How To Replace a Jeep Cherokee Water Pump

[@salamefamily6232]

My Cherokee Freedom's water pump took a dump on me yesterday and had to pull it into Lowes and leave it overnight. Came home and watched this video and got every part and tool size I would need, went to my baby this morning and success! Dude you rock! Thanks bud! She's home safe and running better! I like your attention to detail.

[@dubleomikel]

Your videos are awesome. No chit-chat, straight to the project with great commentary on tips and bolt sizes.

[@tylermorris9196]

bout to do this to my 98, and its funny how all of us with a cherokee says "well since im in there i might as well replace it anyways" hahaha

[@MrLektrik66]

J Just E Empty E Every P Pocket It's a labor of Love

[@illidur]

@@MrLektrik66 its like 28$ dumbass

[@ManifestNMotivate369]

I'm doing mime tomorrow on 2002 jeep cherokee limited.

[@Deadbuck73]

I’m watching the video so…. 😂

[@mrsmooth78]

You saved me a handsome chunk of change with this here video, sir. My water pump blew up on the highway yesterday, and after having spent an arm and a leg on my family this Christmas, I wasn't keen on going to the mechanic. You're a tremendous instructor, keep up the great work!

[@gort400]

One of the best repair videos ever. Thanks

[@bdr5150]

@@gort400 Out Jeeping, Nickintimefilms and Bleepy Jeep is all you need. You can find any fix needed for all that goes wrong with an Xj on these 3 channels.

[@bruceperander9286]

I have watched many jeep and truck repair videos and I have never been compelled to comment on any of them...GREAT job with this video the lighting was good, the audio was good, your step by step explanation of the whole procedure was spot on! I have a '99 Cherokee and I am going to tackle this project this weekend. Keep the videos coming!

[@OutJeeping]

Thanks for the support!

[@ryangonzales8697]

You saved me 700 bucks in repairs. Great video!

[@rottenzombieoutdoors198]

Thanks man, I needed this. These mechanics are getting crazy with their prices.

[@dianac2783]

Thank you! I just changed my own water pump thanks to your video !

[@BUKWulfSh0t]

Did you really or did your dad/ or father do it for you?

[@dianac2783]

@@BUKWulfSh0t This is a very juvenile comment. Btw... My dad's dead.

[@BUKWulfSh0t]

@@dianac2783 t.m.i.

[@tonyjenkins9143]

Hello just brought a Jeep Cherokee sport 2 Dr. Water pump needs to be replaced and ran across your video. You are very detailed in explaining and show how to remove. Thanks this is very helpful

[@marv.mon.9845]

Nice vid. Super simple yet very informative! Thanks brother! P.S. who also thought he was gonna hit the garage door with the hood? 👍

[@jdfinepainting4460]

Great detailed video, thanks for telling what size sockets to use and being so informative! Replaced it outside in 15° weather today and this video definitely streamlined the process. I appreciate it

[@scotpuckett2598]

Extremely well done video. Great for the novice mechanic. Very clear, concise instructions. You're saving alot of people alot of hard earned $$$$'s. Bravo

[@Aldohdezo]

This actually the best video tutorial I’ve seen, you know what you are talking about make it seem simple and doable.

[@chrisb6162]

I've used several of your videos to make repairs on my 96 Cherokee. Your instructions are awesome and you don't skip over any details. I was watching one video and the guy just skipped over the part where he removed the fan shroud and fan. I can fix things but if a step is missing, I might sit there for a half hour trying to figure it out. Thanks for taking the time to post these videos.

[@OutJeeping]

Glad to help

[@radsandrems1734]

Straight to the point. Best repair vid I've seen. Time to work on my 4.0

[@richardbeckmann6720]

I noticed you didn't put any r t v Or any gasp at seaman on the housings or the Gaskets. Is it unnecessary?

[@OutJeeping]

Nope, not if both surfaces are clean and flat. Gasket does just fine on it's own

[@michaeldunn7411]

Awesome video! I just replaced mine yesterday. I will say this: I had some issues with the thermostat housing. These crack a lot and you need to be super careful when you put it back on. I had to buy a new one. Also, please use some RTV silicon gasket maker on the inside of the thermostat if your thermostat did not come with a rubber gasket on it. My local auto store did not sell my thermostat with a rubber gasket already on, so we had to use the RTV silicon stuff.

[@OutJeeping]

I've been using just the paper gasket for a long time and never had any issues.

[@frederickdominguez4829]

Great how to. Love those grimy hands. No rubber gloves. And flushing the radiator to the curb. ! AWSOME !!

