Do NOT hold the valve "with your hand" while you tighten the nuts back on. As you can even see in the video, the whole valve starts twisting in the wall while he does this. This is a risky thing to do and can break off the valve pipe inside a wall, or just cause it to start leaking inside a wall (where you won't know it until it causes water damage). Hold onto the valve body with a pipe wrench or channelock pliers so you can really get a good firm grip on it and prevent it from twisting while you tighten the nuts. Otherwise... nice video. Clear and informative.
@cdrive57573 жыл бұрын
Thanks for posting that. It saved me the trouble of posting the same warning. It needs to be *Pinned*!
@phillyman50003 жыл бұрын
I just used a little motorcycle oil to help loosen the assembly piece and it worked. Must have been rusted cause it was hard to pry loose. :)
@simplelifewithlyn3 жыл бұрын
will need to try fixing my faucet myself since my husband couldn't find time to do it. might even take a video of it and put it up in my channel. wish me luck. thanks for this awesome video. God Bless!
@bha66912 жыл бұрын
did it work were you able to fix it i got do mine and I girl too
@OriginalWhiteDevil2 жыл бұрын
Well it's 2022. Why are you waiting for a man to fix something? If it's broken fix it.
@TNBlackTieGuy2 жыл бұрын
Concise and to the point. Thank you.
@dc17412 жыл бұрын
2:40. "While holding the valve with your hand..." Strong guy. I'd hold it with a pipe wrench instead (the smallest that can do the job). Same thing at 0:19 and 0:41.
@veggiepowered2 жыл бұрын
I'am Your Newest Subscriber Great Videos
@djmexdothan53723 жыл бұрын
Excellent video !!👏👏👏👏👏👏
@rosahubbard30804 жыл бұрын
thank you !
@ritac5605 жыл бұрын
Thank you at work
@elsteel71076 жыл бұрын
Yep, it just took one turn with the wrench. Thanks.
@dvcsub5 жыл бұрын
el steel same here
@pland993 жыл бұрын
Screw holding washer in should have pipe dope or never seize on threads,no screw looks that pretty after years of use!
@smartt Жыл бұрын
I can’t get faucet handle off.
@phillyman50003 жыл бұрын
What do I do when the value assembly piece is not coming loose? Mine must be rusted because it is not budging at all. How can I get it to loosen?
@cdrive57573 жыл бұрын
With water supply shut off and valve fully open you can try heating the valve with a Propane Torch. You probably want to replace it with a Brass model anyway.
@phillyman50003 жыл бұрын
@@cdrive5757 Thanks for the advice!!! I'd probably burn my house down! LOL I contacted the mfr, NIBCO and they sent me a new part. Seems to not be leaking now. I noticed that the smaller nut right underneath the round on/off metal knob(your knob is red in the picture here) should not be overtightened. Seems to drip if that smaller nut is overtightened, so I hand tightened the small nut and then turned the metal on/off knob tight and it seems to not be leaking. Never realized how these outdoor spigots could be so sensitive.
@cdrive57573 жыл бұрын
@@phillyman5000 Ira, I certainly don't want you to do that burn your house down. Advancements made in electronics technology in the last 50 years have been astounding, yet that valve design patent dates back to the 18 hundreds! Good luck my friend. Chris