I work for Polaris rework and u can take the clutch out hole by using that tool but u have to take the black part and the two washers then put that tool in
@Hunterworks2 жыл бұрын
Good tip
@newera4k3332 жыл бұрын
I agree. I have a 2021 polaris ranger North Star 2021 and I had bought a clutch puller on Amazon. Thought they sent me the wrong one, followed the above instructions. Removed the black part, and two washers. Now the clutch puller fits like a glove.
@vrfarmerguy2 жыл бұрын
Clutch puller wouldn't take mine off....was stuck tight. Ended up taping about 3/4 of the shaft closed with electrical tape, filled with gear lube then used a regular 3/4” bolt and spun it in with the impact. Pressed it out like a hydraulic cylinder. Makes a heck of a bang though when it let loose!
@shoff20103 жыл бұрын
Thanks for your the extremely helpful videos
@Hunterworks3 жыл бұрын
Appreciate that
@samizook13 жыл бұрын
Well done Sir!
@chasewinters705010 ай бұрын
How do I get to this point though, meaning how do I expose the clutch like you have in this video.
@Hunterworks10 ай бұрын
We have a video to show you how to takeoff your clutch cover search our channel
@maryclear83182 жыл бұрын
Our ranger 1000xp was making a clicking noise in the rear end and would jerk when we took off is this an indication that the clutch is going out or has issues?
@Hunterworks2 жыл бұрын
Hard to say, always best to take the clutches off and look at them and see what you see.
@maryclear83182 жыл бұрын
@@Hunterworks well it was doing those things and we took it to back to the dealer because it was under warranty. They said it just makes those noises nothing to worry about. Well now it’s blown a belt and we have gotten in there and the clutch plate is cracked. And of course it’s not under warranty now. 😡 the fact is we knew something was wrong but we trusted them.
@Hunterworks2 жыл бұрын
@@maryclear8318 Clutches rarely warranted anyway. Be glad to help anyway I can with it, send pics to todd@hunterworks.com
@wrenn54 Жыл бұрын
Will there always be axial play on the secondary clutch??
@Hunterworks Жыл бұрын
it is not the clutch it is the shaft itself if you are grabbing the whole clutch and pulling and pushing and feel it moving.
@Freebird832 жыл бұрын
Thank you
@antkes Жыл бұрын
How do you remove the black part and washer
@Hunterworks Жыл бұрын
pull!! LOL
@jacobashley6773 Жыл бұрын
What is that lockout shim from giloman? What’s it do
@Hunterworks Жыл бұрын
locks out the ebs mechanism that fails a lot, the better fix is the EBS delete which we have
@shiannhoule67335 ай бұрын
What happens if you don’t mark it I forgot to mark mine will it after I watched this video, will it affect anything
@Hunterworks5 ай бұрын
No, each half of this one is balanced seperately
@shiannhoule67335 ай бұрын
Will I have to get it balanced I didn’t mark it like how you marked it
@Hunterworks5 ай бұрын
@@shiannhoule6733 no comes balanced
@shiannhoule67335 ай бұрын
How do I get mine aligned with the other half of the clutch? I got all the parts I just forgot to mark both side will it affect if I don’t aligned it correctly
@Hunterworks4 ай бұрын
@@shiannhoule6733 Not sure what you are asking, just put the two halves together, there is no right or wrong, each side is balanced separately
@candidosoto2363 жыл бұрын
Where can I buy that clutch puller for the xp 1000
@Hunterworks3 жыл бұрын
Us, www.hunterworks.com
@treygod7236 Жыл бұрын
Got a better lift than Polaris the plant 👀
@Hunterworks Жыл бұрын
What?
@raford2502 жыл бұрын
I know this is an older video, I chose to save $25 and not buy a clutch tool because his video shows you wiggling this primary and it comes off. Mine would not come out. So I left my machine down overnight and went to my dealer the next day to buy that tool. Mine didn’t come off easy at all and has low miles.
@Hunterworks2 жыл бұрын
You can't use a puller on this clutch until you pull the outside half off. What vehicle do you have?
@raford2502 жыл бұрын
@@Hunterworks it’s a 2020 Ranger 1000 Northstar.
@Hunterworks2 жыл бұрын
@@raford250 still got to take the outside half off by hand to use the puller
@vrfarmerguy2 жыл бұрын
@@Hunterworks mine won't come off by hand either.......and I've been working on it for way too long. 2019 xp 1000 Edit:. Nevermind, I finally got pissed off enough and found the right combination of words......fell right off then. 🤣