How To Remove Replace Spark Plugs 2007 Mazda 6

Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ib/NGETK00058
In the video, 1A Auto shows how to replace old or fouled spark plug. The video is applicable to the 07 Mazda 6.
This process should be similar on the following vehicles:
2003 Mazda 6
2004 Mazda 6
2005 Mazda 6
2006 Mazda 6
2007 Mazda 6
2008 Mazda 6
🔧 List of tools used:
• 5/16 Inch Spark Plug Socket
• Ratchet 1aau.to/otp/1AXAA00016
• Socket Extensions 1aau.to/orY/1AXAA00015
Subscribe: / @1aauto
Check out our playlist:
Mazda 6 2002-2007 1st gen GG1: • Mazda 6 2002-2007 1st ...
For More Info visit us at 1aau.to/h/DV/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@victorhoyt4352]

I wish I could have you on retainer lol. Your videos are so professional and extremely thorough. I love how you explain what to look for and if something comes up during the job, you clearly explain what to do next. This video for example, the spark plug had oil on it, so you explained how the valve cover gasket needs to be replaced, then you made a separate video on how to do it. You show and explain everything in great detail, and you have not only taught me to fix my own vehicle, but you have also saved me thousands of dollars over the last few years!!

[@dyl100]

Thank you for this helpful video. One IMPORTANT remark. Before you start to unscrew the plugs ALWAYS clean the the area around - vacuum clean or/and pressure air.

[@bearscubs6994]

Just saved me 125 dollars in labor Thank You! Took me 45 minutes of my time so glad these videos exist

[@MrPsychguy1]

Well done! Thank You...

[@tannerhackney1447]

I love you videos! Can you guys make a video on how you change the spark plugs on 3.0L engine?

[@emrek1]

Yesterday it was raining hard and I guess some of the spark plugs got wet. I was planning to dry and clean them. If it works I can't explain how grateful I would be for this demonstration :). I have 2009 mazda 6 2.0. I think the engine design is similar. Thanks a lot anyway. (subscribed)

[@1AAuto]

+emre önal Thanks for checking us out. 1aauto.com

[@TheEnvelopeOZ]

Thank you cousin Su.

[@niianku7738]

It looks easy that I thought

[@peters7278]

I bought platinum NGK LTR5GP for the same 2007 Mazda 6 2.3L engine, and they are 0.040" out of the box, so do I need to gap them to .052"? I'm wondering whether the different metals (iridium vs platinum) affect the gap.

[@GuitarGuy650]

Gap is standard for manufacture recommended plug. Need to make sure it's properly gapped else you might get misfires

[@dw9555]

I'm in the process of doing this on 08 mazda 6 w/ 4-2.3. Hoping it was not a terrible ideal to pull all old plugs out at same time. I did start on left cylinder #1, and worked my way to right. Only asking if makes a difference since she did one at a time. Any advice would be greatly appreciated 👍, ty!

[@1AAuto]

+D W Thanks for watching. You can replace the spark plugs in any order you want, as long as you put the coils back in the cylinder you took them out of!

[@dw9555]

@@1AAuto And I thank you folks for awesome videos / content, in addition to the quick respond!! Ok, sounds good, tya and keep up the great work👍!

[@whattheworldsneedswhatneed774]

Where do I buy that thing u r using to check the gap on the sparkplug?

[@kotacolestock]

Mom accidently left the oil fill cap off and drove and now it has a miss fire. The engine bay was cover in oil im thinking the plugs just got oil on them causing the miss fire. Should I just take it apart and clean them?

[@stancetv2005]

But did anyone else notice the belt missing?

[@shadec7138]

Pulled out my boot and there’s oil on the boot and obviously on the old spark plug. Do I still change them?

[@XxTrustNoOnexX]

thanks

[@1AAuto]

Thanks for checking us out. 1aauto.com +Tom552

[@talonworrell2931]

Are some already pre gapped?

[@1AAuto]

+talon worrell Some spark plugs do come pre-gapped.

[@sendit1158]

Sue your great

[@1AAuto]

+80s Honda dirtbike 1 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@lionelhughes]

To replace valve cover gasket

[@1AAuto]

+Lionel Hughes We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@manofgodkevin714]

What about Mazda 3 spark plugs

[@1AAuto]

+Kevin Nep We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@jeremiahhall2281]

Thank u Ms. Sexy Sue!!!!

[@747RAWR]

Sigh, non of the cars anyone uses for these demos, are 6 cylinder, or have the big plume my car has

[@giedriusk.4321]

"i guarantee it's not original equipment". i guarantee it is original spark plug. it's the same NKG spark plug, but it's marked as FoMoCo (Ford Motor Company). in those years Mazda cooperated with Ford and Volvo, so FoMoCo spark plugs were placed in Mazda engines as original parts.

[@GuitarGuy650]

Someone woke up on the cranky side of bed...

[@felipeolivares6277]

What a 🤣 joke.