How To Remove Pins / Wires From A Delphi Style Connector With A Hair Clip. GM LS Alternator LS1

[@WiringRescue]

Thank You for Watching the Wiring Video! Subscribe To This KZbin Channel: ​kzbin.info​ See My Wiring Playlist: ​kzbin.info/aero/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

[@danpettis1675]

just saved me$$$ . was about to buy an pin tool kit , which i would probably just use once, then forever sit in my toolbox thank you for posting this

[@Dario-h8g]

the cutup section was very Creative !!!!and Instructional!! thanks for sharing!!

[@WiringRescue]

Glad you liked it. Thanks for watching!

[@marksgriffith]

Thanks - just what I was looking for short and to the point

[@WiringRescue]

Thanks for watching!

[@squidusn71]

Thank you. I needed to shorten my alt wire about 18in without using a splice. I'll just have to buy the correct connectors since I have more to do.

[@WiringRescue]

A splice can be totally fine if done right. Even factory car wiring uses crimped splices. Thanks for watching!

[@magicalmilitia7838]

Safety wire worked perfect here

[@omarh4694]

Excellent vid

[@gregoryrikard9308]

Thanks for the tip. Where can I find the metal connectors and the seals I need to make up replacement wires for a Delphi neutral Safety Switch Connector due to rat damage chewed off behind the seals and a crimping tool or where can I find a pre assembled wire set? Standard S1516 is a generic replacement with only 6 wires and the one I am working on Uses 11. Any help Will be appreciated thanks

[@godfamilycountry4211]

Sweet tip. Thx for sharing.

[@WiringRescue]

And Thank YOU for watching the video! I appreciate it!

[@AntonioClaudioMichael]

Good tip bro

[@WiringRescue]

Thanks! Hopefully it helps somebody out.

[@ze_german2921]

Just what I needed to know!

[@WiringRescue]

Excellent! I hope it worked for you!

[@MUHAMMADKHAN-pe7ez]

pinning is not problem. de-pinning is always problem. would you like to make a video de-pinning the different types of connectors used in the cars??

[@pinkneyfoster1286]

Thanks very much.

[@WiringRescue]

Thank you for watching! I appreciate it!

[@AntonioClaudioMichael]

Gm connectors can be a pain to de pin

[@isorozco511]

Unfortunately I can’t do this because i dont have a wife!

[@lucysmith4242]

I can't for the life of me re pin the connector

[@lucysmith4242]

I used small pliers and pushed on the little weather seal part