How to replace a front wheel bearing. Audi A3 8P.

[@kolegakolega]

Useful video 😎

[@DT200LC]

very useful video for my A3. Can you also give torque (Nm) for all the bolt you tighten ?

[@Adrian_Adam]

The Wheel Bearing assembly *8S0498625A* comes with three M12x1.5x45mm hub bolts and one M16x1.5x70mm axle bolt. *All the bolts are Triple Square*, aka 12-point bolts. Looking at the bolts from the assembly I just got, the Axle Bolt looks like a 24MM which I do not have, but my 15/16 12-pt socket fits snug enough on it that I won't be getting one. The *2013 AUDI A3 Spec Book* lists the torque spec for the Axle bolt at: 70 Nm plus an additional 90°(¼ turn) for 12-point bolt *WITH RIBS * or 200 Nm plus an additional 180° (½ turn) for 12-point bolt *WITHOUT RIBS* The RIBS refer to whether or not your axle bolt has ridges on the underside (side facing threads) of the flange. If you do not have a wrench that hits 200 Nm you can use a breaker bar, tighten like hell and it should be fine. The hub bolts are torqued to 70 Nm plus an additional 90° (¼ turn)

[@maximeleblanc1903]

no information about socket sizes?

[@kolegakolega]

What about the nut and allen key sizes ?

[@CompleteBaloney]

Some videos show no need to touch suspension. Wonder why. Removal of drive shaft?

[@a___________r414]

Remove driveshaft is necessary ,,, else hard to remove the screws or impossible!

[@gjermundification]

Dangerous video, not a single nut is entered manually.

[@pekkai4204]

In what stage was the bolt of the driveshaft tightened to the specific torque?

[@ralphpanarello8054]

at 4:44

[@kevinkev1530]

Thx for the info

[@TheCoatneyadkins]

Are those double or triple square or torx head bolts holding the wheel bearing in?

[@AreebH_04]

Triple square M12 bolts

[@davidramon5845]

HOLA ANDRES UNA PREGUNTA TENGO UN AUDI A3 2015 2.0 T TENGO QUE REMPLAZAR EL WHEEL BEARING THE EL FRENTE DEL LADO DEL PASAJERO , SERIA EL MISMO PROCESO ?

[@AndresLopez-or8xp]

David Ramon hola, el vídeo es del lado pasajero, pero te recomiendo que cambies los dos lados, lo recomiendan los fabricantes de rodamientos. Un saludo.

[@danielarturocabezasfuentes8762]

Hola, Como has hecho para ajustar el tie rod end tan fácilmente. Cada vez que quería hacerlo giraba el perno(tie rod end) y la tuerca al mismo tiempo.???

[@luisgapr]

Hola Adres, Tengo Audi A3 2015 y a 50MPH tiene un zumbido pero los aros son replicas no originales. Podra esto ocasionar el zumbido?

[@AndresLopez-or8xp]

Hola Luís, no lo creo. Recuerda siempre cambiar los dos de cada eje.

[@luisgapr]

Saludos, Pude resolver eran los bearings malos. Gracias

[@wengv]

it will be better if you can provide us the torque spec for each bolt.

[@VeRoTrickz]

is this similiar to the audi A3 8V? from 2012- to now

[@acase11]

Yes I would assume so. I am using torque specs from a B7 A4 as they are similar thread/bolt sizes. Use loctite also when assembling.

[@GlynTaylor]

Wish you mentioned the socket sizes, I just spent an hour googling to find out

[@justinm5647]

Would you please list the socket sizes?

[@therealjeepking]

What's that nifty little blue purple hanger called? I'd love to buy one for doing brakes lol

[@AndresLopez-or8xp]

It'called twist. More info : makeyourtwist.com

[@kevinkev1530]

How donu know if it's gone bad

[@freddythefrog9154]

You'll hear it.

[@diracelektrotechnik316]

the musik is obviously more important, the video is too quick. Imortant details are disguised. For instance cleaning the break-disks only the outer area and so on ...