Very well done! Perfect quality! I’m thoroughly impressed on how quickly you were able to complete the process
@Ayyy-lmao9 күн бұрын
Cheers for some reason for the life of me i couldn't work out how to get the cover back on it properly
@youaresmart8312 жыл бұрын
Thanks mate.. This video helped me decide to buy a Clipsal as well as helped me in the installation. Cheers.
@imransfanchannelaustralia33873 жыл бұрын
Perfect video! Really enjoyed it.
@tuberau Жыл бұрын
Thanks mate, I was struggling to get the cover off, your video helped 😊
@Lane-o6oАй бұрын
Nice video, Great job. Theres a 200mm Lenco Exhaust fan from the 1980s? That I am looking at removing, This video was very helpful
@clogdacoolalt17742 жыл бұрын
My auntie has 2 airflow exhaust fans in her house and they have white blades and are very good. One of them is the same size as yours and the other one is small
@willpower35442 жыл бұрын
This one is the smaller size.
@phoenixjorge523111 ай бұрын
Thanks mate big help and very straightforward.just replace mine after watching your video cheers
@lachlanslightsandfans3 жыл бұрын
Good video, that hpm has done well, they barley ever last that long especially that style 2. Good choice with the new fan
@willpower35443 жыл бұрын
Yeah like I said something with the bearings messed up. The motor was also really rusty. You’ll see it at another point tho I’m Not going to throw it out
@lachlanslightsandfans3 жыл бұрын
Ah yeah
@perthtransportguyz2 жыл бұрын
I have him style 2 still going strong in my house since 2007
@yeoobabab4043 ай бұрын
I like your Australian circular exhaust fans
@LightsandFansGuy19993 жыл бұрын
You have earned a new sub! You make good content!
@willpower35443 жыл бұрын
Thanks mate! I’m guessing you’ve looked some of my other videos? 😋
@LightsandFansGuy19993 жыл бұрын
@@willpower3544 yeah I looked through your videos.
@drpeemac Жыл бұрын
you forget to keep dust cover duct, dust will devour your attic mate...
@JS501084 ай бұрын
Simple and Straight Forward video. Thanks mate. How about Deta brand at Bunnings in 2024??
@willpower35444 ай бұрын
If Bunnings is your only option, do for heller or click. Don’t go for deta or hpm or ventair. If you can go to an electrical wholesaler and get a Clipsal airflow, they will sell you them.
@JS501084 ай бұрын
Thanks for the quick reply. We had Airflow ones. They are a bit noisy I guess. Clipsal is available near my place in Melbourne. Do they have bush or ball bearings??
@willpower35444 ай бұрын
@@JS50108 they have bush bearings, and will usually last 8-10 years before they start going noisy. You can clean the bushings out with wd-40 and follow it up with some chainsaw oil or sewing machine oil which may take care of the noise.
@JS501084 ай бұрын
It says Deta expels 450 cubic meter air but clipsal expels 358 per minute ???
@JS501084 ай бұрын
Thanks. I tried with spray grease but it’s still noisy. It was installed in 2008.
@manchester11162 ай бұрын
Do you know Where to you get the duct cone that goes on top of the exhaust fan? great vid btw
@perthtransportguyz3 жыл бұрын
you can get clipsal at bunnings
@willpower35443 жыл бұрын
no. you can only get rubbish at bunnings. I got this from MIW.
@perthtransportguyz2 жыл бұрын
Ur other channel??
@tamstar756 Жыл бұрын
Easy to understand.
@ps6772 Жыл бұрын
Video starts at 01:20
@Ampersand19882 жыл бұрын
Put some RGB fans.
@clogdacoolalt17742 жыл бұрын
These HPM style 2 exhaust fans are terrible but the other ones are good. That one looks disgusting especially the cover.
@sunriseboy48376 ай бұрын
Thank you. Good demo. But how do you wire the fan to the power. Do you have to get a sparky in for that?
@willpower35446 ай бұрын
They just plug in there’s a socket in the roof. I show it in the video
@sunriseboy48376 ай бұрын
@@willpower3544 I suppose I'll have to get up in the roof cavity and see if there's a power point up there. I doubt it.
@tyelowe46632 жыл бұрын
It was an airflow
@willpower35442 жыл бұрын
what?
@tyelowe46632 жыл бұрын
@@willpower3544 The new fan.
@willpower35442 жыл бұрын
@@tyelowe4663 yes i said that its a clipsal airflow.
@perthtransportguyz2 жыл бұрын
what are the other fans in the house
@willpower35442 жыл бұрын
I don’t live in the house anymore. It had two other exhaust fans both Ventair and a stainless steel ceiling fan outside.
@perthtransportguyz2 жыл бұрын
@@willpower3544 have you moved into the new place BYW what does a ventair looklile
@willpower35442 жыл бұрын
@@perthtransportguyz not yet there will be videos. There’s other videos on my channel.
@carsonsluss4312 жыл бұрын
Where can I buy this replacement in the United States?
@willpower35442 жыл бұрын
I wouldn’t know, I’m not over there. It’s an Australian fan by an Australian company. I don’t know if you have Clipsal over there. I would say the only way to get one over there would be to find someone who will ship one over there.
@carsonsluss4312 жыл бұрын
@@willpower3544 Thank you
@beebee5633 Жыл бұрын
Are you an electrician?
@willpower3544 Жыл бұрын
Yes but at the time of filming this video I wasn’t. You don’t need to be an electrician to change an exhaust fan tho. It’s just a plug , as shown in the vifeo
@beebee5633 Жыл бұрын
@@willpower3544 Thanks, but I have found a typo in your reply.