How to remove speed limiter Chinese Electric Bicycle - Ancheer

Link to the $599 Ancheer - amzn.to/2CNdtaq (last price check 03/30/2020)
Link to the NEW $749 MODEL (500 watt) Ancheer - amzn.to/2x8OfBY
this one has Double battery Double motor
Other modes made by other brands and prices links below
Link to Kemanner $599 - amzn.to/2wIVMnK
Link to Merax $599 - amzn.to/2Py7uZc
Link to Unbrand $629 - amzn.to/2oG40sg

[@chrisduke3251]

That bike sounds like it's blending Margarita's when it gets going.

[@willw125]

Lmaooooo!! This made my day

[@RheaRae]

Good info. Thank you.

[@1MoreFish]

Hillarious!

[@niall441]

It sounds like a power Rake.

[@nathanzaworski2780]

Then burn out your motors?

[@dublinvids5146]

I cut the wrong wire and the speed went crazy. Hiit 88 in no time and found myself back in good old 1955!

[@lodaman5614]

Lmao

[@PlamsMiller]

🤣🤣😭🤦🏽‍♂️

[@amnobody117]

That's heavy!

[@Glo-Blades]

This worked for me. I purchased a replacement controller directly from Ancheer and it slowed my bike down. I think the original one must have already been unrestricted, but the replacement was not. I've read that for other controllers (not Ancheer) simply look for the one wire that originates from the controller, and returns to the controller (a loop), regardless of color. Thanks for the tip!

[@kodfish101]

Would the wire be plugged into anything?

[@Glo-Blades]

@@kodfish101 The wire I was referencing is a loop. It starts in the controller and goes right back to the controller. I think the one on the ancheer controller is white. If it’s a continuous piece of wire just cut it in two- or it may have an inline plug and you can simply unplug it. I did that, and I added a 48 V battery, replacing the 36 V, and this bike flies like a rocket now!

[@shadowdance4666]

Looks like defusing a bomb

[@protechnician83]

bombs are the red wires

[@technocrat7971]

This does not fully remove the speed limiter. To get max ( 3rd ) speed you need to open up the speed controller. Then follow the 2 white wires to the circuit board. On the board there should be one wire going to a ground and one to K1 ( or speed 1 or low ) its printed on the board. ( k1 is low speed, k2 is high speed, there is no connection for speed 2/mid ) Now next to K1 you should see K2. You need to connect a wire from the empty K2 connection pad to the white ground wire. This will enable the 3rd & max speed. Almost all brushless speed controllers have 3 speeds but on some Chinese controllers they leave out the jumper wire to enable the highest speed. On speed controllers with the speed limiter white wires the options is speed 1 & speed 2 the controller does have the 3rd max speed but you have to solder the wire on to enable it.

[@freedomisamust4754]

Do you have a pic of the controller ?

[@autoscoot5964]

Well, how fast will the bike go about if you do only the thing in this video?

[@-iIIiiiiiIiiiiIIIiiIi-]

Found the guy who should do a video on this topic.

[@mehmetcanaksoy8217]

Guys this is a biycle not a motorcycle 45km/h isn't enough for you? :D

[@KylesYTU]

@@-iIIiiiiiIiiiiIIIiiIi- send link

[@salvagemagician1644]

I believe those white wires are the ‘road legal’ switch . So for example I have a 1000W motor and with my wires connected (blue in my case, brand voilamart) then it restricts the bike to 250W (wattage limit to be road legal in the U.K) and then the bike is also limited to around 14Mph. Disconnect those blue (white in your case) just removes the 250W limiter and allows 1000W which does about 34mph . But then there is another means of speed limiter still active as at 34mph the motor will cut out and not accelerate higher than 34mph, if there was no further limiter the motor would keep going until it reached the max rpm capable on the supplied voltage. I’ve tested this and added extra volts and still the motor cuts at 34mph. So I believe it’s still using the motors hall sensors to monitor and limit the top mph the motor will achieve, also I believe it can use variables on the 3 phase power supplied to motor to monitor speed and still limit it . I’m going to try disconnecting the motors hall sensors to see if that makes any difference , if not then I’ll be opening up the control box (the small aluminium unit) and investigating in there to see if there’s any bypass or link or something I can find. But good video 👍🏼

[@fisgust]

Yesn't. There are other countrys, Daniel.

[@plum_pie6402]

I know the motor kits youre talking about. In my experience they top out at 30-35mph. which is perfectly normal for a 1000w motor.

