How to repair a Kitchenaid Artisan Mixers that runs but is not turning the beater.

[@emersonbiggens1502]

Dont know how I came across this video, but i learned WHY they would put a platic gear in there. Makes sense now. Great job.

[@elrobo3568]

I have rebuilt a number of these units and have found that there are two ways that most often leads to this repair. One is getting a spatula or other item in the bowl while mixing that locks the beater second most people never put some veggie oil on the accessories drive shafts like a grinder and they bind up and stall the drive. You are right this gear is made to fail and save the motor. Very well built mixer, I have three and used them for my restaurant.

[@peterford9369]

Yes they are well built and expensive.

[@TheC238]

2 time damaged on three times of use 🤔 i cant understand why

[@maru.rdz6]

Can u help me please ? I'm struggling with this part I mean I bought the new worm drive and put on it but once I close all the machine and try to turn on that didn't happen and I don't know why 😭😭😭😭

[@royfrancis8935]

​@@maru.rdz6make sure you have put the brushes back in the correct way, the angled edge must be inserted into the position that has a 'wedge' at the bottom of the hole which is difficult to see, this stops the brushes from going in all the way and then does not make contact with the rotor

[@RAKINAUS]

Nice work Dean, love your video work. I've been a mechanic for 55. Yrs. The very first machine I ever worked on when I was about 10yrs old was one of these and it was that gear! It was my mum's machine. You brought some very strong memories back for me, thank you.

[@Ali.rahmani-jn9ux]

سلام واقعا استاد ماهری است کارش را دوست دارم تعمیر کار باانصاف ، دقیق وبا نظم وتمیز کار می باشد.

[@stevenwilgus8982]

Quality uses sacrificial to protect. Perfect example of such and yes cost some money to repair, but note she's back in service for years more. No landfill. Well done sir, I subscribed.

[@deandohertygreaser]

Well said!

[@MoGanoooo]

Thank you for the video! I was able to order parts and repair my mixer within four days of failure thanks to your clear and informative directions

[@1Irvinv]

thank you for this from Southern California. My wife uses this model and i've been wanting to fix her lever for her since it wont switch off easily now with this video i can take it apart and put it back together for her since she uses it almost every day.

[@edwardlogan267]

You are the man! Best tool technician I've seen on youtube!!

[@1ofakind2011]

Found a kitchenaid at goodwill today worked fine but sounded like something was wrong. For the 20$ I could not pass this beauty up. Took it home and guess what just like your video the wheel grind was shot. Ordered replacement and hope it makes it perfect!!! Thank you for the step by step guide of taking apart and putting together. This made it so easy and efficient. 😊

[@timothyedmiston8756]

Thanks for the education on how to fix the KitchenAid. I truly learned something that I did not know. And you just proved that we are part of a throwaway society that was a simple repair and it makes perfect sense that that gear would be plastic so that it would break first before the rest.

[@dvig3261]

God work, boss! One bit of advice I'd say is when putting several screws to attach something, get all the screws put in before tightening any of them..i see young guys put tension on bolts of motors or such, then struggle to get the rest started.

[@crappy60]

At least the brushes are serviceable as well. This was really helpful because I’ve watched some tutorials where people just cake the grease on, this was very informative as the adage goes “less is more”.

[@tomtomhall]

Thank you so much for this video. Following your great instructions I’ve been able to get my kitchenaid going again :-)

[@farmerbrown3768]

I got my wife a KitchenAid mixer for her Christmas 40+ years ago, gets used nearly everyday since. Maybe I should get that gear for standby as it has not failed since new!

[@davidhargrove1648]

Nice informative video. I’m glad he mentioned using food safe gear grease. Using the proper grease is actually very important. I once learned this repairing gears on a commercial kitchen grinder and used gear oil. It was too light weight and ended up seeping into the motor bearings and seizing them.

[@gizzyguzzi]

Doesn't really matter what kind of grease you use if you pay attention and stop using it if / when it starts leaking. Some of the 'food grade' grease is crap and breaks down quickly and it's not exactly anything I want to eat. The grease is supposed to stay in the machine, then it won't bloody matter will it?

[@seamusellis1450]

Food safe grease is only for the planet hub...high temperature lithium grease is best for the gearbox

[@philliphoward7455]

Thanks for the informative video. My wife has an identical mixer ( except for color ), to the one you feature. She has used it for years but I know the end will come. Now I know what to do when it does.

[@mikem2183]

You had some really good insight, anyone who fixes things automatically thinks planned obsolescence. But its really just a safety measure to help protect all the other gears, im sure someone makes a metal replacement for those who want longevity.

