You're a smart guy and befitting lots of people as well
@MyAirbags4 жыл бұрын
@nemozzzz1 Thank you for your feedback. I'm very happy to help!
@robertharding75810 ай бұрын
Very impressive work and your teaching skills are amazing and unique
@MyAirbags10 ай бұрын
Thank you so much 😀
@bwilliams18155 жыл бұрын
Thanks for you advise. Sending my 2018 VW Atlas seat belts and module tomorrow to you
@MyAirbags5 жыл бұрын
Brian, Thank you - we are happy to earn your business! We are always here to help. www.MyAirbags.com
@martytimperio57933 жыл бұрын
Thanks Eli your video was very helpful
@MyAirbags3 жыл бұрын
Thank you, happy to hear that I could help you!
@carmelom2694 жыл бұрын
I wish you would have showed how to remove the two yellow plugs, and the star shaped bold at the bottom of the pre-tensioner. What size socket fits this star shapped bolt?
@MyAirbags4 жыл бұрын
We apologize we weren't very specific on the pre-tensioner. If you do find out what size it was, please post here for other viewers. Thank you for bringing this issue up.
@jonathanvilla97274 жыл бұрын
hello thanks for yo videos ..i have quetion i have a 2012 jetta that car need airbags and seat belts but i have a 2015 jetta the airbags and the module are the same
@vitaly154 жыл бұрын
If the airbags look same, fit and clockspring plugs connect properly then the airbag will work. Airbag module is different because part number is different. Also, the VIN that is stored in the module will be different. It is best to have your original airbag control module reset. Send your original module to MyAirbags for reset. You should also send your seat belts along with the airbag control module and save hundreds of dollars! Visit www.myairbags.com or call 1-855-770-4055
@jonathanvilla97274 жыл бұрын
@@vitaly15 thanks fot the help im gonna sned thad ass son its posible
@vitaly154 жыл бұрын
@@jonathanvilla9727 will see your parts here soon. Will just take 1 day for reset then mail it back to you. Thank you for your support!
@MyAirbags4 жыл бұрын
Jonathan Villa, Thank you for your questions ans support. We are happy to help! www.myairbags.com
@nanitaperry79043 жыл бұрын
Very helpful
@MyAirbags3 жыл бұрын
Very glad it helped! www.myairbags.com/
@MohamedMohamed-ej2rz2 ай бұрын
My Nissan Altima 2015 airbags came out Then I changed 2 New airbags but airbag light didn't go
@MyAirbags2 ай бұрын
The airbag control module needs to be reset after the vehicle was in an accident. Also check the seat belts as they could be bad as well. MyAirbags does reset airbag control module and rebuilds seat belts. Checkout myairbags.com
@emmanuelsellokgwedi41434 жыл бұрын
Hi guys I'm in South Africa.... and my polo has the airbag light on..... how do I reset it or who would you recommend i go to? If you have any affiliates in SOUTH AFRICA.... please help
@MyAirbags4 жыл бұрын
First start by diagnosing the airbag light. Hook up a scan tool to the car and read the airbag codes.
@abrahangarcia659910 ай бұрын
Hello, good evening, I bought a crashed 2017 Passat Rline but with good bags, the problem is that the bag light is on please help
@MyAirbags10 ай бұрын
Have you checked the seat belts to make sure they are working good? If the seat belts are not working properly, then they should be replaced or rebuilt by myairbags.com. Also scan for DTC codes using a diagnostic scan tool to see why the light is on. It could also be a bad airbag control module. If it is bad then myairbags.com can also reset the crash data/crash codes. If you scan and pull the DTC codes and post it here, we can help.
@scaleartsg Жыл бұрын
the jetta has a design flaw in which the module is sitting right under the aircon piping which when clogged will leak water onto the module thus frying it.
@MyAirbags Жыл бұрын
Thank you for sharing! It's unfortunate to hear about the design flaw in Jetta's module placement.
@safeedeensalah53665 жыл бұрын
Good advice . Thanks a lot . S question please " How to get a clean EEprom file to reset my Drs of Ferrari .." Thanks again .
