How to Replace a TD42 Head Gasket

[@brycecausovski3420]

your vids are helping so much you're a legend

[@HarrysBigShed]

Thank you Bryce. It is great to hear from people like yourself. Cheers Harry

[@justforkiks29]

Are the lifters located under the cylinder head? Or can they be removed with the cylinder head still on?

[@HarrysBigShed]

The lifters are in the block I think I have no idea how they come out especially with the head on. The Skid Factory channel has recently posted up a series on rebuilding a TD42 that’s pretty comprehensive. Thanks for watching

[@justforkiks29]

@@HarrysBigShed Thank you for the info.

[@ianpotter1253]

Did you manage to get the inlet manifold welded up, as usual well done. Need to feed the boy up, maybe try spinach like Popeye.

[@HarrysBigShed]

I found another one Set me back 100 bucks so not the most expensive mistake I have ever made

[@jedhutchinson21]

Did you ever do the video of putting it back together mate?

[@HarrysBigShed]

I'm pretty sure I put the head back on in this video. What did I miss?

[@roderickduracktully7496]

What was the rough costs involved, my td42 is down in conpression on 2 cylinders. How long did it take roughly ?

[@HarrysBigShed]

Hi Rod It cost about $400 to get the head machined and another $300 or so for the gasket kit and head bolts. Allow yourself about 1/2 a day to get it all apart and a full day to put it all back together once you get the head back from your machinist. Thanks for watching Cheers Harry

[@lincolnredmond8650]

hows the td42 going now?

[@HarrysBigShed]

Happy New Year Lincoln I'm going to be replacing the injectors soon as at least one seems to be leaking down over night and then I will send it off for tuning. It runs hot under load and I suspect that it is getting too much boost. I will post up a video when it is done. Thanks for watching

[@ianpotter1253]

Harry, Hurry up.

[@ianpotter1253]

Harry, hurry up.

[@HarrysBigShed]

I’m doing the best I can m8