How to replace a Jeep Cherokee XJ turn signal high low beam lever

Replacement of Jeep Cherokee Multi-function lever because the Jeeps high and low beams were no longer switching from one to the other.

[@sonnyspliff]

thank you. this helped a lot!

[@miker5862]

Thanks

[@peteramarose]

I’m having the same problem... only have low beam,hit the high beam light goes out but inductor light on the dash comes on... replaced the switch as you did still nothing...... any other ideas what it could be

[@mycoolkeno]

There is a relay under the dash by the parking brake i believe that is usually the problem. I think I mentioned it in the video. I haven't had a Cherokee for a while so I can't remember exactly. good luck though, hope you figure it out.

[@peteramarose]

Only relay there is for the flashers

[@seniorxj2931]

That was funny!

[@evolution5773]

you from Western PA?

[@mycoolkeno]

How'd yinz guess?

[@maximusilive4theking986]

Where is the 89 cherokee high beam ?

[@mycoolkeno]

Is that a hipster band? Never heard of the 89 Cherokee high beam.

[@MumentoMory]

Do you have any idea where the headlamp buzzer mechanism is located? Mine isn't working, and that's one feature I'd like to restore. I've killed the battery a couple times leaving the headlights on because I leave when it's dark but by the time I get to work it's light and I just forget. I have a 98 Cherokee Limited 4.0L. Sure the uber specifics don't matter. But I've spent all fucking day searching the internet for this thing and I'm seeing nothing helpful.

[@mycoolkeno]

check your fuse box. I believe there is a little black or blue rectangular box. that is the buzzer. I think it may have a switch. might just be turned off. its inside the cab driver side. Not a hundred percent sure though and don't have the jeep any more to go check. But that is my best advice bud.

[@MrChomcky]

It’s located within your gage cluster. So if it’s bad or broken you may need a new gage cluster.