[@plum_pie6402]

@@mtuz8356 most motors can comfortably overvolt by about 25% and ive run one at 50% for a while with no issues

[@bussterX]

Husaberg R o

[@angelffalcon3134]

@@mtuz8356 theyre designed to go that fast, this limiter is for speed laws. i china they dont need the limiter.

[@ucellonero4347]

stupid regulations.... with human strength in normal bikes you could go as fast as 40 km/hr and yet human speed is allowed while engine speed is limited!!!!!!!!!!!!!!!!

[@TheCrazyRomanian]

True

[@ThePeanutization]

That's brown wire for my e-bike. From 20k/h to 35k/h.

[@fwefhwe4232]

do you have 250w motor ? hub or middrive ? thanks

[@CANADA-fq9fh]

+John Javs: Can you really go up to 21mph after disconnecting the wire speed limit?!!!!

[@L3doc3000]

Super! worked on my ebike Ancheer. I was super disappointed I couldn't go faster than 20kmh now easily 30kmh Thanks!! How did you find this trick?

[@robchandler2243]

How many miles did u lose power only with this

[@astrallarium]

@@RyzenPlayz07 hmm, I wish we had something that would tell us this kind of information...... google it maybe?

[@HighestRank]

He hijacked a Chinese freighter and forced them to talk.

[@yestn3464]

@@HighestRank I was thinking about that. My respect for this man has gone up!

[@curtwuollet2912]

Warning: Ancheer's warranty means nothing. I have the 500 watt model 26" model. The pedal assist is defective, PAS1 goes 18mph, and they won't fix it. You have been warned.

[@GoodWolfWonRocky]

⚠️ Absolutely correct!! They will NOT honor their warranties and will argue with customers until its past warranties then argue you are to late. A very dishonorable company and you are truly on your own if ypu invest in this company. A total shame on them!! Yes, be warned ⚠️

[@curtwuollet2912]

@@GoodWolfWonRocky I pretty much expected them to balk as they are in China. I wasn't that concerned as I'm retired from industrial electronics, automation and motion control so I could buy low and build from there. But, I was concerned for the folks that really need customer service. I've got the bike working properly and have >2000 miles on it. Discourse with them is a waste of time and effort.

[@quebecredneck666]

I just got a older E Bike . It says 250W - Max 500W 36volt , It does 20 kmh . I will have to try this and see

[@mr_ninj4918]

So tell me what happened with you? cuz mine is the same, should i try ?

[@quebecredneck666]

@@mr_ninj4918 Mine did not change anything . It has something in the hub that controls my speed

[@mr_ninj4918]

@@quebecredneck666 so you unplugged the speed limiter cable and nothing happened ?

[@quebecredneck666]

@@mr_ninj4918 For the bike I have it did not work . ( It could work for you . ) Is yours a store bought bike ? Mine is a Canadian Tire bike and it has to do with electronics in the motor hub . Not the controller . I have seen some on EBay ( HUb motors not locked at any speed )

[@chrisbohlman9734]

I'm in the US as well, and mine was disconnected. Perhaps it is set that way to plug in if the area it is sold has the law and governs the speed, disconnected if not. Thanks for sharing!

[@salvagemagician1644]

Chris Bohlman that’s exactly correct , it is a 250W restrictor because in the cursed U.K that’s the max road legal to still be classed as a bicycle, any higher and the bike would be subject to the same laws and rules as a motorcycle , license, insurance, vehicle registration and tax, a license plate and MOT (official annual safety inspection ) so by unplugging it you remove that restriction . But there are still Max speed limiters in play, the hall sensors , the motor phase readings or sometimes in the lcd (if you have one , I don’t )

[@sugofa7436]

*I CUT ALL THE WHITE WIRE ON MY EBIKE. MY EBIKE IS NOW SUPER FAST*

[@Hoosienburg]

There is one wire that doesn’t go to anything what is it?

[@Glo-Blades]

If it's white and loops back into the controller that's the one... may have a quick disconnect plug- or not. Then, snip.

[@paulc1559]

I love your videos and bought my bike partially based on them..... So when I saw this I was excited. I opened mine up and the white wire was already disconnected. Throttle only my bike maxes out at 14MPH. Lame......

[@steebbrell835]

Same 15 mph

[@kerobop]

Yeah this shit works the same with Ecotric bikes (Same electronic component box), and boosted from 23 mph to almost 30 mph.

[@rpriest9585]

Noah who? Got the Ecotric and I just did this hack. It works fine. Have you had any issues since you’ve been riding this way?