[@frederickdominguez4829]

Props

[@randybonner9870]

This was a much better video because some videos would have you remove the power steering pump and I can see that is not necessary watching your video thank you very much

[@stephenbarry200]

feel free to post any videos for 1987-2001 Jeep Cherokee 4.0L. I Subscribed. Thanks

[@Jeroendorrestein]

Thanks, excellent video! I am about to start replacing pump and thermostat on my 98 Cherokee. I have seen quite a few videos where they remove the PS pump completely. Could not figure out why, good to see you leave it in place.

[@jasonmathiasen7209]

Awesome video. Step by step knocked it out. I also used some permatex blue to hold the gasket in place

[@caramelfrap1227]

I just got a emerald green, manual 98’ jeep Cherokee sport! Can’t wait to start working on my new whip, I’m also a woman so this new journey is very empowering!

[@EAMyates]

Nice job, very helpful. I've watched several videos on changing a Cherokee water pump. I am a novice weekend mechanic and I really appreciated your careful explanations especially because you included some stuff that the others missed. So thanks.

[@wjb111]

Great video! Looks like replacing the valve cover gasket would be easier access while doing the water pump. Mine needs it.

[@ajmorgan5940]

As jeep owners say, "While you are in there".

[@arucarddimples1944]

I am stuck in that same boat. Oil seepage from valve cover and just not gotten around to it yet. It does look like as I do the water pump might be a good time to tackle it. That and I've been dreading the thought of replacing my heater core. I haven't had heat in my xj for seven years... so it would be a nice change.

[@wildwest9395]

Im a fan of flushing the heater core anytime im flushing coolant. Part stores rent out a handy fitting to go on the end of your garden hose for it that really cleans it out.

[@dannyturner7967]

Thanks for the video water pump on my 01 xj went out today and i got this video and a pump, inlet tube, thermostat, and temp sensor all ready to go on...and you got a new sub

[@terryboswell8133]

Yep. 2000 w/310,000 miles on it. Pump finally started leaking. Gonna do it tomorrow!

[@chrisbuechele7005]

Holy shit that hood almost hit the top of the garage door I was cringing as it rolled back lol

[@josemorales8127]

Thank you for your video got mine all pulled apart in a hour with the new thermostat and houseing in then was to to go to work water pump install in the morning thanks from Indiana

[@jayzeno78]

Amazing how to video, one of the best I’ve seen!

[@davedorn6764]

Thank you! Great video. Clear explanations and good camera work.

[@cdbgbvo]

Thanks man, awesome vid! Upgraded water pump and thermostat housing by watching this video.

[@taylorama6078]

Just saved my ass here thanks man🙏fr fr the best video I’ve seen on this. I’ll be doing this repair here soon to get my 93 Cherokee back up and running

[@RobertWilson-td7eb]

Excellent Video - Very, descriptive and organized procedure. Take notes, and DO IT YOURSELF. MANY THANKS, !!

[@RobertWilson-td7eb]

One little note. I have learned that having the exact correct radiator cap / correct lb or pound pressure is super important to solve OVER HEATING PROBLEMS ON MY 4.0 XJ.

[@OutJeeping]

@@RobertWilson-td7eb That is absolutely essential, 16lbs I believe.

[@540mohd]

Perfect video but what is the brand name of the new water pump please advise? Thanks in advance

[@OutJeeping]

I used an AC Delco one off Amazon

[@mndzmkl]

Thanks for the video. Finally got my 92 MJ running again, only to find a new leak at the gasket that wasn't there before. Might as well replace my pump as well.

[@wyattandwill12]

The metal coolant pipe is out of place and blocking my valve cover so I wanted to scrub through this to get a better view of where it’s supposed to be. I got the VC off but I still guess that’ll have to be fixed to avoid future issues

[@Spruce-Bug]

Man your videos are a godsend.

[@BUKWulfSh0t]

Hey at 5:51 , whats the name of that hose? Mines copper or metal, not sure but im about to replace the water pump, should i change it?

[@OutJeeping]

That steel tube that comes off of the water pump to the heater core is just called the water pump inlet tube. It can be found here: www.amazon.com/Dorman-56398-Water-Pump-Inlet/dp/B001C6JCU0/ref=sr_1_3?crid=2Q9EWKFH47314&keywords=jeep+cherokee+water+pump+tube&qid=1648132556&sprefix=jeep+cherokee+water+pump%2Caps%2C82&sr=8-3

[@mickh8538]

Thanks for posting really helped me here in Sydney Australia bit harder to get the lower radiator hose on due to right-hand drive config but other than that spot on cheers

[@starvnny3535]

How did you check the tension on the serpentine belt? Worried I'll get mine too tight or too loose I don't know how to check it.

