How to remove the Engine from a 240Z - Step by Step Explained

In this video I'm showing how to remove the engine with transmission from a Datsun 240Z. This is a Californian Model from 1973, built in November 1972. It does have an aftermarket AC system installed, has an overflow tank on the radiator, triple Weber carbureters and also another exhaust installed. So some steps might be a little bit different than on your car.
I hope you like my work and enjoy the video.
Huge thank you to all of my Patreon supporters and especially to:
Adel AlSaffar
AK
Alfonso Baz
Alistair Moor
Amar.k
Arron Metcalf
Ben Sigelman
Bike Kefeli
Brenna Redpath
Bryan Knauer
Chris Walter
Dane Prince
David Barker
David Lehnus
Edward Conway
Haitham Al Zir
Harrison Angsten
James
John Shebanow
Joseph Kamps
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar Marsten
Kerem Yollu
Lambda GPU Workstations
LordPi
Mark Tesmer
Mellissa Marcus
Mister Patina
Nathaniel Jack
NoLoneSurvivor
Pat Thrasher
Peter Cyprian
Peter Riddett
potokslow
Ryan Pickett
Scott Tomlin
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
Yale Baker
Yuri Zapuchlak
Aaron Funk
Adam Holtzclaw
Alipasha Sadri
Andre
Andrew Lavergne
Andrew Phillips
Antal
Arni Bjorgvinsson
BitBison
Bobcat Johnson
Bonnie Williamson
Brett Pitts
Brian Hoerl
Caleb Betczynski
Chad Bryant
Christian Fjelldal
Crystal Cash
Damien Fuller-Sutherland
Daniel Trejo
Daniel Varga
Dave Hardware
David Chang-Yen
David P Hruska
David Powell
Dustin Davis
Dylan LikeBobDylan
Erik Nordby
Grant Daniel
Haley McFadden
Hard_Boiled
Jack Curry
Jacob Hamm
James Berwind
Javiera Ignacia Jeldes Pizarro
Jaxon Gray
Jeremy Cole
Johan Vergeer
Joël Franusic
Justin Blackwood
Jörg Thomsen
Ken Rosso
Kevin Rechsteiner
Kevin Robinson
Kurt Gazow
Leon Fox
Marc Cerisier
Marcelo Teodoro
Mary Casella
Mellissa McConnell
Micah Reid
Michael Lamp
Michael Masouras
Mossy_Forrest
Nemo
Peter Read
pk42069
repülő búgás
Robert T McCune
Scott Marshall
Stefan Kronander
Steven Michalcewicz
Svenja Kuckla
Taylor H
Thanny
Tim Holt
Torben Arneberg Jensen
Trevor Kam
Tucker Ifft
Victoria Emmenegger
William
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ mymechanicsinsights
My Patreon Page:
/ mymechanics

[@willhan2294]

I will probably never remove any engine from any car in my life. Still, I find it very satisfying learning how it can be done.

[@xxxggthyf]

I still have nightmares about the one and only time I did it. A Ford Sierra XR4x4 which pretty much involved dismantling the entire front end of the car.

[@jdmjesus6103]

I've removed countless engines from cars, I still watched. I didn't really learn anything, but it's still a nice video.

[@WasLostButNowAmFound]

I've done about 20 during my military service. Tricky things to do.

[@Flopsaurus]

If you're watching this video and are interested in stuff like this, there's a solid chance you'll find yourself doing it one day!

[@rbiten]

+1

[@TheBojengles]

Zero doubt in my mind that this will be one of the nicest Z’s on the planet by the time this series is done

[@yoshyoka]

I give you a tip for the insertion/removal of rubber or silicon hoses that saved me lots of swearing: use isopropanol alcohol. This alcohol is a very good lubricant for rubber and silicone and will allow you to slip on/off hoses very easily. Moreover once a hose is on, the alcohol evaporates very quickly leaving the hose secure in place.

[@Zimiorg]

Works also perfectly for bicycle handlebar grips 🙂

[@joakimvhes302]

Thanks for sharing, can't tell you how many swears I've thrown at hoses that were stuck for good or broke when I tried to pull them off and then resisted getting put back on xD

[@aserta]

The removal part is the most useful with this trick. IPA seeps in and loosens the hose. If you have a specific shape hose and you don't want to damage it so you can find another or make another... this is vital to do.