[@JulioRegis]

I got a vivi 350w but my control look different no white cable any ideas

[@kenswireart88]

Ancheer has a 500watt ebike now u should make a review on that.

[@wb4h]

The white wires are the reprogram wires for motor direction, nothing to do with speed control, SCAM VIDEO.

[@beezysbeatz4924]

If you aren't aware, ALL ebikes are Chinese. Unless you forge your own metal alloyed frame and all other metal parts, batteries, motors etc then you have a Chinese made eBike. ASSEMBLED in the USA is not MADE IN THE USA

[@skyepilot3274]

Just did a 48v 20AH w/ 1000W rear hub wal- mart conversion on my 8 yr old Raleigh Atomic aluminum frame bike. The radar on my street clocked me at 26 mph one way and 24 mph the way back. Really happy with this setup. I guess there is no limiter on my controller. Wee.....

[@ianmangham4570]

That's slow, I'm using a 250w geared front hub with a 36v 15ah battery and get 24mph.

[@Tiralful]

@@ianmangham4570 I'm sure it's like crappy car amps, they say like 3,000 watts bit it's really like 200.

[@ianmangham4570]

@@Tiralful Voltage times the AMPS of your controller =WATTS

[@pratta.r.7724]

Sorry to tell you but that setup should do 35 mph no problem just throttle, my boy has same set up and i was shocked

[@brianrosie1762]

All because lady tried an ill fated overtake and got butthurt? She should be in prison,

[@kurtismckemmie4850]

This video helps a lot. I'm very new to the ebike population and I can't figure out how to use the twist throttle on my electric city cruiser. I definitely figured out the pedal Assist. But I have noticed that I'm going slower even at top gear and the battery is fully charged. Any advice?

[@renevanvelsen3809]

Thnx dude, got my Ancheer today....gonna remove the limiter right now....😎

[@MandeepSingh-sk5rb]

Which model you got?

[@jimanonymous113]

I worry about overheating motor.

can you do it to a likebike seeker s it dont have black box thing

[@franswijnands4022]

if you don't pedal it's not a bicycle

[@shantelldigital]

i removed the limiter but now im travel sick . vomiting everywhere !

[@davidrossmiller8349]

Won't work on my 2019😟

[@bruzza3031]

Mine was blue and it did not make it go any faster took it apart for nothing

[@GeorgeusJorgush]

Any advice on newer model like FIIDO D2S??? Appreciated

[@GoodWolfWonRocky]

⚠️ This company will NOT honor their warranties!! Warning !!! ⚠️

[@TheCrazyRomanian]

But it's half the price of other brands so you can get basically 2 one for parts

[@edwardcody4941]

Ok I have a 3 wheel chinese trike bike its electric but not a bicycle will this work. Or its only for electric bicycles

[@quebecredneck666]

It should work

[@davidross7982]

I'm in the U.S. mine is 750 but unplugged 1000w I ride at 15 to 18mph I am in no hurry but my 48v bike can hit 33.2mph. in my case the wire was blue! but I knew of this before the video, good for others that did not have knowledge of this , great video.

[@raymondguzman2162]

USA it’s blue ?

[@koencrank1786]

What bike u got

[@Frederico3067]

it worked on a random eletric bike/scooter. Thanks

[@TheCrazyRomanian]

Awesome

[@pblc5932]

This works on my bike, but the problem is the white wire is not only for the speed sensor, it also tells the controller if the wheel is spinning, so if I disconnect on mine I get more speed but the bike will turn off after 5 minutes because it will think that is not moving.

[@Hkaojn]

My shit is about make motorcycles sounds

[@robertmccallvevo]

On the newer one u dont got a controller so u cant remove it? Or you know where controller is?

[@bellsboi]

I just received mine yesterday and the wiring is totally different from this one.

[@BoomTerra]

Will a 48 V battery work on that 36 V bike

[@icclg5768]

No, you'll ruin the motor.

[@HighestRank]

Yes, it’ll ruin the motor. Still work though, battery won’t be hurt.

