How To Remove The Wadding From A Closed Tank Petrol Lighter In Preparation To Replace The Wick

How to remove the wadding from a closed tank petrol lighter in preparation to replace the wick.
Related links:
dependableflam...
dependableflam...
Buy/Sell/Repair vintage cigarette lighters and other useful mechanisms at www.ebay.com/s...
Write about them at dependableflam...
Catalog them on / josephduane4972
Document them at / @dependableflame

[@Dismantled95]

I have a 1960s Joe Camel lighter, I just got done doing maintenance on it, replacing the flint, cotton wadding and the wick, and now it works like new again. I found it in a thrift store a while ago, now I got something nice to light my cigarette with.

[@DependableFlame]

Very nice!✌️

[@jmon-bv2kj]

This video was really helpful I just got a new lighter and I had no clue how I would change the wick out

[@DependableFlame]

Glad to be of help!✌️

[@uscorg]

My oring on my Ronson is bad, any idea what size oring I need? I have heard it’s not really an oring but actually a flat rubber washer

[@Camscorner420]

I’m having a lot of trouble getting the lock back in place, could you send a picture of how the lock should go in the cap?

[@DependableFlame]

If by "lock" you're referring to the actuating mechanism, this video might help: kzbin.info/www/bejne/n4WmaIipfNVrf6s Knowing the lighter you're dealing with could also be helpful. You can email photos of your lighter: dependableflame.com/contact-us ✌️

[@Isabella-xi6rg]

Hi! I recently purchased a 1950s Omscolite Lighter, and I was wondering if you knew what fuel would work best for it? Also it is in good condition and said to be unused so would I need to replace anything?

[@DependableFlame]

If it has a wick then Zippo or Ronsonol liquid fuel should work fine. As for the condition, chances are you will need new flint and possibly the old, degraded flint dug out of the tube where it has turned to concrete.✌️

[@davidg4081]

I just found and subscribed to.your channel a few weeks ago.I love it!!

[@DependableFlame]

Thank you David, I am glad to have you along for the ride!✌️

[@jimgee2676]

can i use a zippo wick or does it have to be specific to this lighter and if so where can i get one ?

[@DependableFlame]

I wouldn't use a Zippo wick in these old Ronsons. I use old Ronson wicks when I have them, otherwise I use the IMCO wicks with the wire lead cut off.✌️ There are links to purchase them here: dependableflame.com/helpful-lighter-related-links

[@mrweber4312]

I know its an old video but i need to ask i have to use specific kind o cotton or it doesn't matter???

[@DependableFlame]

Not necessarily, any absorbent material will work. I use the organic cotton coil that can be purchased from Amazon: dependableflame.com/helpful-lighter-related-links There’s a link to it about halfway down that page. As an Amazon associate, I earn from qualifying purchases. I have used cut up pieces of women’s underwear in the past!✌️

[@marcausn]

i think, if you are twisting the wool (or lighter) while pulling it out, it might be a little easier to do? at least that is what physics would tell me. didn't try it so far. maybe you can try it the next time and tell me if it worked, thx.

[@pawemielone9969]

Thank you very much 😍

[@leonlechon2610]

How often do i need to replace that?

[@DependableFlame]

Only if the wick disappears, disintegrates or otherwise will not light properly.✌️

[@leonlechon2610]

@@DependableFlame Ty :)

[@kayp5308]

I have an old lighter like the second lighter you showed but it’s huge! I was trying to find out more about it but it has no name😕 I was told they put out like parking meters on the street back in the day but can’t find anything lol

[@DependableFlame]

Go to my contacts page here: dependableflame.com/contact-us and email pictures of your lighter.✌️

[@kayp5308]

@@DependableFlame thank you sent you an email!

[@drispoli7]

when would i need to replace the wadding and wick? just when the lighter won’t light up with fresh flint and fuel?

[@DependableFlame]

Pretty much. If the lighter works fine, it shouldn't need it.✌️

[@Djchalk03]

Hi, same lighter, fill screw is stuck. Any tips on how to get it to unscrew?

[@DependableFlame]

It is a major problem which has caused me to discard many, otherwise good lighters. I have heard mineral spirits will loosen them but I have not confirmed this. Seems like mineral spirits could damage paint and obviously contaminate wick and wadding so be careful.✌️

[@Djchalk03]

@@DependableFlame thanks for the tips! I actually got it with a screwdriver and more pressure. Now the problem is no rubber washer! But it works and I am thankful for that much. I appreciate the reply

[@trinketsoddsandends7206]

Hello how long is a lighter filled full of gas of this type(closed tank) meant to last being using to light ciggerettes daily? Your the only guy who come to mind when google didnt have the answer lol! Cheers

[@DependableFlame]

There are a many factors at play but I would say typical for this type is about a week or so, maybe a bit longer. Zippos seem to be about 3-5 days, maybe a week. Table lighters usually get the best fuel efficiency.✌️

[@trinketsoddsandends7206]

@@DependableFlame that was the perfect answer and how long my one lasts i just wanted to confirm it was normal.. your a true man of your craft bless you kind sir. Cheers

[@Civilwarpiper]

The never ending tapeworm.

[@DependableFlame]

😜✌️

[@zacknicley8150]

It just keeps coming.