How to remove the front wheel on a GY6 scooter

[@heillordtroy]

Thanks...i wouldn't have been able to swap tires without this video for quidance.

[@jamelfenner9374]

I’m about to change the wheel on mine myself for the first time. Needed this video!

[@jamespignataro8735]

Great video, I had to use it last year for a different problem, perfect both times

[@OtisHarvey-d5n]

Should front rim an tire be directly in middle of forks

[@Steff320i]

I love the sound of the crickets.

[@stpius123]

Hey Paul, what would you say is the recommended torque on the front tire nut?

[@LabCoatPaul]

68 N-m

[@Rainaman-]

My front wheel is wiggling - what is more probable: bent axle or destroyed bearings?

[@eivad1]

Wish somebody made a video on front axle seals

[@jerrybootneck1736]

Thank you and still a very useful video. My granddaughter just bought this exact same bike as a project. Can you tell me the full name of it please? All she knows is that it's a Cobra 125. Thank you.

[@S.bizz05]

My issue I’m having is that the brake pad is scraping the disc every type I put it back on , any advice ?

[@LabCoatPaul]

Before you re-install the brake, push the piston back in to the caliper a little bit to make more space between the pads and the rotor. it is normal for the brake pads to touch the rotor, but the wheel should still spin easily. Here's a better video about the front brake: kzbin.info/www/bejne/aKGzlayrnt2cf6M

[@buckmajor]

Cool! I am going to change my one so this is very handy to know. @Paul - Any tips on how to replace the middle stand and side stand? I have a used one on but I think I'm missing something and it keeps coming undone. Would appreciate your help on this one. Cheers.

[@LabCoatPaul]

If your stand keeps coming loose, you may have damaged bolt threads. These Chinese scooters typically have the worst quality bolts. You can try loctite, or drill through and use your own bolt with a locking nut.

[@15JDMRuckus]

What model is this one

[@Scotty__]

What about changing the tire /flat tire

[@LabCoatPaul]

Check out this video: kzbin.info/www/bejne/fmq5o6OVp8t3i8k

[@Scotty__]

@@LabCoatPaul thank you so much

[@liza-kf2xl]

I have the exact same scooter and iam having trouble removing the nut from the pulley so I could put a new belt on should I put heat to it?, the previous owner might had put some tightener ever could I find tools for this matter is there a web site? I have no patients as you can tell.

[@keox07]

Hi. What you need to do is to block the pulley through the two holes that you can see in it while you untight the 17mm nut. You can try to manage a home made tool for this one by yourself or just go to eBay and get one. What I done is to get an impact wrench which do not need to block anything and makes my life easier because if you want to remove the nut from the clutch it's a bit more trouble that the one from the pulley. I hope this can help you.

[@damonedwards1544]

Notice the fork can rotate. It's kind of a piece of crap. lol

[@galimirnund6543]

My front tire is going flat... not like a show leak but it goes instantly flat... I went out to ride it this morning and felt the tire ..it was firm like full of air.... on my way to the store it just went instantly flat ...do you know what might be wrong? I have had so many problems with my scooter...

[@CopperAirplane]

Might be the tire valve. Check the base of the valve for tears

[@unknownledgend1]

Thank you so much . I can do it now .

[@DrDnepr]

why does my wheel not spin freely after tightend it up ``

[@LabCoatPaul]

You probably installed the speedometer puck wrong. Take the wheel back off and check it. There are some notches that should line up with grooves in the wheel. If the brake is making the wheel not spin, you can push the brake pads apart gently with a screwdriver. After installing the wheel, make sure you squeeze the brake lever a few times before riding.

[@manuelriego1471]

thanks bro

[@grimborg8100]

nice vid tnx

[@CANSTANZA2007]

I do not understand why he took all the bodywork done, just extra work for nothing...

[@rainman6272]

He said it was so that the camera "can see things better"

[@stephencresswell4760]

Or just remove the 17mm nut and remove axle.......