HOW TO REMOVE PAINT FROM WINDOWS | WINDOW LAB

[@iangeorge8288]

2 year's ago a company asked , is there anybody who can clean window's, I said I'll look into to it. That's when I found your KZbin clips, they gave me 2 squeegee with 2 year old rubber on them. I practice at home following your tuition. And now I have all my own gear including WFP system. I can't thank you enough Steve, Cheers Mate from Australia.

[@SteveOthewindowcleaner]

Thank you, I appreciate the kind words

[@ObjectiveObserver2O]

One suggestion. You CAN scrape anglewise. That will make it much easier to clean and lower cutting angle!

[@dutchshinewindows484]

Is the sorbo blade you mentioned, less likely to drag fabrication debris across the glass?

[@joy_and_hope_for_USA_vote_blue]

great teacher, thanks!

[@Stridonjerome]

Hey Steve I love the new series I just started window cleaning and I’m using your squeegee setup and I quit like it! Now I have a question maybe you can make a (new)video So when I cut in and take the top off when I come to the (right top) edge I sometimes can see the transition where i pulled down.. maybe my angle is off before hitting the corner ? Edit: Also when using an 18inch I tend to leave quit a bit solution 3-4 inches from the edge

[@baskoster]

Same here..

[@bLendDub]

Hi SteveO love all your videos! I know you mentioned this previously but I cannot find in which video; where do you say you got your cool new hoodies that you are wearing in this video? Keep it up appreciate all you do I've learned so much!

[@SteveOthewindowcleaner]

I get them from Finprint www.fin-print.com/

[@warrenshuttleworth8427]

What would you charge for a holiday painted window on a storefront I already got appointments for after the first of the year

[@SteveOthewindowcleaner]

$150/hr or $35 for every window

[@julbe4677]

what's the best window cleaning detergent there is?

[@michaeldube6072]

What about tinted glass or low e glass or other coated windows of that kind? Thanks heaps for your helpful videos!! 😊

[@raindropcleaners]

kzbin.info/www/bejne/bnPOfJeNZ71-gq8

[@SteveOthewindowcleaner]

If its after market tint on the side of the window you are removing it from then no luck, but if its a factory tint between the panes then its fine. Low E is typically fine as well, due to Low E is usually between the window panes

[@dutchshinewindows484]

One of the concerns I would have is whether the low E coating side is exposed. As Steve mentions, when they assemble and bring the panes together, they are supposed to ensure that the coating is in the middle between the panes. However, sometimes they'll assemble them backwards, leaving one low E coated side, exposed. In that situation, 0000 steel wool or even an abrasive pad will start to remove the coating which will look like scratches to the home owner

[@DJJs635]

Hi Steve, how do you price for residential? I’m going to just price per window but not sure of price for in and outs

[@SteveOthewindowcleaner]

kzbin.info/www/bejne/oZaoYWarjbiMl6s heres a video I did on residential, it was a couple years ago so I've raised prices since

[@AbsoluteNewsNetwork]

Do you only clean the windows from the outside or also from the inside ?

[@SteveOthewindowcleaner]

Inside and out for best results

[@AbsoluteNewsNetwork]

@@SteveOthewindowcleaner Thanks for the quick response !

[@craigalanwilson]

Very good man!

[@ObjectiveObserver2O]

Basic physics!!!👍

[@josephgimmics7314]

Awesome man!

[@Grinfas]

Steveooooo!!!!!!🤙🏻💯🔥🔥

[@mannylopez15986]

Ok, what about removing paint from the metal frame?

[@georgea6403]

Why are people saying never blade tempered glass?

[@grizzlytasbear9716]

I gotta do this tomorrow jeez im nervous and its an old window and fat blob of it

[@SteveOthewindowcleaner]

You got this!

[@derekcraig3617]

A paper towel and lacquer thinner first on the glass makes paint removal 4x faster...

[@eduardoreyes8751]

That’s won’t scratch the glass ??

[@SteveOthewindowcleaner]

Nope, but always be careful with fabrication debris

[@dvgains2740]

How much would you charge for this window with that much paint on it?

[@SteveOthewindowcleaner]

$10, typically charge $5 a side so doubling the price. Paint doesn’t take too much, and usually it’s not this much paint. Adhesive and silicone takes the longest

[@1298matrix]

0😮🎉 1:02 o🎉o

[@orlandosoto6080]

My windows look like they were blasted with sand there’s no longer paint on them to scrape all I have is an edging on them so I guess I need to replace them🤷‍♂️

[@mathiastoft5496]

What do i do if my squeegee doesnt glide very well? Ive tried searching for an answer, But havent found anything

[@SteveOthewindowcleaner]

Could be the squeegee rubber needs to be replaced, also having a quality squeegee helps like this one windowcleaner.com/products/ettore-complete-brass-ledge-eze-squeegee?sca_ref=3020242.k17l3JaEgS

[@gkkarthic1978]

Oh yes, how do we remove paint from a $20 window? Buy a $200 product for it. I mean I'd rather replace the damn thing

[@SteveOthewindowcleaner]

A scraper is $20.