[@jamespsyfer]

By making this adjustment… I would assume that you would massively limit the bikes range? I have an auto cruise mode which boosts speed but the battery just dumps after a little while

[@SamuraiBud]

mine is 25 kph i want to unlock it

[@Soibacstr]

It work in EU , i havé 25-26 km/h now

[@-never-gonna-give-you-up-]

Lol my bike is standard 25 kmph

[@MeAppleCat]

It worked. Before 18-19 kmh and after unplugging 24-25 kmh. Thanks Buddy 👍 Abo + Like

[@-never-gonna-give-you-up-]

MeAppleCat wow my e bike goes stock nothing modified 25 kmh 😂

[@Radek-j4y]

@@-never-gonna-give-you-up- In holland it needs to be restricted to 25kmph. But i removed the speed limit and now it goes around 34-35kpmh

[@-never-gonna-give-you-up-]

@@Radek-j4y hahaha ik ben ook nl hoe heb je dat gedaan ik zit al zo lang te kijken hoe ik heb 'n Chinese ebike van cranenbroek ( goedkope meuk hahaha

[@Radek-j4y]

@@-never-gonna-give-you-up- haha, ik heb een trek t500 fiets. Met bionx achterwielmotor. Had op marktplaats bionx ingetypt en zag toen een advertentie over opvoeren. Hij voert in je display in dT de begrenzer eraf is, verder is de ondersteuning ook getuned. Dus je hoeft nog minder te doen en trekt veel sneller op, alleen je accu is sneller leeg. Heb zoiezo al een slechte accu dus laat 'm reviseren. Maar goed ik weet niet hoe 't met jou ebike moet, miss ff opzoeken op internet?

[@-never-gonna-give-you-up-]

@@Radek-j4y gaaf zeg ik zou het niet weten hoe het met die van mij zit zou is 'n keer moeten kijken 👍

[@Mishakol1290]

I have a Ancheer bike that does not have that control box on it and it is not visible at all, how can I still do this mod/hack? This bike also does not have "+" "-" buttons, it just has a "mode" button that changes the speed of the bike. Its just a battery gauge and a power gauge, and one button.

[@law2181]

The white wires that is connected is actually the programming wire. It should be unplugged.

[@benketteridge2404]

Any idea how to remove the Limiter from the scooter (X100)?

[@monkeyhaters9258]

Hey don't be riding that bike by any government buildings😯 That thing sounded like it was going to explode💣💥🤯☠🚲

[@indianideas1]

Sir, plz tell In Hero Lectro bicycle how to increase speed.

[@marty2970]

Worked! for the Ecotric fat tire foldable bike 500w. Same white wire I have two of the same bikes and I raced them after to confirm. If your heavy 200+ won't go to much faster tho but still an improvement

[@raymondguzman2162]

I need help which one would it be I have ecotrics as well

[@raymondguzman2162]

Is it the one going to the motor do I have to cut the wire ?

[@marty2970]

@@raymondguzman2162 check at 1:00 on the video. There is a white wire with a plastic clip in the middle "speed limiter" Just disconnect the clip

[@raymondguzman2162]

@@marty2970 mine doesn’t have that Marty is there a way I can send you a rn any where or a pic of it

[@raymondguzman2162]

@@marty2970 my Facebook is Raymond Guzman

[@papnoel5967]

how to install converter 72volts to 12volts

[@salvagemagician1644]

pap noel if you only need small current load (Amps) then you could use a dc voltage buck converter but . But IMHO and what I chose to do was buy an 18650 cell holder that fits 4 x cells then wired it in series (you can get them pre wired in series in you’re unsure ) then you have a 16.8V power supply with removable 18650 cells that you can use a cheap 18650 charger for and also carry spare sets of 4 cells if needed) doing that I built all my bike 12v system (headlight , taillights, motorcycle horn, indicators , brake light and even some strobe strips for when you need that extra visibility in fog etc. I can send pics if you want an example or possibly even may still have the link for the battery holder I bought pre wired in series. I’m happy to help if you have other questions

[@thomaspowell3739]

It also disables any warranty as it breaches the rules that maintain the warranty. They will know if the bike has being tampered with as it shows up on the codes

[@-never-gonna-give-you-up-]

Yea cuz a diy market kit has warranty

[@thomaspowell3739]

PDB cuz yeah

[@HighestRank]

Bullshit it’s only the programming wire and should have been disconnected at the factory.

[@JoachimPetersson]

Same on e-chopper you think? I have an FreeV evr 1000. Looks like an Harley.

[@brettm7162]

Man I wanted to order the new one and they are unavailable 😟

[@jasontbarnette8214]

Dude I ordered a new orange 350w they sent me an old black 250w and didn't respond to my return complaint

[@Jan-Jansen2024]

What is the speed of this bike, and is this a good bike. I want to buy it

[@HighestRank]

Holy fuck, Batman can you not watch the whole video?

