How To Remove ZX10R Airbox

Рет қаралды 16,663

Күн бұрын

Пікірлер: 24

@thorissr Жыл бұрын

This was the most helpful video I found that was clearly laid out for me to remove my air box in order to change my spark plugs. All other videos just fast forwarded to the next step without actually showing what they did between each step. Big thanks and keep the videos coming!!

@brakes940 2 жыл бұрын

Clear and concise. Very helpful!!

@straieraswift5785 Жыл бұрын

This was 3yrs ago. It still was so helpful cause I'm doing this now.

@vicfox101 5 жыл бұрын

you got a video on how to mod your airbox for better intake velocity?

@wildwhiskeywolf 5 жыл бұрын

No, but I should make one!!

@vxe6vxe6 Ай бұрын

I removed all of those clips, brackets and the rubber engine condom. I also flipped the airbox clamps so the bolts faces outward. No need to remove all of the stuff behind the airbox to get to them.

@erikvanderlip4260 3 жыл бұрын

Thanks for a awesome video. What size is the ball allen for loosening the hose clamps on the throttle bodies to remove the airbox?

@deese6634060 Жыл бұрын

I know this is late but if it helps anyone else it's a 5mm

@J117-x7l 13 күн бұрын

Do you have to disconnect the battery for this?

@GR8WHITEC5 3 жыл бұрын

If I ever need to remove my airbox, I'll hit you up. : )

@GMurph-yu3pd Жыл бұрын

I noticed some oil leaking down the left side of my 2016 zx10r, took it apart and the airbox has oil primary along the bottom left where the crank vent enters and there's no drain hose attached to the airbox for the oil to go into, just a hole for it to run down the left side of the bike. Oil level is right at the full line in the sight so its not overfilled. I noticed the oil after doing some top speed runs, is it possible the high rpms of the engine for a long period of time pushed some of the oil from the crank into the airbox and overtime without me knowing to empty the line, caused it to blow the hose off, leaving just a the hole for it to run down the bike? Thanks

@darkone6030 2 жыл бұрын

I just removed the tank and air box to install an HM quickshifter on my zx10r, and put everything back together making sure it was all done perfectly, but now even though the bike starts, it idles rough and stalls sometimes. Do you know what could be causing this? Thanks in advance.

@gcr28 3 жыл бұрын

Thank you, good tutorial.

@marcoliocops Жыл бұрын

How often does Kawasaki expect air element to replaced?

@booger65man 4 жыл бұрын

Thanks for these videos.

@wildwhiskeywolf 4 жыл бұрын

Thanks for the feedback! So much more in the works

@booger65man 4 жыл бұрын

@@wildwhiskeywolf I recently purchased a ZX10 and have been making several mods. Your videos saved me a lot of time and headache when it comes to disassembly. I like that you take the time to show each step regardless of how trivial.

@straieraswift5785 Жыл бұрын

Bro. I'm have way there. What about removing the spark plugs video.