[@OutJeeping]

I usually tighten till it has about 1" of deflection.

[@letswalkhome6133]

i feel confident that i can do this! thanks :)

[@letswalkhome6133]

i might have some questions...lol

[@letswalkhome6133]

putting the belt back on and there isnt much slack. any tips? i loosened the tension pulley

[@thomastbucket2360]

great video, little hint about burping system. turn on heater to circulate water better

[@OutJeeping]

That's true if you have a 96 and down Cherokee but if you have a 97 up they dont have a shut off switch for lines going to the heater core.

[@jeepthunder3708]

Nice video and a great ride, i would appreciate it if you would advise about the NAPA tru- flow pump, is it good or not for 30% offroad use, also how did you get the flushing water out of the system and how much coolant did you actually use?

[@joshuacourtney3916]

Perfectly done video. Thanks dood!

[@brentkirner5499]

Which port do you send water into when you are flushing with the hose.

[@OutJeeping]

All of them and both directions

[@lucusharrington5497]

Water is a part number for the hose off the water pump? I've looked and looked for one and it keeps coming back to the 2 main radiator upper and lower hose

[@OutJeeping]

www.amazon.com/Dorman-56398-Water-Pump-Inlet/dp/B001C6JCU0

[@brettallenthomas]

Thanks.. well done video with great explanations of what and why your doing stuff..

[@Monuments_to_Good_Intentions]

thanks for showing how easy this is, I just bought one of these for $300 that needs a water pump and a brake line. 5 speed manual, hopefully after fixing it, I can quickly sell it,

[@victorjramirez1948]

Good job on video. Easy to follow instructions

[@ogj5]

The intense moment where you think the hood is going to doink the garage door.

[@krishaw3172]

Thank you! Your video was a huge help.

[@freetob1]

Why did you remove the temp sensor and the thermostat housing??? Hmmm This must be different than my 97 Cherokee xj. You use a 13 mm and 15mm. Ok looks like mine but I don't have to remove those parts.

[@username8171]

Nice job explaining it all. I ended up having to take off the steering pump and bracket to get to the lower hose clamp.

[@bloodfist186]

Use a small c-clamp if you have one lying around to go around the hose and bind the hose clamp from beneath. Replace with a screw type universal afterwards to prevent future headaches.

[@salamefamily6232]

Yeah he had a screw clamp. Had to take my powersteering too because of the tension clamp being right under the bracket 🤦🏻

[@gclem6132]

Good video, I was dreading this job but it doesn't look that bad. New subscriber here.

[@smartin1601]

Thank you, nice job and to the point. Take care and God Bless you.

[@shopnwoods9901]

Great video. Very thorough.

[@SmittySpeaks]

I'm replacing the radiator and thermostat. I don't think the water pump is bad, but should I replace it just for good measure?

[@OutJeeping]

Woundn't hurt and worth it since you are in there already. Also they are relatively inexpensive.

[@zackman815]

I like your heat shield around the injectors. Does anyone sell something like that premade?

[@OutJeeping]

Design Engineering offers a heat shield wrap for the fuel rail and injectors.

[@domingohernandez6596]

I would like to have one of those outside windshield visors....

[@johngalt9549]

Awesome! You just saved me $300!

[@scottb8682]

Thanks man this was awesome!

[@73MCLOVIN73]

New belt on still can’t get the water pump pulley off just keeps spinning

[@73MCLOVIN73]

Got it but I just snapped the top bolt taking off the thermostat .............. fuck

[@arothbauer]

Thanks man this was a big help!

[@andyclemente4205]

Thanks for the video, saved me some money. How do you call the tube comes out the water pump

[@OutJeeping]

Water pump inlet tube.

[@andyclemente4205]

@@OutJeeping thanks man

[@deegaw11]

Wait so I don’t need try and burp my system for 30+ mins? I’ve tried burping my system for 30 mins and there were still bubbles. Just close it and it’ll burp itself?

[@Immapsycho677]

Doing this rn and envying how easy disconnecting the electrics are for you

[@OutJeeping]

Most of the clips on mine are already broken off.

[@MC-eh2ot]

Is there anyway to break the bolts without the belt on?

[@OutJeeping]

If you have room for an impact you can use that or use a strap wrench on the pulley to hold it in place to be able to break them free.

