How to Repair a Dewalt DCD996 drill with slipping gears gearbox problem.

Рет қаралды 34,337

Күн бұрын

Пікірлер

@timothystevenhoward 10 ай бұрын

I just picked up a dead DCD996 cheap and I am hoping its a simple fix. I've already done a 12v Dewalt which just needed a new housing and a bit of a clean. These repairs are very satisfying!

@trippleHelixV2 Жыл бұрын

Would love to team up with you to do tear downs and engineering build overview videos! The need for repairable well built tools now in this throw away world… fell in love with your content. Thank you.

@Mark5mith Жыл бұрын

I've got the old NiCd version, that and an angle grinder, still going strong, this may help in the future as i hate throwing out good tools, thanks for your videos👍

@ianwhisson8064 3 ай бұрын

Lovely simple very clear video ... much appreciated

@Salamander6969 7 ай бұрын

Great video and you’re correct: often a fault is just one part. 👍

@georgedavall9449 8 ай бұрын

Dean Doherty !!!!!!!!!!!!!!!!!!!!!!! Crackin good Mate! 👍

@BlackenedEclipse Жыл бұрын

I’d say, as crazy as it sounds, maybe the guy using was switching gears while it was literally running, could kinda get stuck in between gears but not really a high probability with this specific build and model, great fixin

@Floppy1993 Жыл бұрын

I've the same DCD996 the chucks gone so bought a new chuck but when I was trying to get it out she keeps slipping Im assuming it's the gearbox gone now, could be something further back. Am I best chance fixing it, sending it off to get fixed or just getting a new one? It's 3 years old now and don't want to get too deep into it if it's not going to be right

@Mark5mith Жыл бұрын

Mate, I've got a Makita drill that's been used for over eight years and a wee DeWalt impact driver that's been going for about six, you're probably having the same issue as here, parts wear out.

@NCchance 2 ай бұрын

I don't expect a response, but in case you're available I'll ask a question. During the tear down did you happen to find 5 pins under the clutch assembly? I've got a 998 with what definitely appears to be 996 guts. I found those pins in mine.

@junlingyin7967 10 ай бұрын

Hi Dean, Really appreciate your video, quick question for you: I have the same drill after I opened it dropped off 5 bearing beads, do you know where they are original installed ? Thanks, Jason

@crackerjack3359 5 ай бұрын

Thanks a bunch. Perfect.

@jimtasss1 11 ай бұрын

That cable goes down the gears how it make the system to locked when its stop?

@joebeeston1995 2 ай бұрын

What grease did you use, please?

@joebeeston1995 Ай бұрын

I just used LM grease in the end. So far so good!

@emilioescobedo3024 Ай бұрын

Where did you get parts?

@joeblinko737 11 ай бұрын

Thank you for this

@jankizkhanz 9 ай бұрын

Hello any idea why my chuck knob became stiff when I try to tighten it ?

@Dave-thorfinn 11 ай бұрын

I took mine apart and it had a good amount of old grease. I wiped alot of it out. I put enough new grease back to cover all gears.

@brunolopez3721 7 ай бұрын

I guess this happens when you leave the selector in between 1 and 2, I've seen some of my colleagues do this and not even realize, it makes a terrible sound when it's stuck in between gears. Am I right?

@mrm5515 Жыл бұрын

Thank you very much, very detailed! Can you tell me which of those parts is responsible for the hammer function? Dewalt wants me to pay $99.00 plus shipping to fix mine.....you know....the one that was sold to me 14 months ago with "lifetime" warranty.

@geneo1976 9 ай бұрын

DeWalt does not carry a lifetime warranty. Maybe a kid at Lowes told you that.