How to replace a 12 Hole Paddle Lifter on a Hotpoint,Indesit or Ariston Washine Machine

To purchase new paddles/lifters at a great price follow this link: amzn.to/2yRDhyK
In this video i show you how to remove and replace the paddle on a Hotpoint, Indesit or Ariston washing machine.

[@Olga-zm2xc]

It's a miracle! Amazing! I could never do that! And I had no idea that it was possible!!! Even now I don't understand how it works. But I did it!!! I am from Ukraine and never before I could find such clear tutorial in Ukrainian or Russian. Now I am completely happy (would be completely happy if there was no war in my country)! Thank you ))

[@lords-electrical]

Well done and thanks for the great feedback

[@AntoKyuuketsuki]

Added to my "Fixing Things (instead of breaking them)" playlist... All I needed from this video, was the reassurance to know it was the sixth hole and not the third, fourth, fifth, seventh, eighth, or ninth hole. Bought the replacement Hotpoint paddle from a kitchen appliance shop, which funnily enough was their last one and fitted it in less than three minutes to finally do the pile of washing I'd have done yesterday. Thank you for making this video clear. 😎

[@lords-electrical]

no problem, glad it was helpful for you

[@gogoasainfuriata762]

😂😂😂😂😂 You made my day. Cheers 😂😂😂😂😂😂😂

[@simonk9285]

Excellent job. Thank you. Shortly after the 10 y. old paddles have been replaced with new by "technician", two of them just fell off. Used this video tutorial to fix them and now it's all fine. Thank you again.

[@lords-electrical]

No problem, Thanks for the feedback.

[@NathanielWeetabix]

Thanks, removed and re-fitted as per video. Managed to retrieve the item that was causing the F05 blockage. Saved me some money. Gracias

[@lords-electrical]

No problem, glad the video was helpful for you.

[@louiseevans6354]

Thanks so much, i was so worried that I would have to buy a new machine but managed to fix it in about 1 minute after watching this. Massive help.

[@alexandradragan332]

De unde ai cumpărat.

[@rachyj9400]

Finally found the exact video needed for my model of machine, was only finding way more complicated ones or ones for other models. Thank you for putting this video up, I was starting to lose hope I’d find one.

[@JamilyaHersek]

Thank you very much . Nobody explains so good!

[@lords-electrical]

Thanks very much for the great feedback ☺️

[@davewatson9536]

Thanks v much. We are in lockdown, no plumbers allowed in! Couldnt have done it without your help.

[@dawnehoy]

I removed them to clean them, as had musty smell in machine, used all the cleaning washes going, but nothing worked, was so easy to remove and replace, such clear instructions, Thank you . I now have a squeak on slow spin since cleaning them, probably just a coincidence, anyone else had this happen? Thanks

[@royden197]

Thank you for being clear straight to it video. Now I know how to sort the paddle in my machine. Thankyou !

[@vannersw1]

first class Video, Took less time to fit than it took to watch the video, Thank You

[@robert3325]

A tremendous help, thanks for the education, I'm sure you've helped many either this great post. Regards. Rob

[@mt5144]

Top Man, great video saved me loads of time......I owe you a Beer!

[@anncollette8437]

Thank you for sharing and saving me some extra money to get someone out to do it for me.

[@lords-electrical]

Glad to help

[@pockigepestprezel2073]

Thanks to you, I didn't have to remove the entire heater 🙌🏻 I could reach the lost piece of a bra like this. You saved my washing machine! 🎉

[@lords-electrical]

Great feedback, well done on fixing your machine

[@barbarybar]

Thanks for that. Paddles started to gall off after 10 years. So not bad.

[@mad7206]

Thanks for the tip . I've just had a banging noise from the machine and I used this tip to make sure there was nothing left in the bottom under the drum

[@lords-electrical]

Glad it helped

[@shaecarr8014]

Thank you!! Excellent instructions. Helped so much! ❤

[@lords-electrical]

No problem glad the video was helpful for you 😊

[@ondermetu]

Thank you very much for the life saver trick. Exerting the right angle to the tabble became the key move for us. By the help of this video we got over the detached baffle issue. Thank you again.

[@tvfighter]

Thanks. You help me a lot!

[@niemandnenntmichprofessor8116]

Thanks for this useful information.

[@fairwind8344]

Oh my, it's a miracle! I did it! Thank you so much!

[@lords-electrical]

No problem, glad it was helpful for you

[@JasonWaygood]

I couldn't find the link to buy? No wait... Found it 😁

[@lords-electrical]

Just had a look and it is in the description of the video or here: amzn.to/2yRDhyK

[@whowho8172]

Just saved me £50 thank you

[@jimmcgregor6253]

Excellent, a real help and very clear on what to do. Thanks.

[@MultiLiaqat]

Very good

[@SaudiArabianGovernmentno.1]

Watching for no reason at all!!😂😂

[@katiarenadzhafarova2689]

Thank you very much! It was do useful for me ❤❤❤.

[@lords-electrical]

No problem, glad it was helpful for you.