[@leeberry9666]

Good video Dean. Nice to see you repairing something completely different from the norm.

[@Allen-z6n]

Thanks for the post. Nice work. I was glad to find it. When fixing mine I realized that the black screws on the side holding the motor brushes don’t have to be removed. It avoids screwing up when putting them back in like I did and thought the motor was dead.

[@robhik]

Great video, clear & straightforward.

[@jakibarnes5598]

Thank you for doing this tutorial we will be fixing ours this weekend just ordered the parts

[@lazyboyrider4607]

Great video! I will start the repair on my mixer tomorrow. Thanks so much for demonstrating this repair. God bless.

[@jasonbuckler190]

I think you just gave me an idea as to what's wrong with my wife's competitor model. Thanks for the insight, great work!

[@shatin2008]

It’s enjoyable to watch and learn from your videos. Thank you Dean.

[@cloversniffs6884]

Awesome - Rock’n a Casio watch too lol. Thanks for the video.

[@ronmartinez2766]

thank you! Saved me a lot of frustration and anger. Mine stripped out at the first use; now I know that it was through my own fault...some of the meat I was grinding was still somewhat frozen. Yea, stupid; I know. At least now I know I can fix it. Thanks again!

[@deandohertygreaser]

Any time

[@jorgepucay1648]

​@@deandohertygreaser Amigo mi batidora gira pero se escucha ruidos extraños , será que le falta lubricación?

[@mariecabaneshucamis]

love how you really scrape off those old grease and keep it nice and clean👍

[@strummer6642]

"Fan of the green" Lol, loving it

[@deandohertygreaser]

me to

[@wendydearn9851]

Fantastic video, so professional. Have a kitchenaid but think may get a professional to look at her. Can imagine losing most screws or forgetting where parts go back 😅😅

[@MrDmorgan52]

Glad to know it's not a big deal if or when my wife's gear strips...her mixer gear!!

[@giorgiomoretto6392]

Bella riparazione anche io ho cominciato come riparatore in assistenza elettrodomestici braun krupps 40 anni fa capitava anche all epoca ma i materiali erano molto piu robusti di oggi❤❤

[@RonLoomis]

A very informative and well shot video, exceptionally well done. Thank you for your effort and time!

[@Tzuriah]

I really like this mixer…..fabulous green! Thx for the video. Very informative.

[@deandohertygreaser]

Thanks for watching!. i like this colour also. wouldn't mind getting one myself.

[@established_1803]

built in my home state of ohio, USA. kinda country so its nice you folks work on stuff like we do and fix ourselves instead of sendin it in for service

[@luizurol8598]

Congratulations! Nice job and helped me a lot

[@MM-fq9gi]

My Kitchen aid mixer was in storage for 25 years, it wouldn't run, turned out the the brushes were stuck and had corrosion where it had sat at the commutator. Once that was corrected, it worked fine, I went through the governor speed adjustment and put new grease in it.

[@andrewhorsburgh2549]

I find it is rather absorbing watching you work.

[@haroldoribeirogomes7103]

It's why this machine is so expensive. Very well designed.

[@robertknight4672]

These KitchenAid mixers were originally designed Buy Hobart the company that makes all the big commercial mixers with they use in bakeries in restaurants. Everything they made was designed to be serviced.

[@rinotutu]

thank you very much for your tutorial it allowed me to repair my machine

[@alexsebov5866]

Дякую, колега!!! Ваше відео допомогло у нашій роботі!

[@walter.bellini]

Thank you for the very helpful video!

[@LeroyMarshall-o8j]

Thank you, you made the repair easy, You are a greAt tech.

[@ileanamillan3040]

Enjoyed your video, you made it look so easy.❤

[@AltimaNEO]

My old one broke like this ages ago. Fixed it a long time ago and gave it to my parents

[@bigbadsubaru]

I've got a vintage one I have to fix, not sure of the exact age but it's a Hobart-made one, and by the speed control on it, it's pre-1979, Goodwill score lol

[@gregorypierce6703]

Great fix and awesome video

[@giovannit.533]

Put extra attention to the brushes position: I had to try 3-4 different ways before making it work (it was silent, motor wouldn't even start).

[@stormkhan4250]

Question: why have a sacrificial part to save the motor should a jam occur instead of a racheting mechanism like in a drill gearbox/chuck? When it jams then the racheting mechanism engages and an audible sound is made to alert the user of jamming. No sacrificial part needed, no burnt out motor on jamming. Considering how expensive some of these appliances are surely they can adapt a similar mechanism from a drill gearbox?

