabs instead of plastic.
@TheBumblingMum2 жыл бұрын
What is a "splinger"?
@b4n4n03 жыл бұрын
I’m a fan of your content but please, stop with the background songs, they really ruin your videos and are totally unnecessary. Your voice is good, please stop with the songs...
@Beardedbob3 жыл бұрын
Thanks for the feedback and I understand. I've dropped a poll in the community tab so put your vote in and let's see what happens.
@b4n4n03 жыл бұрын
@@Beardedbob Thank you very much for being open to even try, your content is one of the things I look forward the most in regards of mice and your tips, tricks and experience has helped me a lot. I am currently having wrist aches and it is because I have big hands, the G203 is just too small for me. Anyway, looking forward to my EC1, to hopefully have it wireless some day and of course, to your next awesome video.
@7yxc2 жыл бұрын
my mouse broke and i got a new one and i somehow need to transfer my ceramic skates and griptape over ;-;
@PixelGod2403 жыл бұрын
By far the John Smithens method aka zippo fluid is the best!!!! ;) ;). Hope life is treating u well my friend!
@Beardedbob3 жыл бұрын
Sure is... Not bad you
@emma6648 Жыл бұрын
I used a screwdriver on my g pro x, ended up leaving a little scratch on the actual mouse shell under the front mouse foot right where the little slit is, the black adhesive was really on there and was hard to get off since I’ve had the same feet for a year. I also ended up really scratching the puck since the sticky part didnt come off like the actual ptfe foot, do scratches ruin new mouse feet application like do little nicks like mess with new feet? I don’t think they would considering there is giant hole screws under them
@ihatemylife44593 жыл бұрын
The real question is why does he have 3 death adder essential
@Beardedbob3 жыл бұрын
I have more 😂
@erikdg4 ай бұрын
Thx for this. I used your video to open my Mionix mouse to replace the cable. The hairdryer method worked really well and i was able to re-use the mousefeet!\
@Beardedbob4 ай бұрын
awesome glad this helped and you now have new feets
@OcArrow3 жыл бұрын
Hey, just wondering when heating up the skates should you have your thumb covering the sensor?
@Beardedbob3 жыл бұрын
I've never done that but I avoid putting direct heat onto the sensor. if you can it wont do it any harm.
@OcArrow3 жыл бұрын
@@Beardedbob ok thanks!
@OcArrow3 жыл бұрын
@@Beardedbob also Have you seen anyone mod any Bloody Gaming mice? People can drag click 100+ on them.
@Beardedbob3 жыл бұрын
not yet now.... 100+ cps eh... mmmmm which one I might take a look
@OcArrow3 жыл бұрын
@@Beardedbob The bloody a70 or a60 or abedless
@vinceazuela2936 Жыл бұрын
what kind of tape u use?
@ranrinnrin2 жыл бұрын
I just broke 2 mouse because the heat damage the sensor when I removed the mouse feet. So bad
@Dwef-10 ай бұрын
please help me how can i find the slimest double sided tapeand a link for ot or a name
@plompboy7 ай бұрын
Good content on the channel! Nice HQ camera, good explainations and time stamps. Man you deserve way more subscribers.
@casedistorted Жыл бұрын
I thought that blow dryer said babyfist on it for a sec
@datweebjerry33732 жыл бұрын
i dont have a splinger is there anything else I can use just as well?
@juvie006 ай бұрын
hahahah the cat focus :D
@v22z2 жыл бұрын
hello brother if i removed the sticker that says mouse name at the back of the mouse will it affect the mouse?
@biscocaps5 ай бұрын
cat soooo cute
@anonymousperson28163 жыл бұрын
sorry i couldnt quite catch what the name of the black plastic spatula/knife thing haha what is it called haha
I just bought myself a mechanical keyboard and the right side rubber feet seem to either be the wrong height or not stuck properly cause the keyboard keeps sliding. Can anyone let me know if there is a way to fix this
@Beardedbob3 жыл бұрын
Could change or remove the feet? could RMA
@W00DSHAP3R3 жыл бұрын
I love she
@Beardedbob3 жыл бұрын
👍
@hunzhurte2 жыл бұрын
super helpful video!
@PouyanP13 жыл бұрын
It was very good, but what should I do if it breaks down? Where should I buy it?
@Beardedbob3 жыл бұрын
how do you mean breaks down? as in the skates break? If so I would by some new ones for your mouse. shop.beardedbob.com/collections/mouse-skatez-1
@octaryanmarthiyas21513 жыл бұрын
just wanna know,what swith best for replace deathadderr essential switchs, TTC gold or kailh gm 4.0 thanks
@Beardedbob3 жыл бұрын
Have you seen these switch comparison videos? Huano - kzbin.info/www/bejne/q32ao6t5gt59rck Kailh - kzbin.info/www/bejne/mGKsqZmPZahooJo
@sm_tf78043 жыл бұрын
will u be testing the glide speed of xtfy, odin infinity, aqua control + (non coated) mousepads?