[@MohamedAli-eb2yn]

Thank you for your information

[@Enolu]

Thank you so much for this, I can't mine back on. I have a new part and it just won't click back in, however hard I try to push it. I'm not sure one of the sides is lying flush with the drum. The metal tab is in the right position - are you able to offer any advice, please? The last one came off because the clip bits sheared off, so it more or less just fell off. Your video is very clear, thank you, but mine just isn't going back on, even when I am pushing so that the whole machine is moving back! Thank you for anyone's ideas, thoughts or feedback

[@lords-electrical]

I know it sounds silly but first of all is it the correct paddle for the machine, and if it is then i assume you are pushing it on the correct way round.

[@HAREKRISHNALOVEWISDOM16]

Thanks for the valuable information .....

[@brianking7573]

Good lesson

[@ICeTeaKusH]

Thanks for the video

[@stevetaylor9499]

Very helpful thank you !!!

[@palmo2952]

Good show Pls my hotpoint washdryer had a broken paddle and the spring holding the paddle is missing. Pls how much will it cost me to get it replaced. I also want to change the programme panel write up cover as all has been bleached away. Thanks

[@iansmith8277]

Does it matter if it smaller than original. The new one fits the same as original

[@kafa15001]

Thanks a lot , it works 🎉

[@lords-electrical]

Great to know it was helpful, thanks for the feedback 😊

[@kafa15001]

@@lords-electrical yep, even Miles away from you in Istanbul, it works ;) thx a lot.

[@saffyreid8790]

Thankyou for the help x

[@benshipley3457]

Great help thanks

[@levaithan666]

I found plastic shredded parts in my washing machine and I have no idea where it comes from, I tried cleaning the filter and in the small hole on to the left it's full of shredded plastic as well. Should I buy a new one or is it a easy fix? I have the feeling the pump or so might be clogged .

[@lords-electrical]

Hmm not too sure, it could be part of the pump that has broken and gone into the machine? Is it still pumping the water out ok and washing properly?

[@levaithan666]

@@lords-electrical no drainage of the water, and it looks like Christmas when the error pops up 😅

[@jessicasousa2177]

Thank you! Easy to fix after watching your instructions.

[@samwallis1750]

Can you do a video on the 23 hole one on an LG machine please

[@tempimccurry9094]

can you still wash if missing a pedal

[@zunimalik2317]

Great help but where is link to buy those pedals

[@lords-electrical]

It is here: amzn.to/2yRDhyK

[@amandamoran6471]

I need to replace the paddles in my hotpoint but the metal tab has broken of from under 1 of the paddles can I still put a paddle on without the tab please

[@lords-electrical]

Unfortunately it may not fit properly if the metal tab has broken

[@brianfarry1]

Where do l get the plastic tabs​@@lords-electrical

[@vadymmelnyk643]

Дякую за відео!

[@acsni0402]

Thank u very much the help!!!❤️

[@nixonsmateruby1]

Cheers mate.

[@倪文瑄]

Hi so I have a problem - the paddle keeps coming out on one section of my washing machine after being installed because it can’t lie flat - the back section is lifted and it thus slides out. I think this is due to the shape of the drum becoming deformed but how would I even fix this problem

[@lords-electrical]

Sounds like it could be a manufacturing issue. I would contact the manufacturer to see if they can sort that for you.

[@tempimccurry9094]

can you continue to wash if one of the pedal comes off

[@lords-electrical]

You can, but its not recommended as the metal part of the drum will be exposed and could catch on the clothes.

[@toyinphillip]

Thank you!

[@richardjohnson3463]

THANKS!

[@1111freespirit]

What about if the little metal is broken is it oke do replace it anyway

[@lords-electrical]

If the metal tab is broken in the drum, then the paddle may not stay in place.

[@1111freespirit]

@@lords-electrical omg 😒 i Hope so that will works

[@XDShorts365]

Спасибо

[@paulb9769]

I did this via the sump opening what a muppet 😂

[@bigshed51]

Great👍👍

[@GenCosmo]

Thanks! Very useful video.

[@NGHTNGLHS88]

Paddles aren't broken they're rattling around on indesit xwde 750841 X. Is it case come loose from a groove?

[@mihaiprofir7]

New direct injection have the metal lock at the back.

[@neon_gamer127coolguy4]

Ur voice is sooo relaxing that it's forming ants in my body!

[@andreaharding470]

Thank you

[@АлександрК-ы6ъ]

ZerGut👍

[@lords-electrical]

vielen Dank

[@Kylo-kg4zq]

Hi my tab has broken off on the drum

[@lords-electrical]

If it's broken off in the drum side there's not a lot you can do. If it's just the plastic drum lifters then you may need a new one

[@ralu9457]

@@lords-electrical can it be secured with screws instead? could you make a video how if possible, please

[@filpip6762]

Has to be stiff to be good !! :)

[@emilynichols716]

Hi, I have a hotpoint machine and the paddle has 10 holes, are you able to tell me where the tab is?

[@andyjudge5150]

Nobody spotted that at about 2 minutes 20 seconds you refer to the drum securing tab - the one that needs bending - as being a plastic tab. It is of course a metal tab.

[@НатальяВасиленко-г3м]

По русски можно

[@SecY12]

Thank you very much. It is very helpfull

[@topherbeckett6695]

A great demonstration and clear instruction...excellent. Thanks

[@tomaszkukowski8983]

Thanks a lot! Great job!

[@ДмитрийЦаренков-т7о]

Спасибо