How To Replace A Plunger In A Gravity Fed Iron

Рет қаралды 27,265

Күн бұрын

Step by step tutorial on how to replace a plunger in a gravity fed iron.
www.cleanersup...
Visit us at www.cleanersupply.com for more parts, supplies and helpful videos.
This video applies to the following products:
www.cleanersup...
www.cleanersup...
www.cleanersup...
www.cleanersup...
www.cleanersup...

Пікірлер: 28

@cynthiagilbreth1352 2 ай бұрын

Lisa, I just bought the little plunger part, from your company, of course. I couldn't believe how easy this was to replace. My iron is now working again. Thank you so much!

@nYxGoneDez 2 ай бұрын

I lost the some part long ago and thanks to this i know that its a spring ..thankfully i manage to for aome spring and finally repaired mine.

@PrettyBasicAGDevotee 9 ай бұрын

I have a brand new Sapporo 527. About an hour after I started using it tonight, the iron would not stop steaming, eventually dripping out as a fast leak. Would the plunger be the culprit for this? Any idea what would cause such an issue on a brand new machine?

@PrettyBasicAGDevotee 9 ай бұрын

whoops: turned out I forgot to install the small filter to the inside of the water tank valve before adding the resin and water. Looks like lots of resin had gotten into the plunger and must have knocked it out of place. I was able to follow your steps and clean it out and the plunger works fine now! Thank you!

@miguelmuscat2205 21 күн бұрын

How would you know,when to change the spring from the plunger???

@jeffreystickler8662 Жыл бұрын

Just checked the plunger, which was pretty simple. Spring seemed fine, but the switch does not move the plunger when tested as per instructions. No clicking sound. Is there a replacement for the switch?

@omolarafolorunso3230 2 жыл бұрын

You just save me,I was already perplexed

@grammielovestosew7797 Жыл бұрын

Sadly my Hi Steam MVP 35 quit heatingthe water. I cannot afford a new setup. The iron is still working. I received a list of repairshops all in other states. Florida and Carolina not doing it any more.. What other steam generator irons do you suggest for use in all my families pressing needs.? I don't want to go back to regular irons. I am spoiled.

@MyoThantKyaw-u4n Жыл бұрын

I have a one like that , plz explain me , Why does the button keep broking

@gbadebogafar8645 2 жыл бұрын

Thanks for the video ma...but please how do I order for the thermostat and the knob controlling it because the knob is broken and thermostat is stiff...thanks from Nigeria

@22ShadesFashion 2 жыл бұрын

Thank you. This is great.

@mcmugged 2 жыл бұрын

Thank you for this video. I just replaced the spring and plunger, although it wasn't as easy as it should have been. The top nut was so tight it unscrewed the whole part from the iron. I had to use a vise to eventually unscrew the right part and it was a pain getting the bottom part screwed back in. Anyway, I am now getting steam from the iron but I hear a buzzing noise each time I press down on the button. Is that ok?

@BarbaraAsaah-vx4vz 4 ай бұрын

How to make the vapor come out

@lfuentes4098 2 жыл бұрын

Hi. Do you have any videos on how to troubleshoot an iron that wont turn on? Thanks?

@miguelmuscat2205 Жыл бұрын

My question,is ,some water is coming out from the hose nipple ,close to the plunger part when steaming

@lfuentes4098 2 жыл бұрын

Hi do you know what part should be replaced if the iron is not heating?

@richardfortenberry6165 Жыл бұрын

Sapporo iron black wire in back I see three , one to pump A ground left alone.

@RanjeetKumar-yb6ei 2 жыл бұрын

🙏 mem mery pas bhi yhi prisc h or usny steem bnana bnd krdiya h usko kys thik krna h ap mujhy bta skte ho

@homesteadluxury5239 3 жыл бұрын

Does anyone have a temperature chart for the dial on this iron? I've been searching for days and I can not find specific information.

@Indianpolitics24AB 3 жыл бұрын

How to change thermostat in this iron

@Teewriter 4 жыл бұрын

How to attach the hose? It’s a tight fit.

@dewirosshartani5112 3 жыл бұрын

Saya pernah punya tetapi saat dipakai uapnya sedikit dan tombolnya koneksi ke uapnya lama keluar juga temperatur tidak fungsi bagaimana cara mengatasinya? Mohon maaf saya pakai bahasa indonesia karena bahasa inggris saya pasif.