[@MC-eh2ot]

@@OutJeeping appreciate it. I actually had to put the belt on to get the last bolt. Unfortunately don't possess a impact wrench that small

[@RussMcCoydrums]

Thanks for the how to! helped me alot👍cheers

[@rodrigohuallanca662]

I will be replacing the radiator, radiator hoses, thermostat housing, water pump, would you suggest I do it in an specific order? BTW thanks for the content.

[@OutJeeping]

No specific order but I would do it all at the same time, that way you only have to buy coolant once.

[@bdr5150]

Do you have to remove the theromostat housing in order to do the water pump? Or does taking it off just make it easier?

[@OutJeeping]

@bdr5150 Not required, but it does make it easier

[@bdr5150]

@@OutJeeping ok cool thanks! I think mine is about to go or is leaking bad. For awhile now, every time i start it in the morning, a pulley would squeak until it kinda warmed up and then went away. Yesterday it took alot longer for it to go away than usual. So i drove it to get groceries and run some errands. When i go to get back in it to drive home, it had a puddle under it. So when i got it home it was still coming out pretty good, what looked like to me was it was running down the front of the engine, and was dripping near the crank and oil pan. After talking to my dad and friend. We are pretty sure its the water pump. If you had to guess, would you say its the water pump also? Or could it be leaking right at the front of the oil pan?

[@OutJeeping]

@bdr5150 Sounds like water pump. When the water pump's internal seal or bearing goes out, its designed to leak coolant out if the weep hole

[@bdr5150]

@@OutJeeping Nice!! Thanks for replying back! After taking a better look at it when it was running in the driveway, its definitely the water pump. Had to stop to cook some dinner but will be ordering a pump tonight. Is any brand better than the other on rock auto? I was looking at one that came with the seal. But if one brand is better than the other, ill buy the seal separately if needed to

[@OutJeeping]

@@bdr5150 I like using Gates for all my cooling system parts.

[@cdarbonne]

Great video! So my question is, mine appeared to be leaking from lower rad hose, I went ahead and replaced both lower and upper and thermostat and gasket, but now appears to be leaking from water pump? Does the water pump start to leak when it’s going out? 97 Cherokee Thanks

[@OutJeeping]

If the bearing is going out in the alternator it will start leaking. There is a weep hole that is designed to leak when it goes bad. Otherwise it may be leaking from the water pump gasket.

[@KingsChevyShow]

Enjoy the video but do they suggest not using gasket maker at all?

[@OutJeeping]

No need for rtv if both surfaces are flat and clean, the paper gasket works just fine.

[@KingsChevyShow]

@@OutJeeping heard that man..I just always slap it on any of them bc it makes the gasket stay in place to get bolts through then when I've gotta replace it , it makes the gasket stay with the rtv and I've found its easier to get it off afterwards! But that's just me Haha

[@OutJeeping]

@@KingsChevyShow Yeah it can help in those situations so its optional to use it.

[@cdwalkman8401]

I seen other videos use a paste type sealer for the gasket to stick to the pump and the block? Isnt it not good to just throw it on without that sealant?

[@OutJeeping]

Gaskets have been used for far longer than rtv, theres no reason to use that along with the gasket. They came from the factory with just a paper gasket and it works just fine.

[@glenduke4874]

Great video! I'll be doing this soon

[@ajmorgan5940]

Replaced my t-stat, was overheating , flushed system, and still did it, water pump doesnt leak or squeal, could it be bad with no other symptoms? Before I take to the shop,

[@OutJeeping]

I would check the fan setup and see if it is all working properly, also any metal shavings in the coolant is another sign of a bad water pump.

[@redrider86401]

ok I have a 2001 jeep Cherokee classic 4.0 and it is heating up to 210 then shutting off like it is vapor locking - I have to sit until it cools before it will start again - I replaced the radiator cap and the heat sensor on the thermostat housing - my fan clutch is tight and seems to be working - no leaks from my radiator or water pump - any ideas ?

[@OutJeeping]

Maybe replace the thermostat, those are wearable parts

[@hypotheseabdo9479]

I fell in love with this car

[@meastwood274]

Outstanding job.

[@1crazynordlander]

Nice Job of explaining. I think mine is leaking so this helps.

[@gort400]

I am at the point of removing the mechanical fan housing for more room. Mine appears to be larger (1996 Jeep Cherokee Sport). I removed the two screws but cant get the housing past the fan and the radiator core. Any suggestions?

[@iHempus]

up load video of what you ask

[@gort400]

Trent, I dont know how to do the upload. As it turns out, I had to remove the top radiator hold down bracket ( black metal that goes from front to left) and the front galvanized bracket that holds the top front fender piece to make room to remove the fan housing, then the fan. Lot of screws.

