Free Chinese 125 cc scooter left for dead. can it be saved ? needs an engine rebuild , new cylinder head and gaskets, carburetor clean and jet change. possible zombie scooter build on the horizon head bolts torqued to 20nn
Пікірлер: 62
@_Urbalist6 Жыл бұрын
"This petrol look like A fine vintage cider"🤣🤣🤣🤣🤣
@richardjweeks Жыл бұрын
Didn't smell like it though 😱
@黃凱德-w6d3 жыл бұрын
Excellent repair technology, even the GY6 motorcycle engine can be repaired.
@黃聖霖-r4e3 жыл бұрын
Gy6神引擎😆
@Manwichman2 жыл бұрын
God's got technology and engines that absolutely NO man nor angel upon this fallen world has! U can take that to the bank homie... No man made things rivals a thousandth thousand of 1% of what the Most High God has!
@brayli862 жыл бұрын
GY6 is relative easy to repair because there is not much inside. I did complete rebuild for less than 80€ and no experience. 4500km and still working.
@thedaydreamer79722 жыл бұрын
Good Job, I just rebuilt my top end today on a 150cc,,,,It would not start for a while,,,I fully charged the battery, hit it with carb cleaner and it fired right up,,,,,after the rebuild like this should you go slow on your bike for a while to break it in? Your video helped, TY again
@richardjweeks2 жыл бұрын
Pleased it helped and thank you for the positive feedback. I hope you enjoyed working on your 150.
@thedaydreamer79722 жыл бұрын
@@richardjweeks TY RIchard, do I have to go slow with this scooter after the rebuild to break t in or can I ride it normally? TY
@richardjweeks2 жыл бұрын
@@thedaydreamer7972 if you changed the piston and rings and or the cylinder, then it would probably be best to take it easy for the first 50 miles or so but if it's just a head lik mine was then you should be ok tho ride as normal as it won't need breaking in.
@agustrimulyono590526 күн бұрын
Seal kruk as bagian kiri ukurannya berapa mas
@mike-ology22 Жыл бұрын
We should add chinese subtitles to your videos and hopefully they listen and learn a thing or two ;). Thanks for sharing. I want to buy an old bike to repair. Tried a car to start on but think smaller engines would be better to learn.
@richardjweeks Жыл бұрын
Thanks for watching. Bikes are much easier to work on than cars, most parts fit on a bench.
@Barry-r8n14 күн бұрын
Great video. Thanks.
@loll19743 жыл бұрын
Great work great video
@surapongcharnal Жыл бұрын
Head Valve sound surrounding
@davidcoates48525 ай бұрын
"Oh silicone, who uses silicone?" I know right, what's wrong with the good old cornflakes box?
@moonliteXАй бұрын
I think its silicone and not silicon 😅
@richardjweeksАй бұрын
@@moonliteX not if you're dyslexic
@natvega1 Жыл бұрын
Thats the idea cheap, cheap parts, uses little gas, little oil, and can get you from one country to another for cheap, good cheap chinese.
@jemro.2860 Жыл бұрын
Hello Mr How are you plese wiring Diagram system motorsykel lighting and lgnition sent for me thank you
@mffpmffp4049 ай бұрын
What is that noise on the starter
@richardjweeks9 ай бұрын
Not 100% sure but I think it's the one way clutch bearing. It's stopped mortgage noise now after a couple of months of use
@colinsharp13143 жыл бұрын
Great job Richard nice to see you back mate
@richardjweeks3 жыл бұрын
Thank Colin. It's been a chaotic year at work with no let up. This project may be a little different from the last one. 😜
@williambinfield59663 жыл бұрын
Welcome back.
@Marcoshaciendocosas Жыл бұрын
Buen contenido. Justo estaba buscando para cambiar el cilindro, pero no se cual es el Torque de apriete de la culata
@furgame45682 жыл бұрын
0.5 mm intake 0.4 exhaust
@karirautio2 жыл бұрын
NO, NO, NO. Intake 0,004 inch ( 0,102 mm) exhaust 0,005 inch (0,127 mm).