[@fwfindawan1481]

Thanks for sharing ❤

[@panpajonk8393]

Won't IPA damage the hose? It damages plastic, wouldn't it be the same for rubber?

[@chainq68k]

He has evolved! After he made the most perfect restorations, now he's making the most perfect car tutorials! Love it, keep 'em coming!

[@Arman-ic9cg]

PLEASE! make a video on how you organize all the parts after disassembling in such a big project. I can't imagine not losing or confuse at least half of the screws and bolts.

[@ArniVidar]

It's actually quite simple. Just a whole heck of a lot of Sorting Boxes (screw sorters, Sortimos, whatever you call it) with lids, and label every compartment with where the part came from. 🙂

[@ASIFALI-nd8rp]

Yeah me too

[@marwahsadiqakhan3129]

​@@ASIFALI-nd8rpyes

[@JankoWalski-uo2br]

Knowing your mechanical skills and accuracy this car will be restored to perfection.

[@TheDoctor0660]

1:29 "My car has an overflow tank, and I also removed that hose" **snap**, I laughed uncontrollably at that point, any person who has ever worked with cars knows that feeling. Love the content.

[@Datsun.Autowerk]

I would say that this is the best tutorial you can find on youtube. Unfortunately, most of the videos before it are always way too short and backed by terrible music. Your channel is simply the new gold standard when it comes to Datsun restorations.

[@mbatur35]

Why do you hate music so much? Annoying because a music style you don't like is playing?

[@jerrb7991]

This is his second channel for clips and behind the scenes! You can find longer videos in his main channel "my mechanics"

[@anterprites]

@@mbatur35 It's irrelevant and distracting. If I want to listen darute sandstorm I will do it on my own.

[@Wolfeur]

@@mbatur35 Some people don't like the constant audio stimulus and enjoy the simple and quiet styles. The fact that the main channel has no music and no speech is one of its main appeals.

[@skyfighter9797]

I don't understand why you waited so long to start voice-commenting your videos. You're english is fantastic and your voice is pleasant! You are really doing an awesome job, hope to hear a lot more from you in the future! 🥳

[@jean-lucpicard3012]

Agreed his voice is buttery smooth

[@Sashazur]

His voice is good, but I enjoy the peacefulness and focus of the videos he does that only have the sounds of the work going on. It gives me a feeling of observing rather than of being taught, if that distinction makes sense.

[@ArniVidar]

@@Sashazur That's precisely the difference. When he does a tutorial, he narrates. When he works, he's silent. 😀

[@PaulGraville]

Everyone on KZbin needs to take note! Loads of detail and, more importantly, no fluff. Most other videos of this would be 5 times longer yet less detailed. Master of editing - this is how it’s done! Thanks!

[@markdev5518]

F*ck yeah!!! A new video right on Friday!! Dude I am saving it to sit back and relax watch it after work!!! Man I love your videos!

[@RazingthenRaising]

In all reality, this is the best general information that I have ever seen for how to deal with removing an engine. There are obvious differences between cars and engines, but the overall information is the same, and is EXTREMELY good to understand!

[@fixxzitt]

Knowing how detail your restorations have been, I can’t wait for this one

[@brendantaylor6879]

Great step by step! Not just for this car, but for any engine removal, this is a perfect tutorial that covers all the basics! Any other engine removal on a newer vehicle or different layout is just a variation on this exact process. So good!

[@TheFurriestOne]

Also remember the petcock drain on metal radiators may be left-hand threaded! For a faster drain, the entire petcock valve can be unscrewed from the radiator, likely a right-hand thread. This does carry some risk of damage to the radiator if the threads are stuck, as the bung could tear out. A safe, well-done and well-explained removal, nicely done!

[@fish_bacon]

I have now acquired detailed information on something I'll never need or use in my life. It's a good day.

[@christopherbedford9897]

Have to say, when I saw that engine leveller last week I was astounded. Such a simple yet obvious aid. Certainly wish I'd had something like that back in the day.

[@xx1590]

I have been watching your rebuild projects for some time now as they are so beyond all the others on KZbin. They rise to the level of artwork and just always a great pleasure just to watch. I was so surprised when you began this project knowing the huge amount of effort that this will require it seems daunting in size and scope particularly having become accustomed to your intense high level of standards with the details. If it can be done I am sure you are the only one that can ever make it happen. And thank you for not using the ever-bad background music.