[@jaderamos46]

Hey , would you know where I can find valve cover bolts for 98 cherokee

[@OutJeeping]

Cant seem to find them in sets but I found them sold seperate here. www.morris4x4center.com/crown-valve-cover-mounting-stud-6035968aa.html?gclid=Cj0KCQjw4f35BRDBARIsAPePBHwk1JGtlZS1f8K9agELT9dUzz-J2S9diKXx_JAhgnFPQXQkAr5GPTYaAmzrEALw_wcB

[@jaderamos46]

@@OutJeeping thanks bro...

[@adrianolavarria]

I done my last week, pump and thermostat....the water pump was making a lot noise....was sound like the engine was bad

[@jabrusii]

How tight did you twist the inlet tube? I’m in the process of draining my coolant again as it’s leaking at that connection

[@OutJeeping]

Tight enough to seal at the threads and is pointed in the right direction but not necessarily as tight as it will go

[@skylinevspec000]

On my australian XJ the fan shroud did not come out. Had to remove radiator as well

[@OutJeeping]

Those shrouds are sometimes a pain to get off especially if you have a transfer case drop.

[@smalltownracing8291]

Yeah i gotta question what rims and tires are those ?

[@OutJeeping]

Not sure on the rims, they were second handed and probably Chinese. Tires were nanking mud stars which I do not recommend

[@jeremyklitzman853]

Would this work for a '98 XJ as well? Assuming it's the same engine layout.

[@OutJeeping]

Yup should be the exact same for the 4.0

[@dannyturner7967]

Did you use thread sealant on any of the bolts

[@OutJeeping]

Nope, none of the waterpump bolts thread into any coolant areas.

[@ericgordon8542]

Great video... well done.

[@topormotors]

My thermostat shipped to me with no gasket. Can I just use red rtv?

[@OutJeeping]

You can use that otherwise there are rtv types that are specific to cooling systems.

[@ncognitod.460]

I'm halfway through doing mine now & there were some steps that would help first timers, that you didn't show or explain: best way to flush the block without removing block plugs; how to keep that water pump pulley from turning when you get to the last bolt (TIP: I use a vise grip to hold it in such a way that the vise grip jams against the thermostat housing); how best to get proper tension on the belt. THAT is something that I struggle with & hoped to see here. BTW: no gasket maker on the gaskets? Why not? I see that you don't answer questions but I hope that my observations will get others thinking & posting.

[@SpidrMonky-kx5ku]

Funny enough I'm literally about to replace mine also haha... but what do you mean by gasket maker?

[@OutJeeping]

I answer what I can, but I get a bunch of comments a day I got to keep up with. You shouldn't need gasket maker for using a paper gasket. The paper gasket works fine on it's own as long as the surfaces are clean. I torqued down the water pump pulleys after I had the belt on to hold it. And for tightening the belt, I'm used to know where to tighten but usually it's when you get 1" of deflection.

[@ncognitod.460]

@@SpidrMonky-kx5ku RTV sealant is what I really meant. There's a specific type for water pumps/thermostat housings. I used it on my installation.

[@SuperUnknown1967]

No need for rtv if you clean the surface properly.

[@rickc1124]

Any RTV required for this procedure on the gasket ? Just curious

[@OutJeeping]

Nope the paper gasket works just fine

[@gabeallen1212]

Is there any reason after my water pump install that after test driving my engine temp shot up to 260?

[@OutJeeping]

You probably got air trapped in the system, try to burp out the system

[@gabeallen1212]

@@OutJeeping yea rookie mistake. I thought the coolent wss full but after I checked there wasnt any left in the reserves.

[@leroypalmer2308]

Perfect job well done

[@lonelystar9286]

Good video, it help me alot.🛠

[@gasperajdnik5627]

Tanks mate 😎 it helps

[@sunsetmemories8262]

I’m almost finished but I can’t get the dang ol water pump pulley off. I got the bolts off now the pulley won’t budge off the water pump at all. Any tips? 🤨

[@OutJeeping]

A good smack with a hammer

[@sunsetmemories8262]

Yea I gave it a good smack with a rubber mallet and nothing yet. I don’t wanna damage the pulley. I sprayed some pb blaster on it. It’s sitting right now.

[@OutJeeping]

@@sunsetmemories8262 Maybe try some heat too

[@sunsetmemories8262]

Wow I got it off. No heat just used a tool and was careful prying it off from behind. Rusted water pump wouldn’t let it go but I got it. Thank you again for getting back to me! This video helped me change my water pump and all. 🤟🏻🤟🏻

[@PCInstallations]

Great video, thank you!