@ronhoffman6806 Жыл бұрын
There are so many chinese scoots out there sitting around in back yards,barns,ect with very little wrong with them.
@richardjweeks Жыл бұрын
Good pickings for us to scoop up
@andyshondaxlsrestorations47333 жыл бұрын
Looks like you are having fun on this one no pressures no worries with this one. Nothing wrong with Chinese motorbikes ask Bill .Bill loves is one . Looking forward to see what you do with it
@chelseag2338 ай бұрын
Does cam chain guide rail go at the bottom of chain ive been looking for videos as ive just done top end rebuild now when you turn variator timing chain doesnt move just chain clicks as ive put cam chain guide rail at the top will this be why it isnt moving just clicking
@richardjweeks8 ай бұрын
hard to diagnose from what you have written. Cam chain guide goes in the bottom as per my video. It can't physically go anywhere else. Don't forget the cam chain tensioner as this is very important.
@richardjweeks8 ай бұрын
Sorry, there is a second guide on the top of the chain too, make sure it is facing in the right orientation
@davesogn33292 жыл бұрын
You didn't give us the torque spec of the bolts
@richardjweeks2 жыл бұрын
Sorry. An oversight on my behalf
@richardjweeks2 жыл бұрын
I have amended the description to include the torque setting.
@rouewilliams46012 жыл бұрын
Another video claimed 20 ft/lbs.
@SG-wv7qu2 жыл бұрын
Where did you order your parts from
@richardjweeks2 жыл бұрын
Cmpo, ( Chinese parts on line ) it's a UK based company in Exeter, good website and worth paying a couple of pounds more for the next day delivery.
@snakepearson94332 жыл бұрын
Thanks for the video and I like the part you talked about 150cc of Chinese power! 🤣 🤣
@richardjweeks2 жыл бұрын
Your welcome 😁
@MrMatt7132 жыл бұрын
Just cleaned the carb on my gy6 and it had the same green sludge... I don't know how
@richardjweeks2 жыл бұрын
I'm thinking it's the methanol in the fuel. It has a habit of corroding the brass, brass contains copper and this could explain the green tint. Just a guess though.
@mattandrade3010 ай бұрын
How can you be sure at top dead, center and is it possible to be 180° out on the timing? Thanks.
@richardjweeks10 ай бұрын
If I remember correctly, it didn't matter. I think the CDI sparks on both the compression and exhaust stroke. Valve timing is set at the cam.
@mattandrade3010 ай бұрын
Thank you. I have a newer scooter that I’ve volunteered to fix. I’ve got it up and running and if I shut it off, it will start right back up. If it sits for a day, it will usually start back up. But if it sits for a few days, it will not unless I pull out the spark plug dry it off and then it will start up Initially. I thought it was a head gasket issue because there was no coolant in the scooter and then I put coolant in the scooter thinking that I was helping it but now I think that it may leak into the cylinder but seeing the head on your scooter, I think that there might not be coolant journals to the head And I might have oil leaking past the rings? Not sure. Thanks for your help!
@mattandrade3010 ай бұрын
Just as a quick diagnostic fix, I was going to try to drain the coolant again run it and then let it sit and see what happened. Unfortunately I used purple coolant because that’s all I had on hand at the time so it’s hard to tell the color I guess I could try smelling it.
@azzdinehamlat9256 Жыл бұрын
Garage culbuteur R6 kojima moto
@Marve_4427 Жыл бұрын
Whats the best values for the valves clearence,i think my scooter is too shaky when idle
@richardjweeks Жыл бұрын
0.1 mm for both valves
@Marve_4427 Жыл бұрын
@@richardjweeks 🙏 thanks will adjust and see how it goes
@dariusmocan41572 жыл бұрын
good at how much power nm tighten the studs with the torque wrench nm
@richardjweeks2 жыл бұрын
18nm
@jeffmee7632 жыл бұрын
jet size is 105 for a 150cc on st air box.
@richardjweeks2 жыл бұрын
Thank you. That sounds about right. Being a 125cc a slightly smaller jet makes sense.