[@seccat]

Im guessing someone Wife is happy because of this video. Happy Wife = Happy Life

[@papabear2965]

How did you get it so clean? Did you use any cleaning products? Thanks for the informative video. 👍

[@mosesmanaka8109]

You are a good Protestant Christian who knows about a sacrificial part. 🙂👊👍

[@johnhanssenkolstad211]

Any recommendation as to what kind of food safe gear grease? Dismantled mine twice now to replace the gear, but haven’t removed the grease since I haven’t found a good safe replacement grease…

[@JNacht]

Kitchenaid sells it directly along with the gasket.

[@mahmoudksouri8550]

Professional job sir 🫡

[@adelsonviegas1]

Obrigado, já vou trocar engrenagem da minha batedeira, excelente explicação!

[@jess130471]

Did the replacement but it Wong start at all Could it be the Coals that need replacement ? And great video 😊😊😊❤

[@oksana.lavruk]

I had the same story, I did not install the graphite brushes correctly. shine a flashlight and see the correct placement of the brushes, in this video here 11:33

[@oksana.lavruk]

kzbin.info/www/bejne/gZjHYmmDjZ6spqcsi=PoH60Onj0Ad9GGgy

[@davidsmart7341]

Great video, where did you get the parts from?

[@JAMESMANHUNT9]

Picked up an artisan that wouldnr turn off for free. Turns out it must have fallen over cause the speed lever was bent down at the knob, all i had to do was hold down on rhe top of the motor and pull up on rhw knob with my other hand really hard i was able to figure out the problem by using my mom's heavy duty kitchenaid as a reference. I even changed the grease in rhe beater mech with new mac1 racing grease

[@deandohertygreaser]

You lucky duck, im looking to buy one myself and they are costing over 500.

[@alexanderfedyna]

How should fuses be installed correctly, or more precisely, which side should face where (there are two large black bolts on both sides of the top cover)? What is the correct seating position for them? The mixer stopped working after I disassembled it following your video. What could be the problem?

[@Skrueger999]

Consider that the plastic gear may be used so it strips out if you get a finger or other body part stuck in the mixer. Better to fix a few dollar part than a trip to the ER

[@penelopelgoss2520]

Interesting thought. 🤔

[@bramboz1827]

Great video thanks , but how? and with what chemical? Do you get al the old black grease of?

[@pjs9346]

Excellent

[@elenapaliceanu3579]

@deandohertygreaser thank you for the video. We managed to replace the parts, the paddle is turning, but the mincer attachment doesn’t turn. Any ideas? Please?

[@laidman2007]

Job well done!

[@brunofreitas5499]

Very useful Thank you

[@efektmurowany]

Holly molly that is a lot of grease :D😂😂😂

[@joseglorival6949]

Parabéns 😂 gostei muito,!! Serrinha Bahia Brasil,!!!😂😂

[@Steve-Jody]

Why plastic when a Brass gear would be a better design. The thing is built like a beast with an Achilles Heel gear. Well done. Enjoyed .

[@wilkesysublime]

It's designed to break before you accidentally destroy the expensive motor or other more expensive gears.

[@ribob75]

Pretty cool man!

[@nastgawdat962]

Good job 👍

[@alteroldesloer1709]

... einen Überlastungsschutz kann man auch anders bauen (elektronischer Überlastschutz), allerdings muss ich sagen, daß das Gerät trotzdem sehr gut gebaut ist. Wir hatten in der Familie 2 vergleichbare Geräte von Bosch und bei beiden Geräten sind die Getriebe kaputt gegangen weil sie aus Plastik sind.

[@jacekparzoch2679]

very nice and informative video, can you tell me where you bought this part?

[@joller79]

Nice one..do u have the part number for that wormgear?

[@tevinallison4287]

Where do I get parts in need of a circuit board

[@georgebonney90]

That mixer has alot more grease in it than I thought would be

[@connieleblanc4909]

I am unable to remove the pin in the "spinning head". It seems to be stuck. Any suggestions on how I can get it to come out?

[@deandohertygreaser]

Hammer and parallel punch

[@ovalwingnut]

GR8T job iNtErEsTiNg & satisfying... thank you. Cheers from So.CA.USA 3rd House On the Right.

[@robertknight4672]

I'm very curious can someone tell me how the self locking mechanism works on these British tiltheads since it was never a requirement here in the United States of America do we have to remember to lock the mixer ourself.

[@Andrew-is7rs]

Tidy job 👍

[@penjenta6618]

Enjoyed your voice

[@jw3022]

What did you use to clean the grease off the parts?

