How to Replace a Door Seal on a Bush Washing Machine

[@alyxridgway5039]

This video literally saved me from buying a new washing machine, bought the seal and replaced it with the help of this video, amazing 🎉

[@DianneWithaT]

Thank you so much my Bush washer dryer is slightly different but this video got me in the ball park and saved me a lots of money.. my husband was very impressed as he was prepared to buy a new one. Thank you again

[@leecleaton3068]

My washing machine wasn't draining properly, and I accidentally pulled the door seal out. Followed your advice to refit seal and removed 'a sock' from the tube near the filter underneath while doing so. I tilt my hat to you, saved me waiting for a call out and and paying for one. Cheers thanks very much 👍

[@peterjames1258]

Thank you. I have an almost identical AEG L81400, in Canada, which is also a rebadged Vestel machine. Helpful description of how to open-up the front panel.

[@olliebeck2952]

Just want to say thanks. Followed this to the letter and managed to complete the repair in just under an hour and a half on my Bush machine. These types of videos don't get the credit they deserve, really clear. Cheers 🍺

[@ChristianHodgson]

Got this exact machine , struggled for ages before finding this. New front clamp is slightly bigger than the old one with a longer spring. Thanks for the video

[@Paul-j3l]

My spring just came off. Leaking water from door .ur video help show how to fit and where it fits thanks happy wife now

[@louisefraser1959]

Just helped me fix the seal of my machine. Didn't fit a new one just reset the old one back to where it should be and fix the retaining spring. Washing machine isn't old so hopefully this will buy me more time as taking the whole front end off I couldn't do. So thank you

[@LooseGripHandle]

Thanks boss, just got mine fixed. On the last part of attaching the spring, try using a pair of gloves and absolutely tonnes of washing up liquid, started from the top, Try to hold it in place with both hands working round and keeping wire flush, the end part might get tight but as long as your keeping it flush it shouldn't be too hard. Lots of fairy!!

[@H44RIS123]

Thank you. I managed to get a seal from Amazon and thanks to your Chanel I am confident to fix it my self brilliant thanks

[@jackhtfc2010]

Great video, followed every step and managed to change the seal with ease 👍 thanks very much

[@ibat400]

Thank you for this excellent video. In case it helps anyone, this also works perfectly for replacing an Electra W1449CF2W door seal because it is the same washing machine with a slightly different front panel but identical on the inside.

[@BigPeaUK]

I owe you a pint or 3. The step by step guide really really helped as our machine which is almost identical but branded as ProAction. The only part that I got really stuck on was putting the retaining spring back on the front seal. It had to have two of us really struggling with a pair of needlenose pliers to get it back on. I have no idea how you did it in the video on your own. Thanks again!

[@johnhepworth1531]

Whenever I fit one of these, I whip out the four coach screws holding on the concrete ring on and take the ring off. It makes getting your fingers around the seal to fit the lip around the drum and putting on the clamping ring much quicker and easier.

[@jeremykemp3782]

I need to do my son's tomorrow. Wish me luck and thank you

[@isrootofalllife]

My 4 month old door seal got damaged right that the bottom, emptied a full load of water onto the kitchen floor 😖 I was dreading changing the seal until I found your video, it’s given me 100% faith in myself to have a go at it, I’ve ordered a new one off eBay for £23, hope it’s ok 🤞 Thanks for taking time to make the video, great work mate 🤝

[@isrootofalllife]

Just wanted to feedback, with your video playing on the shelf I successfully fitted the new door seal, I did a few rewinds but got there in not too bad time 😂 And what a top tip with the washing up liquid, no way would you succeed without it👍 And that spring seal 🤦‍♂️ Anyone reading this, follow the video and save yourself quite a few quid, great tuition and top rated!!

[@hinchliffe2258]

Thanks mate. Very helpful.

[@liammccormack7894]

Perfect advice for me.....thanks

[@andyharry785]

Thanks mate…. Worked a treat.

[@thinker........]

You saved me from buying a new washing machine.. 👍. But the way, anyone who finds it difficult to put the seal on. Always start from the bottom and then slowly to the top..

[@leetigger8443]

Big help - thank you very much!

[@josyjacob1517]

Thanks, It really helped.

[@TheBigLezFanChannel]

Very helpful, thank you!

[@shirleymclean5895]

Size 20 torx screw driver needed - will do the job!

[@philwright7895]

Great video, thanks

[@vickiwarner7628]

Thank you, easy to follow video. Can use my machine again

[@lilycatgamer]

Very helpful mate, thanks!

[@hfjhnbj]

Really really helpful- thank you!

[@jamiepegler7851]

Job done cheers mate

[@colin7225]

Thanks great video I got it done

[@didihunt]

Saved my ass with this vid appreciate it bud

[@HooverLux]

Great how to vid Phil, really informative, even a novice bodger like me could do that. How do you change the belt if you can’t open the back? I think a how to vid would be in order.

[@servisslimline]

Great suggestion!

[@HooverLux]

@@servisslimline you’re absolutely welcome my friend 🙏🏻

[@ThemisIsNoMore]

Thank you so much!

[@introverted.magic.shifters]

i think vestel style machines are applied to niche brands: Montpellier Bush Vox Sharp and more....

[@nadeemshareefofficial]

Thanks.

[@andyley329]

Very helpful video👍. if i had made one it would have to be rated 18. Those bl****y springs & yep i tried it without washing liquid to start with. Many thanks

[@servisslimline]

Glad it helped 👍👍

[@pauljaffasdunn276]

Hi I can't get the spring back on 😡 😭 any tips would be much appreciated

[@Mjay32]

Any idea which panel needs to come off to replace the drainage pipe on this particular machine?

[@servisslimline]

no panels come off unless you take the front off, ypu can just unscrew the pump fom the fromt and take it out the bottom , probably easier and quicker

[@Tubetube499]

Done everything up to putting the new seal on, impossible for me 😢to

[@S4e88]

Do you think if I’m careful I could do this without taking off the front? I have removed the seal without already. Cheers

[@servisslimline]

You can but it can be awkward

[@S4e88]

@@servisslimline thanks might give it a go

[@hayleyspouge9944]

Great video! Does anyone know what type of seal I need for this washing machine and where I can purchase it from? I don't want to get the wrong one 😅

[@afeefaanwar3868]

Hi I’ve got a Bush WMDF814B washing machine I’ve taken all the screws you said in the video but my front panel will not come off, any ideas?

[@servisslimline]

the panel should slide down if i remember right, if all the screws are out it may just be stiff

[@peterjames1258]

The front panel slides up. Don't forget to first move the dispenser out of the way. There are 3 of those locating pins each side, and it's kinda tricky to disengage them all at once!

[@croccatcher]

Is this the same for all bush washing machines?

[@servisslimline]

The older ones are slightly different, need to remove a kick panel, but this video applies to everything after that

[@micknolan4452]

Need to know part number for seal in video anyone help me out 🙏

[@TrapaniSicilia]

Struggling to get parts for my machine

[@yalrikabi2007]

Bush is Vestel

[@servisslimline]

well done