[@tomjackson1333]

What great memories. Back in 1979. I moved to Los Angeles CA. With my 1966 MGB. I was only 17 years old. My neighbor had a very similar Datsun 240Z .

[@balanair2577]

You are better than a University professor on your explanation. Whenever your video appears I put everything else aside and watch the video to my wife's constetnstion..

[@svgalene465]

I’ve pulled a number of engines over the years, from tiny 1L I-4s to big American V-8s but I’d never even heard of an engine leveler until I saw your video. I sure wish I had - it would have made things so much eaier.

[@JDeWittDIY]

Also called a load leveler. Very useful for lifting many things.

[@russellfernandes9607]

You get a gold medal 🏅 from me for the best restorations!

[@Vickie-Bligh]

This was so much fun. Thanks, MM. And I loved the safety pin.

[@jasonbroderick09]

Very detailed and the camera shots are the best I have ever seen as a mechanic of 30 years (Almost). Great job and new subscriber! 👍

[@NickfromNLondon]

I love following your videos and on this channel we get your voice over. I love your Swiss accented English.

[@Omnilatent]

The dad of my best friend in elementary had such an engine crane in his yard. He restored some very old car, too (I think it was a Triumph TR3). The yard was also used by a stone mason and I always assumed it was for their profession. 25 years later and now I learn it's for engines and not stone!

[@toomanyhobbies2011]

Plastic bags, zip ties, and markers are the way to go with organizing bolts and such. Replace all bolts in their original locations as you take things apart (whenever possible). Making videos of the process is just about ideal. Looks like you had a great time rebuilding this Z.

[@user-dn7hm3oo2g]

I have just completed my engine removal using this video. It is perfect as-is MM. Thanks again.

[@ShainAndrews]

Underside looks really clean. That exhaust was something to look at. Transmission oil looked good. Small leak on the output shaft. I can smell the oil from here LOL.

[@sed6]

Back in 1992 I slapped a $250 junkyard motor in my '78 280Z 2+2 and put another 50,000 miles on it! I later warped the head and cracked the cam after overheating it, could not machine it back within spec, so I stuck a feeler gauge or two under the cam towers that were still binding, cut them off and slapped the valve cover on, they never failed!

[@2tommyrad]

I remember the 1st time I saw a 240Z. It was 1972 and I missed the bus and had to hitchhike home from high school. Standing at the Wendy Dr onramp to 101S, I saw a car I'd never seen before across the street sitting at the red-light. As it went by [didn't pick my up, by the way, lol] I scanned the car for identifying badges... all I saw was 240Z. I wanted one [ -$$$$- ] so a year later I bought a 1968 VW Bug with black & white tuck & roll seats. Shout out to Bruce B. for the engine-work!

[@garymucher4082]

Knowing his ability to refurbish everything back to beyond new looking again, this huge project will be seriously interesting to watch... Thumbs Up!

[@edgy1rocks]

I love the triple Weber setup on this car. It’s a chore to keep them balanced but it’s a much better setup than the dual Strombergs that were OEM. Before I changed out mine, I would vapor lock in the middle of a Cheyenne blizzard after ten minutes of driving. Really looking forward to seeing how this all turns out! Thanks for the memories!

[@cprooks]

If Only It Was Still This Easy On Newer Cars

[@mississippster-qq7wc]

Outstanding. Gave me flashbacks to helping my dad remove the 4.2 liter 6 on his 1966 XKE Convertible. We had to do it twice over ten years when two clutch plates blew apart. We did not have a leveler. That would have saved us hours.

[@Grommie122]

That's it, thanks for watching. You take the place of my late uncle John, who always had me help with his builds. '72 El Camino with a 454 out of a Chevy 3500 was one of my favorites

[@SamFathallah]

I would love to see a video where you talk about how you keep all the parts and fasteners organized.

[@yobgodababua1862]

The perfectly clean garage space just blows my mind, as do the somehow perfectly clean hands. After I do any automotive work, especially with stuck bolts, my knuckles are invariably skinned and bloody. I cannot wait to see the rest of this project and find out what missing parts will need "new ones".