[@freefisheater]

I was wondering the same thing!

[@brianbanks3044]

Wondering what they were mixing for that gear to burn right up...did mister homemaker decide to mix a small batch of nortar mix in the Mrs KitchenAid???

[@juvelynbengil7432]

where did you bought the gear and whats the part number

[@FinTra_]

You did not need to remove the bottom part, correct?

[@peterford9369]

Probably was mixing something and jambed the blades and the steel gear chewed the nylon gear. Probably made to do that rather than burn up the motor if machine jambs on something solid. Like someone's hand. 😢

[@mattinwinkymg]

For an expensive thing i wouldnt expect brass bushings. Maybe a load protection would be expected also. Would be interesting to see a much older model and compare quality

[@penelopelgoss2520]

I have my mom's machine, original Kitchen Aid mixer from the late 50s. 6 kids, and 2 adults, plus she was a cook. All of the gears are metal. Direct drive unit. Now I just need to find the beaters and blade for it. I found the small glass mixing bowl, but I think the large one broke a long time ago. Oh, well. It's my treasure now.😊

[@garyszewc3339]

​@@penelopelgoss2520if you're talking a mixer that had a large and a small bowl I don't think it's a KitchenAid. You probably have an Oster, that the model had a somewhat similar name somewhat similar name. KitchenAid mixers only have one size bowl for each model.

[@penelopelgoss2520]

@@garyszewc3339 Hi Gary, Ok, Thank you. It's packed right now but next time I have it out on the counter, I will check. Thanks!

[@kargeorge]

Bravo! but they say that Kitchen Aid Artisan has metal gears, but it turns out it’s still the same plastic.

[@matteogrilli1844]

Hi. Thanks for your videos, I always try reparation. One question: where can you get spare parts ? Online or shops ? Because it seems that diy repairs are discouraged..

[@deandohertygreaser]

online, loads of suppliers

[@jovy-anpacaldo589]

can i have the link? thank you

[@richardway3761]

They just don't make them like they use to, great recipe for people who have the newest ones. WELL DONE.❤

[@yp77738yp77739]

So much grease. Not saying it’s not necessary but my instinct would be to use a tiny fraction of that as surely it just flings off to the casing.

[@awladali8149]

Hello, please can you send the link or address of place where you bought the gear. Thank you

[@jean-claudemangan2708]

Any idea of washing machine?

[@سهيلاليماني-ي8ت]

لدي نفس الخلاط ويعاني من نفس العطل وهواتأكل الرول البلستيكي ذاته ولعدم وجودفني حاولت التعرف علئ الخلل وحددته وأشتريت هاذه القطعه وركبتها إلاإن الخلاط لم يعمل ربماأني أرتكبت خطأًفي التركيب شكراًعلئ هاذالفيديو من المهندس الرائع لقدأستفدة منه بالتئكيد

[@gregorypierce6703]

How much was the part?

[@alexanderfedyna]

Could you please tell me the part number of this part that was replaced and where I can order it?

[@deandohertygreaser]

amazon amzn.to/48MrAc0

[@fildafirgiawanl4135]

Best wishes always sir, I'm from Indonesia. Can you give me guidance on how to disassemble the Fomac B 15 planetary mixer. Please provide guidance, I really need it. Because I live in the mountains far from the city, and in my place there is no service person who can repair my mixer. Thank you sir, always healthy and always successful to you

[@BBRandom]

What did you use to clean the grease up so well?

[@emanuelmifsud6754]

Use petrol

[@jeremias8542]

Você tem uma máquina dessa pra vender

[@lurd5533]

Thanks for the video! What kind of grease is needed for the mixer? I’m cleaning mine now through your vid but I didn’t contemplated that step before 🤣

[@deandohertygreaser]

You need food safe gear grease

[@GlennTillema]

Is it possible to replace the nylon gear with a metal one?

[@deandohertygreaser]

Not that I am aware of. Plus I wouldn't recommend it.

[@NorroTaku]

can one scan or mold the gear and replace it with a metal one? read more comments apparently its to save the motor in case of a stall! rather this thing goes opposed to the whole rest of the chain!

[@amadolagopompa5231]

Saludos desde Cuba, a mi mezcladora le he cambiado el gobernador y todas las tarjetas , así como el engrane plástico, ha perdido la fuerza y potencia, quizás usted pueda ayudarme y sugerir algo

[@MsSoso521]

Where can I buy the gear from?

[@deandohertygreaser]

Amazon amzn.to/4bzWAfF