[@indianideas1]

Plz give link of Speedometer

[@YLF-NBF_OnToP]

I didn’t find my controll

[@Funker_Z]

Wau thanks bro, i tested next days... I have this bike!,👍😀 Yoooo this work but i have here other model of Ancheer ebike... And this model of video i tested next days... Thank you👍✌️

[@deadsheep1559]

lol...i have a 3000w 72v motor

[@JohnnysCafe_]

Miles per hour??? The world stopped using miles as a measurement many years ago.

[@astrallarium]

Yeah well the guy who was going to bring kph to America died on his trip back and now they're stuck with mph. True story

[@mozzjones6943]

Did it? Damn. My girlfriend always tells me I'm behind with the times. I'll have to start getting used to KPH... Daunting

[@mikebrown7562]

we still use mph

[@Kicks4low]

I don’t know what Kmph is, I only have heard and been around MPH my entire life and don’t know the distance of a kilometer. He did it for the millions of people in the US you ignorant fuck

[@manFromPeterborough]

@@Kicks4low 1 mi = 1.6km

[@scottsprague9933]

they say in some ads that there is 500 watts this is not true it is only 250

[@allanc7897]

any one try this on a Swagtron EB5 bike?

[@ALECandPIZZA]

Did you ever try it?

[@ALECandPIZZA]

?

[@briannlambert404]

Will this work on Cyclotricity Revolver Hybrid 250w , as i just got one coming next week ,

[@yairshvartz7302]

I unplugged the cable and still the speed has not changed Is there anything else to do?

[@HighestRank]

New battery.

[@ghostbiker7391]

the white wire is for telling the controller to turn the wheel on forward or backward in many bikes maybe there is an exception for chines bikes

[@jackwarwick8057]

Yes, for all the controllers ive seen this is the 'learning cable'. These controllers usually have a 3 pin plug where shorting the different pins gives different speeds

[@achi113]

i have a samebike 20lvdx30 can you help me to unlock limit?

[@nelsoncubias2001]

have you find any solution yet?

[@leonpravst7860]

i hope i find a white wire in my hoverboard

[@EduardRitok]

and what if my controller does not have such "jumper" how can I eliminate the speed limit? I bought 1500W 48V kit and it is set to EU legal values 250W 25kmh ... and I do not see any jumpers or wires I could manipulate...It is very basic controller with no LCD possible to be connected to . Any tips? :(

[@REAL-Scissor]

It didn’t do nothing

[@DecentralEyes]

Just to confirm: is that figure of 18 miles per hour or kilometres per hour ?

[@TheCrazyRomanian]

Miles

[@kasen9487]

Jesus loves you

[@Mefarious]

Anyone know if i can increase speed on frugal Compact? max 32km/h is it possible to reach 40/45?

[@hymlog]

...NOW SHOW HOW TO WIRE AND MOUNT A EXTENDED BATTERY WITH A SWITCH ..THEN YOU GOT SOMETHING...

[@kopazwashere]

Wire up the battery in parallel to connector that other batteries are plugged into, 3D print or go buy a frame to put battery on. Electronics 101 my dude.

[@petervigna3579]

If uber eats finds out you did this they will can you ...not hating just a heads up

[@TheCrazyRomanian]

If Uber eats does what haha what do they have to do with this ...?

[@petervigna3579]

@@TheCrazyRomanian lots of ebike riders work for uber just thought id put it out there plus police can impound your ebike if they catch you(depending on state ect) but i think most people know that.

[@Firemanfrog21]

Thank you. This worked on my eskute voyager

[@1979berty]

Can you help me derestrict mine? How did you do it I have the voyager

[@bigdan8337]

@@1979berty Go to the Eskute KZbin channel, on there look for the video on how to remove the controller, once you have done this you will find a white wire like the one in this video unplug and it's done.

[@1979berty]

@@bigdan8337 thanks man. I'll try it

[@1979berty]

@@bigdan8337 I looked and my controller is not in that position. I have the pro which is mid drive. I'll check below the battery when I get time and look for that elusive white wire.

[@bigdan8337]

@@1979berty oh I see, I know it's possible to speed hack the Bafang mid drive systems but the process may be a little different than the hub variant.

[@stkyfngez]

Sick video!! I was wondering if you happen to know how to unlock the top speed on a kd58c display, so that I can go 28 mph plus on throttle only? I have a 2024 Sole E (24). I have watched every KZbin video related to the kd58c display, and Reddit, and I can’t find anything. Thanks

[@DrDre-sy2kv]

thats 50% increase !!!