[@dave3156]

This is a very interesting series to watch. Anxious to see the final product--with your work, it will look better than new. Thanks for sharing

[@RROOBBWWAANN]

3:03 As a guide, you should tell about the battery at the beginning.

[@mymechanicsinsights]

Well, definitely can't disconnect it too early. Good point.

[@t0mn8r35]

Your English is excellent. This is a very interesting project.

[@di99utpe]

So many words I have no idea what they are. But it's fun watching someone who knows!

[@user-dn7hm3oo2g]

This is a clear and concise tutorial. I will be doing this to my 240z in November. Thank you MM!

[@liquidsofa]

I love hearing "speed-oh-meter". It rings so funny in my ear! 😄😆

[@janskeet1382]

Well filmed, well edited and the English is beautifully enunciated as well as concise and technically informative. As YT material goes this is benchmark.

[@EmileVermaas]

My man sounding all chilled while I’m holding my breath stressing about how he’s gonna put it all back together again…

[@refaelgreenblatt4005]

Like everyone elses here, absoloutly love the new direction your channel has taken. Enjoying my saturday morning coffee watching something i will never do but inspires me to do my own things the best i can! Thank you

[@ZENO357]

Surprised to see only hand tools instead of pneumatic tools. Patience and strong hands!

[@freedomfirst9819]

HEY!! You talk!.. I'm fooling sir, I LOVE your videos.. Every single one of them, I watch them all.. Keep them coming sir, thank you. 👍

[@Jwil3743]

Everything in your shop is so clean- this is no exception.

[@mikequinlan9585]

You make this look so easy! Thank you for the calm straightforward instructions. 😊

[@gadoosher]

This is such a behemoth of an undertaking. Can't wait to see the rest.

[@caribmedical57]

Man, keep uploading these short videos. It keeps us posted with your progress and your processes. 😄 Can't wait to see the end result! 🚗🚗🚗🚗

[@hectormaluenda]

Thanks for the video, currently I'm working on my 00 Impreza WRX and I need to remove the engine soon, this video gimme a very good idea of the tools and equipment I need. 5/5

[@patrickperry6945]

I await on pins and needles for more of this restoration.

[@GrimoneAsur]

This video looks like old 30's american tutorials. It only needs specical music and a splash screen. :)

[@Rick-hp6fu]

Excellent thorough step by step of removing the engine from this classic. The simplicity and minimal amount of cables/wiring in these old cars makes this a much easier task than a newer or modern car. Been a long time since I pulled an engine from a car. I would have loved to have an engine leveler at the time. Having to remove an engine and transmission with just chains on a cherry picker is such a pain, and you're almost guaranteed to damage something. One tip that I saw from M539 Restorations, when draining a transmission or differential, remove the fill plug first to ensure that you'll be able to refill it after draining. That would be a big problem if doing a fluid change and you couldn't get the fill plug off after draining it. May not apply in your situation but certainly a useful practice. Can't wait to see this engine get rebuilt.

[@KiwiPokerPlayer]

The best thing about old cars is they are so easy to work on. There is so much room under the hood compared to today's cars. No beauty covers either, I hate those things, the hood IS the beauty cover.

[@Sashazur]

Yeah, it’s just a piece of plastic to get in the way, I don’t see the point! If you argue that it helps keep stupid people from messing with things they should avoid, it does not. It doesn’t hide where you add oil, coolant or washer fluid, so they still could mix those things up. There are videos with lots of examples.

[@KiwiPokerPlayer]

@@Sashazur Exactly, I have an example. My mate saw me working on my car and decided he could work on his car too. That resulted in him filling his engine to the top with water because he thought the icon on the oil cap was a watering can and he was filling his radiator.

[@tommythebiker3081]

6:22 love this editing bit!

[@livingthedream669]

Great Scott! You speak! Excellent tutorial on how to remove the engine. Looking forward to this series.

[@ElcioThenorio]

Perfeccionist as we know you are (and here is the beauty of watching yours videos)... this is going to be a loooong journey. Thanks, from Minas Gerais.

[@robertalvarez15]

Great video, short but very informative. Thank you for sharing.

[@DustinSeiger]

I have been so excited for episode 2. This should hold me over😊

[@pabloabregu5502]

you make everything look easy, so professional!

