How To Repair Vacuum Cleaner - Electrolux Pure D9 PD91-4MG (AEG VX9-4-4MG)

[@touch-power]

the orange one is UTX capacitor HQX 474 [K] 275v ~X2 40/110/56/B

[@proexservis]

On this model (and sometimes, that capacitor is blue) 👍 on different could be yellow 334 [K] with 224 [K]

[@muhammedyuksel6059]

Hello, after changing the capacitor, the red LED is blinking and the machine does not work. Can you help me half?

[@proexservis]

Hello, what was first problem? Did you replace 474(k) capacitor?

[@muhammedyuksel6059]

It worked as in this video and shut down after a short time. This time is shorter at high power. After the 474k capacitor was changed, only the red LED started blinking. I reinstalled the old capacitor, but the red LED continued to blink. When I blocked the sensor pins, it worked for 1 second and turned off.

[@proexservis]

@@muhammedyuksel6059 is it same model with plastic regulator or with control on handle? Is it possible that you didnt connect all connectors on right places?

[@muhammedyuksel6059]

I think I made the connections correctly, but it could also be wrong.😅

[@proexservis]

@@muhammedyuksel6059 check them first 😅 if you have plastic regulator model be sure that you didnt rotate potentiometer to other side (max on max position and min is around middle of potentiometer). If you write me exact model I can check tech.document for troubleshooting