How to Replace Alternator 2007-2017 Ford Expedition

Buy Now!
New Alternator from 1AAuto.com 1aau.to/ib/1AEA...
This video shows you how to install a new alternator engineered specifically for your 2007-2017 Ford Expedition. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
This process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition
Tools you will need:
• 10mm Socket 1aau.to/obna/1A...
• 13mm Socket 1aau.to/obHJ/1A...
• 8mm Socket 1aau.to/obna/1A...
• Trim Tool Set 1aau.to/oaiK/1A...
• 1/2 Inch Ratchet 1aau.to/oapB/1A...
• Ratchet 1aau.to/obK8/1A...
• Torque Wrench 1aau.to/oaQk/1A...
• Gloves 1aau.to/oasi/1A...
• Safety Glasses
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@royclennan9870]

Thank you for this video!!! I was concerned that it was going to be a convoluted process to change my alternator in my 2010 expedition. After watching this video I did it in 30 minutes. I’m glad you folks take the time to do these videos.

[@kaosxunlimited5011]

Why are you using neuton meters as a torque measurement? Why not just use ft-lbs

[@AN-12345]

2:00 Great video! My 2008 was slightly different, it had 4 bolts for the bracket (no nut and stud) and the nut for the top cable was 10mm, not 13.

[@ktaylor6629]

TRQ, thanks to your video I was able to successfully replace my alternator in no time. Much appreciated!

[@tammyphillips1018]

Man you Rock

[@josefranciscoesquertalaman3827]

Presente en las aventuras de mecánica automotriz en TRQ Mirando en pantalla grande de KZbin en Navojoa Sonora México 🎉

[@TRQ]

+Jose Francisco Esquer Talamante Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@aaronlincoln4836]

Great video. Thanks!

[@ultramanxk7]

❤

[@paullorenz6457]

Thanks!