[@TheFlan80]

OMG, been waiting for the next video on this series!

[@aquamir]

Ich verstehe bei der Sache nur "Bahnhof", bin aber trotzdem total davon fasziniert was hier vor sich geht.

[@foxwhiskey]

Hi. It's a pleasure to listen to your explanations and your very good understandable voice. Thx for showing. Greetings and best regards !

[@xxPenjoxx]

Really nicely narrated. If i ever needed to remove a 240Z engine, this would be the best tutorial for me 😂 Seriously though, every step was well explained-even giving alternatives for slight variations on the interior 👏 👌

[@herbicide]

as of today it is the best time in history to be restoring a 240Z

[@FuturePerfectContinuous]

Grüße aus Deutschland 😊 Tolles Projekt. Bin schon sehr gespannt wie es weiter geht ❤

[@MWPiczak]

I agree. A very well presented, methodical, well explained video. Best I have seen. Thank you.

[@that.ranranguy]

Thanks for the tutorial, super helpful! now to find myself a 240Z

[@Joebunker98]

youtube is the best user manual

[@Dopemaster-su2iz]

Amazing video as always, very detailed also

[@the_cursor]

I paid attention like I was going to do this on my own car. Great video.

[@dogsbyfire]

Another amazing video. I will soon be joining you on Patreon. Thank you so much.

[@thilo_117]

Endlich konnte ich das Vid mir anschauen, hab schon gespannt darauf gewartet das Nachschub kommt ^^ ich bin von deinem Projekt echt begeistert und wie es sich noch entwickeln wird. Am Ende dann, i made a new one 🙂

[@aroberts3213]

You are very good at tutorials. more please

[@RandyJames22]

Well lit, shot, and edited!

[@CJ-nf5jd]

Nice, you're lucky to be able to get one in decent shape. I blew the engine in mine and replaced it with a 350 chevy small block. that was many years ago. Best of luck on your restoration. Nice Webers.

[@brjones27]

I CANNOT wait to see this restoration!

[@hendriktabak7036]

Brilliant, as always!

[@Catalin1977]

Hi there!! Wish you all the best with the restauration!

[@scaleartsg]

seems like there is a lot of work just to produce this video! im looking forward to this restoration series!

[@lukehoudini]

this project is so exciting. (and your skills unlimited)

[@BigRigTrig]

It’s absolutely wild to me to see hose clamps on the aircon hoses, I’ve never seen that in my life 🤯

[@ShainAndrews]

That was some hackery.

[@chrisdaigle5410]

Aftermarket A/C installation is like that sometimes.

[@ShainAndrews]

@@chrisdaigle5410 Never seen that in my 30 years. Zero chance of it working long term. I've seen them ship with line and crimp terminations so a guy can take it to a local shop to get crimped.

[@chrisdaigle5410]

@@ShainAndrews Those installers couldn't possibly care less about long term. At the dealership I worked at, one guy installed 6 A/C units in one day. They only care if it works until they see tail lights.

[@RendallRen]

1:28 "I also removed that hose" 😂 I see what you did there.

[@MrSullismom]

Cars are truly amazing. Thank you.

[@MASI_forging]

Great work as always. 👍👍

[@tomswindler64]

Very informative tutorial.kudos 👍👍👍😎😎😎

[@tracybowling1156]

Great work!

[@gooddypm]

Your channel is brilliant. I’ll never be able to afford the tools you have. But watching you work is so relaxing. You and DIY Perk may not upload as much as others, but when you do are they worth the wait. Looking forward to this series. The car will be better than new when you’re done.

[@screwsnutsandbolts]

Great video 👍

[@aljames8908]

Great video, thank you! A set of ratcheting wrenches would do you good.

[@israelgarcia7269]

Honestly, I never expect to own one of these(I'm more of a mustang guy). But I enjoy your content so much that I watched this whole thing. Also, I figure any extra knowledge about cars is good knowledge.

[@Lendium1337]

This car will be more perfect than a new one.

[@danwoodward7738]

The only person that can do all that and always have clean hands😂

[@nathkrupa3463]

Bro you are knowledge and awesome good work sir thanks for sharing 😊

[@sarahhardtbern]

Loved the safety pin

[@DarKxMaze]

This is what we need online!