@MyAirbags3 жыл бұрын
Thank you for commenting. For your needs and service: www.myairbags.com
@jttj12542 жыл бұрын
U0151 No communication with restraint control module on a 2010 Jetta. What could it be? Not sure if it has been on accident all bags look ok
@MyAirbags2 жыл бұрын
Most likely the airbag control module is bad and needs to be repalced
@aleksistar631 Жыл бұрын
Hey Eli ..I was recently in car accident. My seat and curtain airbags were deployed and all the seat belts were locked . I've since replaced all the airbags and the seat belts. Will I need to reset the airbag module or change the crash sensors? Any feedback would be greatly appreciated. Thanks
@MyAirbags Жыл бұрын
Yes, the airbag control module needs to be reset, which can be done at myairbags.com. Crash sensors are usually good and don't need to be replaced unless they are physically damaged.
@kaysiarobert51833 ай бұрын
Did you replace by yourself or had it installed professionally? @aleksistar631
@laguionox6621 Жыл бұрын
My 2016 Jetta was flooded, now getting Airbag Module codes 01321, and about 6 other "airbag - implausible signal" codes. My issue is the airbag light doesn't come on at all (during self-check). Is a replacement or reprogramming needed for this? Thank you!
@MyAirbags Жыл бұрын
Replacement is recommended for the flodded module. Check the part number of your original module, then type in part number at myairbags.com for replacement unit.
@crobertsmedrep5 жыл бұрын
If the SRS module is removed on a VW, does it disable the power steering?
@MyAirbags5 жыл бұрын
crobertsmedrep, Thank you for your question! Personally I have never seen the power steering become disabled due to an absent srs module, but that could very easily be the case. I have seen in some other makes and models, where the ignition becomes disabled without the srs / airbag module. If you do find a more definitive answer, would you mind posting back and letting our community know of your findings?
@ma7siri5 жыл бұрын
What if i have a module which was water damaged a and u want to replace it with used 1
@MyAirbags5 жыл бұрын
@Mohammed Almahsiri, great question! If the module was water damaged, we recommend a complete replacement. Look at the module inside your car and you will see a part number right on top. Once you have that part number you can purchase a replacement. We actually do have a large inventory of modules in stock. You can check to see if your part number is in stock here: www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-control-modules-ready-to-ship/
@shukriahmad38894 жыл бұрын
Hi.. I have problems with my airbag module on Golf Mk7 cannot coding after I replace with new one due to my aircon cooling coil leak hit my old airbag module.. can u advise how to fix it... thanks
@MyAirbags4 жыл бұрын
Shukri, If you look at the original module and the replacement module, make sure the part numbers are exactly the same. Then you would have to code the replacement module to the car, using a VW/AUDI scanner / scan tool.
@StevenPatrick3 жыл бұрын
so how do I reset my module? my vehicle wasn't in an accident but the airbag light just came on tonight and stays on ( 2001 jetta vr6 2.8 ) .... I just replaced the front passenger side window regulator but i don't think this year has side air bags so im not sure if replacing the window regulator interfered with the module
@MyAirbags3 жыл бұрын
We reset crash data and crash codes after vehicle was in an accident. In your example it is simpler, since the vehicle was not in an accident. If the airbag light just came on one day, then something tripped it. Most of the time it woukd be a wire or a plug got loose under passenger seat. I would check there first. If all looks good, then get the system scanned with a diagnostic scan tool that would read codes and then you will know the problem, like a bad impact sensor, bad airbag, bad seat belt. Then those parts may need to be replaced or just the connector plug got loose. We also do rebuild seat belts saving you hundreds of dollars in an event that your seat belt is bad.
@MyAirbags3 жыл бұрын
Replacing window regulator should not trigger air bag light. The side airbag should be in the seat. However, inside the door, there could be an impact sensor. If it is there then maybe you did not reconnect the plug connector?
@StevenPatrick3 жыл бұрын
No plugs were left unplugged so I dont know why the airbag light is suddenly on but anyway thanks for your suggestions ill check the connections
@khaldounmnb51975 жыл бұрын
Great video. And cool you answer questions here.
@MyAirbags4 жыл бұрын
Thank you! Glad to help.
@akele2633 жыл бұрын
How to check wiring of air bag ,
@MyAirbags3 жыл бұрын
Check if connectors plugs are melted. If they are melted then you will need to change the clockspring or just the melted connectors. Usually the clockspring will be okay.
@lukeagnor78273 жыл бұрын
How do I know if My module needs to be reset?
