This video explains the issues that can occur with woodstove Eco fans and step by step on how to fix them.
Пікірлер: 16
@dsteveni77 Жыл бұрын
Thanks just ordered electrical cleaner spray and thermal paste. Fan is in bits, your video inspired me to have a crack at repairs! Thanks
@MrShopNS Жыл бұрын
Best of luck 👍
@paulbradford8240 Жыл бұрын
I had already repaired mine. I used thermal conducting double sided tape. There is a lot on the roll and it wasn't expensive. I also bought a new peltier at the same time as they weren't expensive. I'd read they deteriorate over time, so that's why I put a new one on the fan.
@jameslowmanjr61415 ай бұрын
I knew this video is old. But I bought one used it on. My Mr. Buddy worked fine. I put it on a bottle top heater. Seem to be working fine when I looked back the fans weren’t working. I couldn’t touch it I thought maybe the wires were burnt nope, it was just really hot. The plastic spacers between the thermal pad was melting. So I’m wondering if I match the spacers or still can use them and if I get new thermal paste will it start working again or should I just get rid of it?
@MrShopNS5 ай бұрын
I would try the thermal paste and you may also be able to buy new spacers. I wouldn't throw it out
@nickpanhead72096 ай бұрын
Is there a right way or a wrong way to install plate, I put mine back together noticed is running backwards now. Going to flip it
@MrShopNS6 ай бұрын
yes try flipping it
@nickpanhead72096 ай бұрын
@@MrShopNS yes that worked, but I looked like it slowed up a bi. Is it the the hotter the stove the faster it spins. ? My stove right now is running about 150° and it doesn't seem like it's spinning all that fast, thank you for your making the video, and your time, for getting back to me
@MrShopNS6 ай бұрын
yes the hotter it gets the faster it spins. make sure you have it on a flat surface so the heat from the stove surface convects into the body of the fan@@nickpanhead7209
@nickpanhead72096 ай бұрын
Ok great thank you for your help
@brakejoe6 ай бұрын
Handheld or tripod
@MrShopNS6 ай бұрын
??
@lallasjfk8 ай бұрын
How to fix whenmis making a noise ?
@MrShopNS8 ай бұрын
What kinda noise?
@flappyfishboy38137 ай бұрын
Like the whole blade is loose and moves around
@MrShopNS7 ай бұрын
there should be a setscrew holding the fan on the shaft this may be loose@@flappyfishboy3813