[@kasen9487]

God bless God loves you

[@askdad]

Did you check the speed with GPS? because it might just change on speedometer numbers .. also how do you know if this is speed limiter wire? how did you figure it out?

[@shonvander7440]

Might be guess work. When you build your own from a kit , there's usually a single wire that connects to controller from the hub that limits the speed. It would stand to reason if you have a single wire connection in your pre-assembled that could be that.

[@unuAndu]

salut ! am un escoter Rolektro 36v / 500w. Cu 100kg cat am eu merge cam cu 22km/h. Cu fiul meu 36kg tot cu 22km/h.. Nu am acea mufa. Ce pot sa fac?

[@Wutzmename]

Your bike, I have the exact same one, sounds awful. It's clanking and rattling. Sounds like it's coming from the motor. That's not a very good sound.

[@CANADA-fq9fh]

What is the difference between the Ancheer and Cyclamatic apart from the color?

[@HighestRank]

Warranty RMA address.

[@simplyorange000]

big mistake!!! i tried doing that now my gio rogue electric scooter doesn't power on even after reattaching those wires.

[@rxmor-rxarmy3162]

of course, different controller, different company, not to mention its a scooter and not a bike. go to your nearest bike shop and they will fix it. you cant just cut off wires because you some some video on youtube.

[@HighestRank]

Electric scooters and eBike shouldn’t be very different conceptually, but colors aren’t a mandatory part of either concept.

[@RealDiaFr]

These bikes with white cylindrical batteries have been recalled due to catching fire and exploding. I wouldn't buy one, and would send in for a replacement if you own one.

[@paulschmidtke425]

Thanks

[@frostykbudz5466]

I do not believe this works... disconnecting the limiter only allows the screen to then tell you how fast your going it's not actually allowing you to go faster theres no more power being added and I think the only reason in this case you went higher the your 12 is because you were going down a hill I have no idea I'm literally just spit balling here I just bought my first ebike it's pretty dope need it for work

[@rayserx98]

finally someone who shows how to remove the f%!cking limit, this video helps me a lot. tysm!

[@askdad]

It does not work on Jetson bolt pro

[@adslammer1359]

Mines blue

[@waelkmail6133]

Can i add a front electric wheel to my assist rear e bike?

[@TheCrazyRomanian]

absolutely you just need to carry more battery and will add weight

[@hotdude655]

I have a vivi 500w brushless motor. My module is enclosed in 4 screw compartment and there is no white wire at all there, there isn't even one single wire connections only dual wires connections.

[@ttbreezy5063]

I have a himo z16 ebike, not sure where the controller actually is. Not very familiar with the whole ebike thing but i wanna ride it without restriction

[@SingleFosterDad]

I'm not sure but I thought somebody told me the blue wire

[@elmundir]

In the Eu version there is no white wire...there is not even a wire which make a loop like yours ,I found the hall sensor andI disconnected it but the motor wasnt working anymore,dont buy ancheer in eu if you want some speed

[@radurc]

I have 6 wires in the hall connector instead of 5... Can the white wire in the hall connection be the speed limit?

[@elmundir]

No dont cut it or unplug it , if you do it the motor will not work just buy a " KT LCD3" or KTLCD5 and then go on top speed limit and set it to 70km/h you dont need to remove the old control display just connect the kt lcd change the setting and you can then connect again the old , so it will take you 5 min to do it enjoy

[@kennethbratlie]

Bull

[@doomicle]

I found a wire like this in a bike I was looking at, but when I disconnected it, the speed limit was still the same, and instead the speedometer wasn't displaying the speed any more.

[@NFSUCHIHA]

Well i have to check that

[@Rezrider74]

I have the Same bike...out of the box...i got up 18mph...i have had this bike for a year but on my second battery...

[@rossevans2814]

I have ordered the samebike, is it the same wiring as in the video? And where did you buy another battery from? Cheers

[@Rezrider74]

@@rossevans2814 Amazon but you can go to ancheer.com and look for a battery

[@Wutzmename]

@@rossevans2814 ancheer is the best place to buy a replacement for$170.00 USD. I'm buying a second one so I can double my mileage. If you buy from alibaba or some other company you may get inferior quality or not receive it at all. With Ancheer you get a 6 month warranty which is something you want.

[@ezgaming8101]

Vegas Romaniac lol

[@1MoreFish]

Thank you! I hope I will have similar success on my new Sondors E Bilk when I get it next week.

[@CashWarrenRadio]

Would this work on the ancheer ebike commuter bike 48v 350w? I peg out at 18mph.