How to remove the taillight - Peugeot RCZ

[@adrievankempen2054]

Thank you very much for making this video, nice to change the bulbs at home so no problems on the road!

[@timbunker4529]

Excellent video, two points the connector to the loom is clipped to the car body, push in the tap at the top to extract the connector, its rather hard on the fingers. The RCZ manual call the bulb a P21/5, in the UK its known as a 380. I purchased an extra long life type.

[@KB-wk5wt]

Do you have any video of back bumper please?

[@MotorScotti]

All I have and know is on the channel. In sold the car three years ago, so nothing new about the RCZ so I won't post anything more about it.

[@CyberChatBox]

Hi, Someone bumped my car and pushed the rear left parking sensor into the bumper. Do you know if it is possible to access the parking sensor after taking out the tail light?

[@MotorScotti]

To my knowledge not if you remove the taillight but probably if you remove the rear diffuser you should be able to access them. I sold the car a good while ago and never had to do that but that could do the trick.

[@giorgigruzin]

Hello. Can you tell me what type of bulb fits? :)

[@vladimirvrsajko490]

great videos! just about to by one on saturday! but just to ask, which light is the ordanary bolb and not led? thanks for aswer

[@MotorScotti]

Hi Vladimir, only the actual taillight and the indicator are LED. The brake light is a P21/5W bulb.

[@wu34655]

I see you have the conectors behind taill light,that are disconected,i have them as well,do you know what are they for?

[@MotorScotti]

Nothing was disconnected apart from the tail light I disconnected manually. I don't understand what you are referring to.

[@MotorScotti]

I don't know what that wiring behind the taillight is for, I never had to do anything with it. I sold the RCZ a few months ago so won't be able to look into it.

[@wu34655]

No,you didnt disconect,those things,they are already there,two of them,one a little smaler then the other,its not exackly behind tail ligh,ist more,there when you open that litlle panel,seem like for alarm,it has some plastic black panel inside than you can bolt it in,place that you can see that something was there.

[@wu34655]

So those ugs are just hanging there,you didnt unplug them.i have the same plugs and i wanned to know if you know what are they for.

[@MotorScotti]

@@wu34655 My car didn't have an alarm. I don't know what that is.

[@shanepaull819]

I want to change my indicator lights in the wing mirrors of my 2011 RCZ can you help?

[@MotorScotti]

Sorry I sold the car 2 years ago, but I'd check the owner's manual, also.

[@MP5A93]

Hello @motorscotti ... it seems my LEDs are not working. Do you know can i fix them? Or do i need to replace to whole unit? Thanks ...

[@MotorScotti]

Hello, for the taillights I don't know if it's possible to fix them. Are they all out? Are you sure it's the taillights and not a fuse? Check that too. Maybe you could spray some contact spray on the connectors and see if that helps. Good luck!

[@MP5A93]

@@MotorScotti hmm that's a good idea, Ill look into it, thanks for the help.

[@RoadandRacetv]

Nice work! Excellent video.

[@MotorScotti]

Thank you!

[@ronzomass]

Thank you. This was a great help. Very clear 👌

[@MotorScotti]

You're welcome, thanks for watching!

[@carpediadiy2618]

please rear fog lamp changing and lamp tips video?

[@MotorScotti]

Hi! thanks for the comment. I'll upload my exhaust mod video soon. There you'll see hiw to remove and install the fog light element. Stay tuned :)

[@michelle3ocal]

You are amazing, pleaseeeeeeeeeeeee I need to know how to change the LED lights in the back :'( and where to purchase a LED light possibly. Ireland is crazy expensive.

[@MotorScotti]

Thanks! You'll have to replace the entire taillight. It's not possible to just change the LEDs.

[@ronzomass]

You can buy repair kits £20 , but it requires soldering skills and apparently is fairly tricky

[@timbunker4529]

When you twist the bulb out have a look at the bulb holder, 2 lugs are on its side, remember the orientation of this one lug is higher than the other, as you replace it into the bulb holder use the same lug on mine the higher lug towards the glass bulb is the correct way. If you put the lower lug in ie reverse small lug 1st the bulb will not be possible to turn clockwise and you could damage the bulb holder.

[@adrianosfax]

Thanks for the video thank to you i changed it by my self

[@MotorScotti]

No problem 👍 Thank you for watching!

[@Hindsightisgreat]

Useful video. Thanks for posting

[@MotorScotti]

Thanks for watching!

[@Ayaz_Qais]

hi How to remove fog light on rcz, please

[@MotorScotti]

Hi, have you checked the owner's manual? ;) front or rear?

[@harrymonk9365]

Great video

[@MotorScotti]

Thank you!

[@FabioDAuria-m7x]

Ottimo

[@MotorScotti]

Grazie

[@Urr_078_AKA_TTJ]

good video!! :)

[@MotorScotti]

Thanks Urwin!

[@vladimirvrsajko490]

thanks mate!