Video showing how to remove the front bumper on a Land Rover Freelander 2 / LR2
Пікірлер: 29
@AlanTomkins10 жыл бұрын
Fantastically useful as I need to replace the washer bottle and aircon pump. Thanks for taking the time to record this. Alan
@Afterburner001110 жыл бұрын
You forgot to remove the towing eye cover as there is also 2 bolts in there to remove aswell, Great guide removed my bumper easy with this video. Thanks
@davidnowell17019 жыл бұрын
one of my front proximity sensors had dropped back into the bumper. After being quoted my arm and leg to retrieve it i used your video to move the bumper just enough to reach and reinsert
@Lucasm41025 жыл бұрын
Thank you very much. I had to remove the bumper to fix a dropped in parking sensor. With your video it was a quick job.
@JRFXR610 жыл бұрын
Hi guys, thanks to you I was able to remove the front bumper and surrounds to replace a crook thermo fan, great video and saved me a fortune, job well done!!
@daltonxk9 жыл бұрын
Very helpful. Thanks for taking time to do this video!
@HallidayDrJake9 жыл бұрын
I have just replaced the hood latch and hood open sensor - which required dropping the front bumper. Your video covers it perfectly.
@lankavidanapathirana6 жыл бұрын
Hello, i have to do the same thing, did you have to remove the headlights first to get access to the hood latch?
@Stirlingv8 Жыл бұрын
Thank you so much - wing now changed thanks to you.
@NickandJane6 жыл бұрын
Thanks I only wanted to take the grill off, but it looks like it comes with the bumper - nightmare. Cheers guys.
@6969rossi4 жыл бұрын
Good video. I have the same vehicle. Do I need to remove front bumper guard to have access to the car horn connection.
@emilyapple77105 жыл бұрын
Hello, thanks for your wonderful videos. They are so helpful. I am needing to remove the rear bumper of a 2008 freelander 2, as one of the parking sensors has popped out into the bumper. Could you all help me with this? Is it similar to the rear bumpers for other models in your videos? Thank you!
@Newmusicreview3 ай бұрын
Just spotted this vid.....Can I replace the parking sensors without removing the whole bumper ?
@user-hv5fh4kx7q9 жыл бұрын
Very useful video. Many thanks.
@doug58532 жыл бұрын
Do you need to take the front bumper off if you are changing the bonnet sensor/catch?
@sawood5 жыл бұрын
Excellent video as always. This actually gave me confidence to buy my FL2 with its few minor issues and have since purchased parts from PowerfulUK! Can anyone confirm if disconnecting the front bumper connection on an FL2 (by front wheel arch it seems in this video) will allow the rear parking sensors to work on their own? My FL2 is showing the front two inner sensors as faulty, I suspect with a chafing wiring issue, but wondering if I can just disconnect them before I get time to remove the front bumper entirely. Thank you.
@sj33235 жыл бұрын
Hi - super cool to hear our videos have helped ! It may be easier to unplug the front loom from the control module in the boot - its behind the trim in the boot. I could look at doing this on monday if you like. This link should help workshop-manuals.com/landrover/lr2_(lf)/l6-3.2l/relays_and_modules/relays_and_modules_accessories_and_optional_equipment/parking_assist_control_module/component_information/locations/component_locations/
@lindsayblack21797 жыл бұрын
Can you access the headlight washer jet for replacement without removing the whole bumper. Great video too.
@L6637 жыл бұрын
You could try this .... i will do a video when i get the Freelander back from the bodyshop kzbin.info?o=U&video_id=hQFp7_l1IhA
@lindsayblack21797 жыл бұрын
That would be great. Thanks as I am hoping it can be accessed once the wheel arch liner has been removed. It could save me and other a heap of time.
@nb-wp2qz2 ай бұрын
Is it possible to just remove the grille wothout the whole bumper?
@L6632 ай бұрын
Alas the front grille is part of the front bumper !
@nb-wp2qz2 ай бұрын
@@L663 Thanks for the quick response.
@rileyparrish1845 жыл бұрын
What if I just wanted to change the grille? The one from the HST model is way nicer and I'd like to install it.
@L6635 жыл бұрын
To upgrade to the HST grille you have to cut your original grille out. Unfortunately the bumber and grille are all one piece on these so theres no easy upgrade, yet.
@L6635 жыл бұрын
Hi to fit the HST model grille you need to cut your old grille out - this is something we are looking into at the moment.
@majedmohammed92057 жыл бұрын
Hi do you have a similar video for a discovery 3?
@alexandreorlandini65894 жыл бұрын
Muito obrigado pela informação. 👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍
@TRANS.GAMER.GIRL.SMURFF3 жыл бұрын
I'm guessing it's the same principles for a Freelander Mark 1 made in 1994 #Powerfuluk