@Beardedbob3 жыл бұрын
At some point I want to test them all. I just need the time to catch up :-p
@palmtideАй бұрын
Very useful tips.
@BeardedbobАй бұрын
No problems hopefully will save you destroying your mouse when removing them
@de_generate52243 жыл бұрын
Hey Bob, can you do an xm1r weight reduction and a hati-s one just for the helluvit hahaha
@Beardedbob3 жыл бұрын
xm1 has been done but I need to edit it. I did stream it on www.twitch.tv/beardedbob....
@crybaby-nt5xz3 жыл бұрын
but if i just want to change the skates it doesnot really matter as long as i dont damage the mouse itself, right? i usually cahnge my mousefeet every couple months and just throw away the old ones nice video btw
@Beardedbob3 жыл бұрын
Correct, you will just need replacement skates
@datthanh8193 жыл бұрын
Hi Sir! what trick to remove gpro x superlight feet without damage? Use heat?... Use liquid zippo? Please tell me, i need your rep!
@Beardedbob3 жыл бұрын
zippo
@datthanh8193 жыл бұрын
@@Beardedbob zippo? Sir, i think Zippo liquid will destroy the adhesive layer. why zippo sir?!
@muffy19533 жыл бұрын
very useful thank you !! i mean all ur vids are useful
@Beardedbob3 жыл бұрын
Thank's Muffy I appreciated the support
@muffy19533 жыл бұрын
🙂👍
@muffy19533 жыл бұрын
@@Beardedbob I’m surprised u hearted my comment or even replied 😂
@baconroblox4032 жыл бұрын
me who tore it off....
@ow_lars87803 жыл бұрын
Well i just take an blunt knife and the job is done
@Beardedbob2 жыл бұрын
works as well.
@naufalihsan82662 жыл бұрын
is that thing supposed to be removed from the mouse?
@Beardedbob2 жыл бұрын
The skates/feet? Only if they wear out or you want to open it
@naufalihsan82662 жыл бұрын
@@Beardedbob oh thanks for the information appreciate that
@routine_meme3653 жыл бұрын
Bro my thumb button stuck inside while pressing
@routine_meme3653 жыл бұрын
And it is razer Deatadder essential
@routine_meme3653 жыл бұрын
The thing is I not had equipments like you
@Beardedbob3 жыл бұрын
You should just need a screw driver and a way to take the skates off.. failing that you can always get some new skates. shop.beardedbob.com/collections/mouse-skatez-1 You could also RMA
@wardenpotato3 жыл бұрын
did this guy seriously just say M3 tape
@Beardedbob3 жыл бұрын
Yeah I was thinking of a BMW :-p
@wardenpotato3 жыл бұрын
@@Beardedbob hehe, silly you ;)
@blasko33673 жыл бұрын
amazing vid very helpful very grateful
@Beardedbob3 жыл бұрын
Np Blasko glad I could help 👍
@alexwei37853 жыл бұрын
this came 1 day too late i just burnt the base of my gpx yesterday T_T
@Beardedbob3 жыл бұрын
Ouch.... What happened? Hopefully you didn't melt it. Sorry I couldn't help
@alexwei37853 жыл бұрын
@@Beardedbob ye the entire base began to melt and the switch burnt inwards so u cant move it. Saddest part is that you cant buy a white gpx as its out of stock rn
@Beardedbob3 жыл бұрын
I feel for you man 🙁
@christopherbeltran50203 жыл бұрын
High heat? How long
@alexwei37853 жыл бұрын
@@christopherbeltran5020 only about 15-20 seconds while moving up and down
@Pee_Sadud3 жыл бұрын
So which way is the best 😬
@Beardedbob3 жыл бұрын
says at the end :-)
@Arvinroque3 жыл бұрын
im so confused with the music is it just me
@Beardedbob3 жыл бұрын
What's confusing? On the community tab I posted a poll this week around music so if you haven't voted ensure you do :-)
@Arvinroque3 жыл бұрын
@@Beardedbob at 2:37 and 2:52 theres like another track going on top of the main one idk
@Beardedbob3 жыл бұрын
could be a mixing issue, will take a look ta.
@nuclearatix99992 жыл бұрын
can i have 1 mice ;-;
@Beardedbob2 жыл бұрын
Sorry they were all melted in this
@bahaaghemrawi79893 жыл бұрын
its unremovable
@Beardedbob3 жыл бұрын
Skatez? no they come out.. you just need to decide how
@warb. Жыл бұрын
Bro my skates now feels so bad 🫠 after put back
@blackpillbackshots8489 Жыл бұрын
link to the 3m tape? does it change the feeling of the mouse can you feel the tape?