How To: Removing Your Onewheel GT Controller Module

Рет қаралды 3,113

FixMyPEV

Күн бұрын

Пікірлер

@followdon Жыл бұрын

Thanks for doing what you do, Justin!

@fixmypev 10 ай бұрын

Thanks for the support, Don! Love your channel! 🤙🏼⚡️🖤

@BeeStone-op1nc 7 ай бұрын

Is there an order to plug the cables back in?

@fixmypev 7 ай бұрын

My preference is to plug in the data connector, headlight connector, and power button connector (any order) followed by the controller XT60. Make sure you don’t press the power button prior to connecting the controller XT60.

@Fireoutside911 Жыл бұрын

Great video! My GT seems to have bricked after a wheelslip. The only hint of life, is a faint single beep from the controller module when attempting to power it on. Think disconnecting and reconning the controller module may do the trick? Thanks man

@fixmypev Жыл бұрын

Ouch. Sorry to hear that. This has been being reported far too commonly lately. If your board is still under warranty, I suggest contacting Future Motion. support.onewheel.com/hc/en-us/requests/new

@thorphysique 7 ай бұрын

hey @fireoutside, I'm having the same exact problem like you had. The same faint single beep happens everytime I click the power button but no signs of life coming to the board. Have you come to a solution to this problem? Thank you so much

@seanbeinert9772 4 ай бұрын

Did you figure out what it was? Mine just did the same thing

@seanbeinert9772 4 ай бұрын

Hey, mine did the same thing.. it’s definitely out of warranty. Is that a sign of a bad bms?

@mnt512 Жыл бұрын

Onewheel just sent me a bill for my GT TONIGHT, said the controller module was not performing up to specifications. Does this mean that entire thing was bad? The GT died and would not turn back on.

@fixmypev Жыл бұрын

Future Motion generally replaces the entire controller because it’s easier/faster than doing the component-level troubleshooting and repairs (I would too if I had an endless number of replacements available haha).

@nicholaswolle 8 ай бұрын

Thanks for this, might need to send mine somewhere to downgrade firmware so I can relevel for my WTF’s… bought it new with update already on it. Are there any versions of GT that can’t be downgraded?

@fixmypev 8 ай бұрын

Haven’t found any yet, but that could easily change with new hardware revisions (if incompatible with 6109). What’s your hardware version?

@jb-fh2og 8 ай бұрын

do you know if there is a 12v header on the board so i can add a gps tracker inside the control module

@fixmypev 8 ай бұрын

Not sure. Haven’t checked for that before. Worth exploring though. 💯

@beazkneez 11 ай бұрын

My one wheel GT ping pong itself against two concrete walls at the skate park and doesn't turn on. is it possible that a connector inside the controller became disconnected. there is no signs of life no lights nothing I have just ordered the t20 security torques bit to open it up to see if anything looks out of place. The only other thing I could think of is maybe the BMS got disconnected but is that something that happens often. anything would help thank you.

@fixmypev 10 ай бұрын

Sorry to hear that! It’s definitely possible something could have disconnected. Or worse. Any updates?

@paulkay5553 6 ай бұрын

Hi I’m in the UK is it possible to fix my GT if I sent it to you it won’t power on nothing no lights nothing when charger is plugged in it’s only done 1000miles is there anyway of me contacting you direct ? Thanks Paul

@fixmypev 6 ай бұрын

Hey, Paul! Feel free to use my contact page: www.fixmypev.com/contact-us

@rwoodward8839 Жыл бұрын

I hope I never have to remove my controller but I've learned a couple of things from the video. 1. If you continually monkey around with your controller, put in a better gasket and 2. There's a new name for needle nose pliers. Good to know.

@fixmypev Жыл бұрын

Facts. The TFL Controller gasket will make your life A LOT easier. 💯

@Jameslangford-rc6sw Жыл бұрын

So let me get something straight, correct me if im wrong. Once I update, there is no way to digitally level my board OR roll back to do so and then forward again (this is excluding custom shaping tilt bc doesn't it drain the battery when your pushing it harder? Or something?)

@fixmypev 10 ай бұрын

It depends on the model of your Onewheel, but the short answer is yes. Once you update, you are no longer able to level the board or rollback using a web app like ReWheel.

@BellahWorks 11 ай бұрын

Have you discovered a pattern?, are these controller modules breaking in the same spot on multiple boards?

@fixmypev 10 ай бұрын

If by “breaking” you mean falling prey to the malicious firmware updates FM has been releasing, the answer is yes. 😬

@mittenminutes7511 Жыл бұрын

Is this the same process for the pint?

@fixmypev 10 ай бұрын

Yes. The process is nearly identical on the Pint.

@jeremyshearer Жыл бұрын

You can leave the ST link inside ?

@fixmypev Жыл бұрын

Not the ST-Link, but the wires. 🤙🏼⚡️💯

@CayoticProphet Жыл бұрын

6:37 Content Creator Feedback: It was at this moment, just before suggesting I stick around for the tedious process of removing screws, I moved my mouse to the timeline bar. Then virtual you said off camera, "just increase the speed to 1.5%." This is a note to self, you can always instruct the audience, "Press the 'Shift plus greater than symbol' to speed this part up, then the 'lesser alligator symbol' to slow the video back down, if I end up talking to fast. If you are viewing on mobile, click the cog!"