@MyAirbags3 жыл бұрын
If your vehicle was in an accident then it will have crash codes and crash history that needs to be reset for the airbag control module to be used again.
@arturoreveles3382 Жыл бұрын
Is it possible to keep using the car without the module while it's being repaired by you?
@MyAirbags Жыл бұрын
The vehicle will still run and drive without the airbag control module. But of course, you will be at risk and airbags will not deploy in an even of an accident.
@ThatRoddy5 жыл бұрын
Where do you find the index number for coding?
@MyAirbags3 жыл бұрын
Thank you for commenting. For your needs and service: www.myairbags.com
@jesusbarrera3084 жыл бұрын
Hello !! I have a 2012 jetta gli and air bag light came on months ago ! I just checked and says airbag module faulty , need to reset or neee another module ??
@MyAirbags4 жыл бұрын
Hi Jesus, if the module just fried on its own, then we would recommend to replace it. The module reset service is for post accident vehicles.
@shoibahmed4374 жыл бұрын
Hi, can I send my airbags from india
@MyAirbags4 жыл бұрын
Shoib, We do not recommend shipping the airbag computer from International. We are Domestic only. USA and Canada.
@-UmarKhan3 жыл бұрын
will erasing data get rid of my check sum error on a 2014 audi a3?
@MyAirbags3 жыл бұрын
No erasing only clears crash history. Check sum error is most likely due to internal data corruption. Usually happens when you jump-start the vehicle.
@syedsubtainhaider47853 жыл бұрын
Wwr about u based in uk
@MyAirbags3 жыл бұрын
We are in Buford Georgia USA
@Odocracker2 жыл бұрын
Нахрена бадери все клеммы билиять снял ?
@MyAirbags2 жыл бұрын
Disconnecting battery cable, to make sure airbags dont deploy while removing or installing airbag control module.
@estuardojuarez2665 жыл бұрын
Hello, I have a jetta mk6 2013 2.5 style active, yesterday the water was put into the car at the level of the arm rest, due to flooding, we located the air bag module we took water and applied dw-40 and ran the Vcs program but the message that does not recognize the air bag module, there is another solution ??
@MyAirbags5 жыл бұрын
Hi Estuardo, In your case, we would recommend to replace the airbag module because it has been flooded. You will need the part number from the original module to search for exact, correct replacement. We do have many in stock. Go to our inventory search page and search the PN / Part number: www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-control-modules-ready-to-ship/
@scorcha1005 ай бұрын
Is the location of the airbag module the same as in a 2019 skoda octavia ?
@MyAirbags5 ай бұрын
Yes it should be very similar and will give you a general idea on how to locate and remove it. We have an airbag module location lookup on our website for almost any vehicle. Here is the direct link for the airbag module lookup: www.myairbags.com/srs-airbag-control-module-location-lookup/
@syntheziz31204 жыл бұрын
any help on finding the front airbag sensor?
@MyAirbags4 жыл бұрын
Great question. We've got some help here: help.myairbags.com/hc/en-us/articles/360001391787-How-to-Change-SRS-Impact-Sensors
@edwin86883 жыл бұрын
Hello, good night, my car turns on the air bag light. Put scanner and gave me the code B101D15 and say seat belt switch passenger side short circuit/ short circuit to positive Same B101D11 But negative And already remplacé the swich seat belt My car had an accident but did not rupture the airbags You think that by resetting the module this would turn off thanks
@MyAirbags3 жыл бұрын
Yes airbag control module needs to be reset first. Because your module has crash data and locked the module. Also, seat belts do need to be replaced, the codes you are getting. But as I understood you saying is that you already replaced seat belts. We do rebuild seat belts a and reset airbag control modules. For Airbag Control Module Reset: www.myairbags.com/product/airbag-module-reset-3/ For Seat Belt Pretensioner Repair: www.myairbags.com/product/seat-belt-repair-1-stage/
@mode20014 жыл бұрын
Hi, I am from Mexico, the car audio instalar pass a cable in the glovebox but he disconnect the airbag cable in the glove box and after that the indicator in my jett turns ligth on, I have a jetta live 2016, do i need to reset it? or this will be normal by it self?? thank you, I bougth this car 0 kilometers brand new I never had this problem, thanks
@MyAirbags4 жыл бұрын
Hi Jose, The first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes.