How to renew the cartridge in a single lever mixer tap

  Рет қаралды 177,196

dereton33

dereton33

Күн бұрын

Пікірлер: 224
@cmcauley26
@cmcauley26 4 жыл бұрын
Al, just wanted to say that you're a star and a lifesaver all rolled into one. I'm sure I speak for the majority on here in saying that your videos have got us all out of a few sticky situations. The least I can do is say thank you, much appreciated and keep up the good work. I watch all your videos regardless if I have that problem or not. All very informative. Thank you.
@dereton33
@dereton33 4 жыл бұрын
You are very welcome. Thanks for your very kind comments, I am not much of a star really, just an ordinary guy, that`s all.
@bodonicated
@bodonicated 2 жыл бұрын
Really appreciate you doing this video. Loving your style and explanations- cheers.
@nigelgraham8890
@nigelgraham8890 17 күн бұрын
Never stop doing this. So many people are grateful.
@kubaale
@kubaale Жыл бұрын
I watched other videos, but by far, this was the one that really helped me clearly, and I succeeded. Thanks from Montreal, Canada.
@dereton33
@dereton33 Жыл бұрын
Great to hear!
@HammerRocks
@HammerRocks 3 жыл бұрын
This is perfect. Great guide. My current home has a gooseneck style mixer tap on my kitchen sink and I've never replaced a washer (or cartridge) on these types of taps before, thus I didn't know where the washer was located. I didn't even know in these types of taps they're called "cartridge". Your video has given me a good guide on where to start. Thanks for making this video.
@dereton33
@dereton33 3 жыл бұрын
Glad it was helpful!
@daganagdaganagian3132
@daganagdaganagian3132 2 жыл бұрын
Finally someone is posting a detailed, well explanation , useful,video Thank you thank you 🙏
@dereton33
@dereton33 2 жыл бұрын
You are welcome!
@DarrenGlen
@DarrenGlen 3 жыл бұрын
Thank you ! i stared at our little water filter tap for days trying to figure this out. It didnt have the little grub cover it was sealed there, but i finally figured out that you unscrew the little stick handle and hidden behind it is the allen key grub screw which dis-assembled the whole thing like you then show. You got me started with this vid thanks again! legend!
@dereton33
@dereton33 3 жыл бұрын
No problem Darren.
@ChrisAddicott
@ChrisAddicott 2 жыл бұрын
Thank you for this video which completely demystified how these taps work. I followed your directions and was able to replace the faulty cartridge with a new one from my local hardware store.
@dereton33
@dereton33 2 жыл бұрын
Great 👍
@gregparaan6033
@gregparaan6033 2 ай бұрын
Thank you for showing how to remove the shroud, it looked like it was part of the tap itself. All the best!
@dereton33
@dereton33 2 ай бұрын
You're welcome!
@onettleton
@onettleton 2 жыл бұрын
Thanks for taking the time to put these videos together, they've really helped me out doing our house up in recent weeks.
@dereton33
@dereton33 2 жыл бұрын
Great to hear!
@raymondlobo2473
@raymondlobo2473 3 жыл бұрын
Well done dear. So professional, and still presented in such a friendly and down to earth manner. I learnt to now fix these types of kitchen taps. God bless you and your family. Raymond Lobo
@dereton33
@dereton33 3 жыл бұрын
Thank you so much 😊
@anitagoswami1089
@anitagoswami1089 2 жыл бұрын
Thank you so much for giving us such useful information. I had my tap leaking for months and couldn't figure how to fix it. I knew it needed a washer replacement but didn't know how to access it. Because of your this video I fixed it in 10 minutes. Thanks a bunch 👍🏼
@dereton33
@dereton33 2 жыл бұрын
You're welcome!
@delsurmusic
@delsurmusic Жыл бұрын
Thanks to your video I was able to fix the faucet, thank you very much for sharing, your time and knowledge!
@dereton33
@dereton33 Жыл бұрын
You're welcome!
@wrybread
@wrybread 3 жыл бұрын
Thank you from San Francisco! The lever on our kitchen sink faucet gradually became super stiff to the point that I was considering extending the lever, ha. Then I found your video so I opened it up and removed the cartridge and put it back in and now somehow without me having done much the faucet works perfectly again. I don't know exactly why but I'll take it! And thanks again! And for anyone else coming this way, the allen screw wasn't visible for me, it was pointed straight down. I just tried different allen keys until I found the right one by feel. It was either the 2mm or 2.5mm allen key that did it.
@dereton33
@dereton33 3 жыл бұрын
Visited San Francisco back in 2018, loved it there.
@smithr179
@smithr179 7 ай бұрын
You are a star. Huge thanks for a really clear easy to follow video. Much appreciated 😊
@dereton33
@dereton33 7 ай бұрын
Thanks for watching!
@nileshdesai6138
@nileshdesai6138 4 жыл бұрын
Thank you so much for this video, you not only saved me so much money but learnt an extra skill.
@dereton33
@dereton33 4 жыл бұрын
You are welcome!
@didil6595
@didil6595 22 күн бұрын
This is the only video i found that taught how to remove the shroud.
@dereton33
@dereton33 22 күн бұрын
No problem.
@mikeroberts8412
@mikeroberts8412 Жыл бұрын
Thanks for taking the time to put this together, very useful, cheers
@dereton33
@dereton33 Жыл бұрын
No worries!
@peterlavercombe9355
@peterlavercombe9355 3 жыл бұрын
Thanks mate! I thought it was going to be a big job but you made me feel confident enough to do the job.
@dereton33
@dereton33 3 жыл бұрын
No problem
@emilysmith764
@emilysmith764 3 жыл бұрын
Thank you so much! I was a bit nervous for my first time pulling apart a tap but you laid it out very simply!
@dereton33
@dereton33 3 жыл бұрын
You're so welcome!
@damionbaines4843
@damionbaines4843 3 жыл бұрын
Tap is working again, thanks for taking the time to post.
@dereton33
@dereton33 3 жыл бұрын
No problem 👍
@supergran62
@supergran62 3 жыл бұрын
Awesome. Thanks for the help. Managed to do it all by myself. Saved a plumber call out. 🙃
@dereton33
@dereton33 3 жыл бұрын
Great job!
@johnbassett5407
@johnbassett5407 2 жыл бұрын
Thanks for sharing. I notice you don't use any plumbers tape on the locking nut. My tap leeks at the lever, I'm just wondering if that's the problem or that the cartridge locking nut has not been tightened enough.
@dereton33
@dereton33 2 жыл бұрын
Do try it it, normally does nothing.
@sunkat76
@sunkat76 Жыл бұрын
Hell. nice video. Thank you. Is this the Jeroni Swan tap by Pegler? Looks very similar. Our's is and it is dripping from half way down where the neck screws into the mount. It was a push fit and wasn't right from the minute the plumber fitted it. If I could I would take out the Blanco sink that comes with a pre-drilled 35mm hole and put in plain pillar separate taps. noithing wrong with the sink but there is not enough room to drill holes in it.
@dereton33
@dereton33 Жыл бұрын
Maybe get a new sink top capable of putting in the pillar taps. Worth it in the long run. Pillar taps are far better.
@sunkat76
@sunkat76 Жыл бұрын
@@dereton33 Thank you so much! I think I will go for the compression type as I hear they are better than ceramic cartridges.
@Autonomous1969
@Autonomous1969 Ай бұрын
Mine is the same as yours but there is no grub screw underneath or under the plastic hot/cold button. The handle will not unscrew as it's welded on. I'm baffled.
@dereton33
@dereton33 Ай бұрын
Some do not come off. Try tapping the handle upwards with a small hammer it may just be stuck with limescale.
@barbarafeltham2588
@barbarafeltham2588 2 жыл бұрын
Thank you so much! I'm now willing to have a go at changing the cartridge myself!
@dereton33
@dereton33 2 жыл бұрын
Go for it!
@AbidHussain-kz9ts
@AbidHussain-kz9ts 4 жыл бұрын
Our tap is identical to the one on your video - but it doesn't have the pop out thing where the Allen key fits!
@dereton33
@dereton33 4 жыл бұрын
Check for a hidden one, or you can try just levering it off.
@pauljackson9519
@pauljackson9519 Жыл бұрын
I have a single lever mixer tap. It's not dripping. It seems to be working well. However, when I turn the hot water valve off, some cold water still comes out of the hot side. And when I turn the cold water valve off, some hot water still comes out of the cold side. Not much, but some. Is that normal? Or is the mixer valve supposed to completely separate hot and cold? In other words, with the cold water valve shut off, should there be no water whatsoever coming out of the cold side?
@dereton33
@dereton33 Жыл бұрын
There should be nothing. The cartridge is faulty.
@pauljackson9519
@pauljackson9519 Жыл бұрын
@@dereton33 thanks very much. I'll take a look at it now. The frustrating thing is that the tap and sink were just replaced a few months ago. I guess the cartridge was faulty, or maybe they installed it wrong.
@coppingtonfarnham7731
@coppingtonfarnham7731 2 жыл бұрын
I was going to change the cartridge on my Mirabelle Ravenel, with cartridge MIR507348N because of dripping. There is not much clearance with the sort-of ball joint and handle that rotates on it, so crud like limescale and food crud can build-up in that area, preventing complete closure of the handle. I doused the area with glass cleaner and wiped 4-5 times, and the handle was able to close more tightly and that eliminated the dripping. This is an excellent video if in fact the cartridge needs changing.
@dereton33
@dereton33 2 жыл бұрын
Thanks for the info.
@macweasylistening
@macweasylistening Жыл бұрын
Great video. I notice it is a VIMMERN Tap from IKEA. Does anyone know the specifications of a replacement cartridge, it's not on the IKEA website as far as I can see.
@dereton33
@dereton33 Жыл бұрын
Sorry can't help you.
@richy2k1
@richy2k1 2 жыл бұрын
Hi there,I have a tap similar to this except the spout looks like a spring/slinky and can be moved about as a spray. Water has begun spraying out of the bit where the spout meets the solid section shown in this video. Do you happen to have any advice or videos on how to fix this? I can’t find any way to open the tap up to see inside. The model isn’t clear but it looks like the Deva Slinky 118. Thanks a lot
@dereton33
@dereton33 2 жыл бұрын
I do have a video somewhere on my channel. It might not be your tap though.
@stevenrobinson5284
@stevenrobinson5284 2 жыл бұрын
Hi my tap has no grub screw for the actual lever .. do you have any ideas.. Please an thank you..
@dereton33
@dereton33 2 жыл бұрын
They may be just pull off ones .Tap gently with a hammer.
@shaunmcgee4204
@shaunmcgee4204 10 ай бұрын
Hi Dereton33, I replaced the dripping cartridge in my single lever mixer tap as per instructions, but I’m afraid the drip is still happening. Do you think I will need to replace the entire tap please? Thanks in advance.
@dereton33
@dereton33 10 ай бұрын
Hi Shaun, yes if it has not cured the drip then a new tap is the only answer.
@shaunmcgee4204
@shaunmcgee4204 10 ай бұрын
@@dereton33 Thanks for letting me know, much appreciated.
@peterdavies7987
@peterdavies7987 Жыл бұрын
I see you turned the mains off - this is the cold water feed of course. But what about the hot ? I have a similar Hansgrohe tap.
@dereton33
@dereton33 Жыл бұрын
If you have a combi boiler then the hot goes off as well. I f you have an F and E system then you will have to turn off the cold feed to the cylinder. Normally a red handle gate valve next to the cylinder.
@Hoobel
@Hoobel 2 жыл бұрын
My cartridge is the exact same in the video. What is it called and where to buy please? UK
@dereton33
@dereton33 2 жыл бұрын
It is just called a tap cartridge. Amazon or Ebay do them.
@chocablock
@chocablock 8 ай бұрын
Hi - we have a smeg imola single lever tap and after the little screw is removed the actual lever at the side of the tap will not budge. Can you please help?
@dereton33
@dereton33 8 ай бұрын
Spray with WD 40 then give it a tap with a light hammer in the direction it comes off.
@chocablock
@chocablock 7 ай бұрын
@@dereton33 thank you very much x
@silverfox_94
@silverfox_94 3 жыл бұрын
Thanks for the vid - have successfully swapped out the cartridge following a leak however, I'm still getting a slight leak. I've tightened the retaining nut but to no avail. Any advice from the group very welcome.
@dereton33
@dereton33 3 жыл бұрын
Some times you just have to give in and get new taps.
@silverfox_94
@silverfox_94 3 жыл бұрын
@@dereton33 thanks for the reply - agreed. That will be my next action 👍
@carlton24801000
@carlton24801000 6 ай бұрын
Is that your earth wire connected to your plumbing?
@dereton33
@dereton33 6 ай бұрын
Yes.
@iheggis86
@iheggis86 3 жыл бұрын
I have a two spout, two handled three way mixer tap (hot cold & filtered cold) (filtered cold comes out small spout, hot & cold flows through large mixer spout) when I turn on any of the taps a small stream of water comes out the opposing spout. Would replacing the cartridge fix this?
@dereton33
@dereton33 3 жыл бұрын
Not always, but cheapest option.
@oli230
@oli230 Жыл бұрын
My tap needs sorting, its gone stiff I cant change from hot to cold easily, rather than leaking but this was helpful. I might get away with some lubrication perhaps but if not its a new cartridge if i can get one. Thank you for your wonderful video.
@dereton33
@dereton33 Жыл бұрын
Glad it helped
@kylepnd
@kylepnd 3 жыл бұрын
Legend. Definitely saved myself money for this one.
@dereton33
@dereton33 3 жыл бұрын
That`s great.
@sali6120
@sali6120 2 жыл бұрын
How do you tighten the mixer tap that has 2 levers on each side cold and hot. The lever is loose…. HELP!
@dereton33
@dereton33 2 жыл бұрын
Should be a hidden screw under a chrome cover to tighten it.
@geoffreybroom2645
@geoffreybroom2645 4 жыл бұрын
Am I right in thinking that turning the mains water off won’t stop the hot feed to the tap if you have a hot water storage tank fed from the cold storage tank in the loft, unless the cold tank is run dry?
@dereton33
@dereton33 4 жыл бұрын
Yes that`s correct.
@geoffreybroom2645
@geoffreybroom2645 4 жыл бұрын
dereton33 Enjoy the Bank Holiday. Hope it’s not been too busy in Dawlish over the last few weeks.
@stevemartin2992
@stevemartin2992 4 жыл бұрын
Hi ace video but can i ask i have similar tap which is leaking but i have no screw to undo to remove the outer casing any idea's ?
@dereton33
@dereton33 4 жыл бұрын
They may just pull off, some do not have screws, also try turning them in case they are threaded on.
@elmernovak2203
@elmernovak2203 2 жыл бұрын
Thank you for all the information you were very thorough and quick
@dereton33
@dereton33 2 жыл бұрын
No problem.
@sbachm
@sbachm 3 жыл бұрын
I agree with comments below....it was a big help to me. My tap was extremely similar to the one in the demo, so it was perfect for me.
@dereton33
@dereton33 3 жыл бұрын
Great.
@LittleBear090610
@LittleBear090610 3 жыл бұрын
Thank you so much! You saved us a bundle on a plumber!
@dereton33
@dereton33 3 жыл бұрын
You are welcome!
@jguk2597
@jguk2597 2 жыл бұрын
My tap hasn’t got a grub screw!! Any ideas?
@dereton33
@dereton33 2 жыл бұрын
Pull up the top as hard as you can.
@khanimania
@khanimania 2 жыл бұрын
Thxx this tap was giving a pain, found ur video tht solve the issue. Thzz
@dereton33
@dereton33 2 жыл бұрын
No problem.
@aslamparvez2156
@aslamparvez2156 4 жыл бұрын
My tap doesn't have the screw at the bottom on the lever... How would you take of the section??
@dereton33
@dereton33 4 жыл бұрын
Some do not come apart at all. Yours could be a pull off one, if it wont come off then its fixed.
@evieemaya88
@evieemaya88 3 жыл бұрын
Great video. How do you rate this tap, seems like you had to change the cartridge after a year of owning? Do you recommend.it or would you have bought another brand now in hindsight? Thanks
@dereton33
@dereton33 3 жыл бұрын
It is still performing well, I did not have to change the cartridge in this tap I was just using it as a demo on how to do it. There was nothing wrong with it.
@GaryBeck-b7o
@GaryBeck-b7o Жыл бұрын
What size is the Allen wrench?
@dereton33
@dereton33 Жыл бұрын
2 mm . There are all different for every make of tap so it might not fit yours. Best get a small set.
@nayandave2651
@nayandave2651 2 жыл бұрын
I've got the exact same tap and the hot water doesn't run on, so I'll try the cartridge first thanks to this video.
@dereton33
@dereton33 2 жыл бұрын
No problem.
@rabmcgregor3557
@rabmcgregor3557 3 жыл бұрын
Found your video and thought it's not as complex as I first thought, but on closer inspection the little plug to give you access to the Allen screw holding the lever on is non existent in my tap?? Back to the drawing board for me but when I do finally get inside I won't be worried by what I find now thanks for the video 👍
@dereton33
@dereton33 3 жыл бұрын
Some are just pull off, others the top may be fixed, with no way off.
@rabmcgregor3557
@rabmcgregor3557 3 жыл бұрын
@@dereton33 be just my luck to pull it and find it's fixed and I've ripped my tap in two
@wollywotsit
@wollywotsit 4 жыл бұрын
Al I coming down your way for a holiday in 2 weeks with a toddler, any recommendations of nice places? When can we drop toddler off for jan to baby sit
@dereton33
@dereton33 4 жыл бұрын
I think you might find Jan will suddenly be working or something, ha ha. Tegnmouth right around to Brixham is all really nice.
@myvoice007
@myvoice007 3 жыл бұрын
Our tap is quite similar and was confused how to take it apart. Thanks for this
@dereton33
@dereton33 3 жыл бұрын
You're welcome!
@bandzzzz4s
@bandzzzz4s Жыл бұрын
My little white thing inside is broken what should I do
@dereton33
@dereton33 Жыл бұрын
Get a new cartridge.
@bandzzzz4s
@bandzzzz4s Жыл бұрын
@@dereton33 so I don't have to replace the entire faucet?
@sanjayp2683
@sanjayp2683 4 жыл бұрын
How long did the hapilife cartridge last?
@dereton33
@dereton33 4 жыл бұрын
Still going strong. 3 years now.
@sanjayp2683
@sanjayp2683 4 жыл бұрын
@@dereton33 I ordered the Bristan version, little more expensive but seems quality. Hopefully it's easy to fit. Ordered myself the tommy bars too.
@mansoorhussain1797
@mansoorhussain1797 4 жыл бұрын
The camera quality is fantastic. I hope that you are keeping well.
@dereton33
@dereton33 4 жыл бұрын
Thanks Mansoor, we are both well. Thanks for the good wishes.
@andrewfielden284
@andrewfielden284 3 жыл бұрын
Great video. Thanks for the Allen key tip. I was wondering how to get into this thing.
@dereton33
@dereton33 3 жыл бұрын
No problem 👍
@gabrielcarota1885
@gabrielcarota1885 3 жыл бұрын
Out Fix e Goose Neck it start to popup
@Batman-nz2ue
@Batman-nz2ue 3 жыл бұрын
I used 2mm allen/hex key from a set in bunnings. But I should've bought the cartridge repair kit, it comes with an allen key, also used a 30mm adjustable wrench to repair a kitchen mixer tap (I think the nut measured 28mm). Remember bois/gals, you must screw on the nut super tight, have a stream of cold water running to test as you tighten.
@dereton33
@dereton33 3 жыл бұрын
Cheers batman. Robin.
@fantasfor
@fantasfor 2 ай бұрын
My cartridge just don't come out. It is moving little bit but is stuck.
@dereton33
@dereton33 2 ай бұрын
Try some WD 40 on it.
@fantasfor
@fantasfor 2 ай бұрын
@dereton33 will do, thanks
@lomas66
@lomas66 4 жыл бұрын
You turned the cold supply off, what about the hot?
@mistermartin82
@mistermartin82 4 жыл бұрын
I think he has a combi, in which case turning off cold turns off hot too
@lomas66
@lomas66 4 жыл бұрын
OK, thanks. I have a conventional boiler and hot water cylinder so will also have to isolate the hot feed.
@dereton33
@dereton33 4 жыл бұрын
Yes you will.
@lomas66
@lomas66 4 жыл бұрын
Thanks Al, keep the pearls of wisdom coming 👍
@robertsmithshair4199
@robertsmithshair4199 Жыл бұрын
so no washer? i will need to repace the whole cartridge then...
@dereton33
@dereton33 Жыл бұрын
Yes.
@robertsmithshair4199
@robertsmithshair4199 Жыл бұрын
@@dereton33thank you. Little damage to the shroud as didn’t realise it was plastic and didn’t rewatch the video with your screwdriver technique 🤦🏻‍♂️ However this will be hidden and lesson learnt Off to get replacement hardware now- thanks so much for making this video 🙏🏻
@ratchriat1716
@ratchriat1716 4 жыл бұрын
like you said al every tap is different thanks for sharing this information with us .
@dereton33
@dereton33 4 жыл бұрын
Thanks Ratch. Keep well mate.
@pb9926
@pb9926 4 жыл бұрын
That tap will probably start dripping now Al after you've taken it apart 😁 or is it just me who has that kind of bad luck ! 👍
@dereton33
@dereton33 4 жыл бұрын
You and me both!
@loafersheffield
@loafersheffield 4 жыл бұрын
Of all the tap designs, those are the ones that I hate the most. The retaining ring hex can be so thin that when they seize up, they are really easy to crack or round off. I'd always advise to get twin head mono mixers.
@woosheroes494
@woosheroes494 4 жыл бұрын
Life saver! Much appreciated for your time and wisdom.
@dereton33
@dereton33 4 жыл бұрын
You are so welcome!
@AshwanikumarSainiARTER
@AshwanikumarSainiARTER 4 жыл бұрын
Which company tap is that?
@dereton33
@dereton33 4 жыл бұрын
Gnome
@harshilshah6630
@harshilshah6630 3 жыл бұрын
hi sir i am working on a app idea for my uni project i wanted your help if u can
@dereton33
@dereton33 3 жыл бұрын
How can I help you?
@harshilshah6630
@harshilshah6630 3 жыл бұрын
@@dereton33 Thankyou for your reply
@harshilshah6630
@harshilshah6630 3 жыл бұрын
@@dereton33 so i have an app idea which will help people and plumbers to make the the process of repair more easy with the help of smartglasses
@harshilshah6630
@harshilshah6630 3 жыл бұрын
@@dereton33 i need to talk to about the idea and how wanted your feedback on it, so how can i contact u
@jasoncox4088
@jasoncox4088 3 жыл бұрын
thanks - great insight. Now I have an idea what to expect..... I've got the cartridge/cassette, just need to find the right allen key.
@dereton33
@dereton33 3 жыл бұрын
Best of luck!
@local_authority
@local_authority Жыл бұрын
Thanks for the video mate really helpful
@dereton33
@dereton33 Жыл бұрын
No problem 👍
@MetalAlien29
@MetalAlien29 3 жыл бұрын
Excellent, tyvm for your uploaded vid, helps us out 🤘🏼
@dereton33
@dereton33 3 жыл бұрын
No problem 👍
@jeffreywood4240
@jeffreywood4240 3 жыл бұрын
The plumber wanted $50, to do this, plus parts. TRUST ME, If I can do it, ANYONE can, Ten minutes max, and most of that was figuring out the right allen wrench size. Super easy.
@dereton33
@dereton33 3 жыл бұрын
That`s great.
@desmindw
@desmindw 2 жыл бұрын
Thanks for nice clear demo
@dereton33
@dereton33 2 жыл бұрын
No problem!
@LC-qi5ff
@LC-qi5ff 4 жыл бұрын
Uber helpful. Thank you sir
@dereton33
@dereton33 4 жыл бұрын
You are welcome
@strikemaster1
@strikemaster1 7 ай бұрын
Was a whole lot simpler in the old days.
@dereton33
@dereton33 7 ай бұрын
Sure was.
@ngocmailuong140
@ngocmailuong140 11 ай бұрын
thank you very much your video very helpful
@dereton33
@dereton33 11 ай бұрын
You are welcome!
@SoulandAngels
@SoulandAngels 4 жыл бұрын
Thank you so much! I had no idea about these 😊
@dereton33
@dereton33 4 жыл бұрын
You are so welcome!
@johnnykay8261
@johnnykay8261 3 жыл бұрын
Good stuff mate job well done, cheers
@dereton33
@dereton33 3 жыл бұрын
Thanks 👍
@mda5003
@mda5003 4 жыл бұрын
So much easier and a lot cheaper when all you needed was a tap washer....
@dereton33
@dereton33 4 жыл бұрын
Yes I know, how easy was it then.
@jonnygti
@jonnygti 4 жыл бұрын
Camera upgrade? I noticed a big step up in video quality. Your other videos were always abit blurry, even when watching in HD, I didn’t want to say anything and sound rude! Now it’s spot on 👍🏻 Thanks for the video too, we’ve got the same kind of kitchen tap, got it from Aldi a few years ago, still going strong with no drips, great to know how to sort it out should it start dripping 👍🏻
@dereton33
@dereton33 4 жыл бұрын
Thanks Jonathan, yes the camera has made a huge difference every one seems to have made a comment on the new video quality.
@MrDbone75
@MrDbone75 4 жыл бұрын
Good afternoon to you sir from wellington Somerset
@dereton33
@dereton33 4 жыл бұрын
Hello there! Welcome along.
@user-xc9et7ri7n
@user-xc9et7ri7n 2 жыл бұрын
Thanks mate, big help
@dereton33
@dereton33 2 жыл бұрын
No problem 👍
@711honved
@711honved 4 жыл бұрын
I dropped a bathroom tap cartridge in descaler & flushed it through. Put it back together & the leak had stopped.
@dereton33
@dereton33 4 жыл бұрын
Thanks for the tip.
@ivindandresen7443
@ivindandresen7443 2 жыл бұрын
Great video!
@dereton33
@dereton33 2 жыл бұрын
Thanks for the visit
@RG-gt8fs
@RG-gt8fs Жыл бұрын
Thanks. Now if I can just find a replacement cartridge for an Ikea faucet.
@dereton33
@dereton33 Жыл бұрын
Good luck with that one.
@MisterMooo
@MisterMooo 4 жыл бұрын
New camera looks great
@dereton33
@dereton33 4 жыл бұрын
Thanks a good upgrade I reckon.
@jjgoldstein7310
@jjgoldstein7310 4 жыл бұрын
You’ll be able to pop some nail varnish on them thumb nails now, I wouldn’t grow them any longer.
@dereton33
@dereton33 4 жыл бұрын
Good idea my daughter is a nail technician.
@sjmcgarrie
@sjmcgarrie 4 жыл бұрын
Thank you very much fella... you are a star :-)
@dereton33
@dereton33 4 жыл бұрын
No problem 👍
@chrishunt8557
@chrishunt8557 11 ай бұрын
Top man thanks dave!
@dereton33
@dereton33 10 ай бұрын
No problem 👍
@bonypp
@bonypp 4 жыл бұрын
The best sweet guy out there .
@dereton33
@dereton33 4 жыл бұрын
Thank you.
@divisorplot
@divisorplot 3 жыл бұрын
thx the audio foreground cloud loud noisy music on moist audio an annoying health hazard signal to noise quiet on the set stills the troubled sea/see
@dereton33
@dereton33 3 жыл бұрын
No problem.
@markbaker8601
@markbaker8601 9 ай бұрын
Thanks good tip
@dereton33
@dereton33 9 ай бұрын
No problem!
@chocablock
@chocablock 8 ай бұрын
@@dereton33 Hi - we have a Smeg IMOLA single lever tap and the lever will not come off (the little screw is easily removed). We would be extremely grateful for any assistance please. Many thanks in advance x
@jasonchen7342
@jasonchen7342 2 жыл бұрын
thanks mate
@dereton33
@dereton33 2 жыл бұрын
You're welcome!
@sameer19871987
@sameer19871987 6 ай бұрын
Thank you.
@dereton33
@dereton33 6 ай бұрын
No problem.
@Turbo20qq
@Turbo20qq Жыл бұрын
Thank u...Legend
@dereton33
@dereton33 Жыл бұрын
No problem.
@sunnychowdhry
@sunnychowdhry 2 жыл бұрын
Thank you Sir
@dereton33
@dereton33 2 жыл бұрын
Most welcome
@ponymoore6140
@ponymoore6140 Жыл бұрын
Thank you
@dereton33
@dereton33 Жыл бұрын
You're welcome
@bernadinecantrick-brooks1075
@bernadinecantrick-brooks1075 3 жыл бұрын
Thanks
@dereton33
@dereton33 3 жыл бұрын
No problem
@maxfrere4871
@maxfrere4871 Жыл бұрын
Thanks m8,for that 👍👌💪❤️,Suffolk
@dereton33
@dereton33 Жыл бұрын
No problem 👍
@rajfreestylo2735
@rajfreestylo2735 2 ай бұрын
Thanks
@dereton33
@dereton33 2 ай бұрын
No problem.
How to Replace a Ceramic Cartridge 💧 Dripping Tap Fix
10:33
Skill Builder
Рет қаралды 702 М.
How to replace the cartridge in a mixer tap
11:56
Ultimate Handyman
Рет қаралды 1,8 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Replace cartridge + service single lever mixer tap
20:52
AnnMatt Erasmus
Рет қаралды 140 М.
How to Repair or Replace a Quarter Turn Ceramic Disk Tap Valve
12:04
Charlie DIYte (CharlieDIYte)
Рет қаралды 1,1 МЛН
Why does my hot water take so long to reach the tap?
12:39
dereton33
Рет қаралды 1,8 М.
Changing Sink Taps the Easy Way
6:40
Skill Builder
Рет қаралды 508 М.
Trying to FIX a LEAKING 1/4 Turn Kitchen TAP
18:56
My Mate VINCE
Рет қаралды 165 М.
How to fix a crack in a wall or ceiling - DIY
13:01
Billshowto
Рет қаралды 8 МЛН
Cut the Rope Challenge ✂️ #shorts
0:56
Mr DegrEE
Рет қаралды 9 МЛН
пранк 🤣😂😂
0:54
Numdexx1
Рет қаралды 1,5 МЛН
Непосредственно Каха
1:00
К-Media
Рет қаралды 7 МЛН