How to Replace an Insinkerator Badger 5 Garbage Disposal by

InSinkErator Badger 5 Garbage Disposal
Amazon: amzn.to/2xhBZOi
Home Depot: go.magik.ly/ml/161vi/
www.gettinjunkdone.com
Please comment, like, subscribe and share!
You can also fine me on Twitter & Instagram - @GettinJunkDone
Use this link to shop on Amazon, while supporting the channel!:
www.amazon.com/shop/joerobins...
Bugout Truck Build: • Bug Out Truck Build by...
Tool Reviews: • @GettinJunkDone Talks ...
#Insinkerator #GarbageDisposal #ReplaceGarbageDisposal

[@GettinJunkDone]

Hey Everyone, thanks for watching! If you like this video, you might like some of my others. Consider SUBSCRIBING!

[@yukuhana]

Pretty helpful. Thanks! I just replaced one today. One tip for everyone which was missed by this video is that, you could screw the L-pipe in first before securing the unit to the sink bracket. This would spare you from struggling to install the L-pipe behind the unit out of sight.

[@GettinJunkDone]

Good advice!

[@Burps___]

Or, just use the old L-pipe and simply replace the gasket which comes with the new model. Never fool with the old L-pipe or PVC connector at all.

[@simonlebon2022]

I watched your video and was able to replace it myself, saving a few hundred bucks not having to hire a plumber. Thank you!

[@GettinJunkDone]

Hey, thanks for the comment! I'll be addressing this on my Live stream later tonight. August 30, at 7 pm EST.

[@sanjayshankar]

Thanks for posting this! My erator started leaking yesterday and yours was one of the videos that broke it down simply and gave me the confidence that I could handle this job.

[@dcool2u2]

So refreshing to watch a how-to video that quickly shows the steps without a lot of explaining. Given sometimes that's needed, but in this case I really appreciated the pace! I saw everything I needed to know in a fraction of the time! Best one I've seen! Ready to get a new disposal and install it! Thank you!

[@GettinJunkDone]

And that is what it's all about my friend. Thanks for the encouraging comment. I'll be using your comment during my Live Stream this Sunday night, Episode 36. Hope to see you there.

[@dcool2u2]

@@GettinJunkDone Cool! I'll tune in!

[@traceywilliams9491]

Your video saved this single mom an expensive call to the plumber - thank you so much!!!!!!!!!

[@namehere4954]

I had a Badger 5 and was able to use the same top mount for the Insinkerator Evolution Select Plus. All my connections aligned just fine as well! Going to save new top mount for when I remodel kitchen and get new sink. Thanks for video, super helpful in removing my old unit!

[@jdotwall]

This video is phenomenal, I was able to follow the video step by step and my new garbage disposal is on point . Thank you very much . I have no prior experience and got the job done .

[@capodecapi23]

Thank you, this eliminated a lot of stress as to what I needed to buy getting the exact sane one! Righteous brother! Keep up the good work!

[@troybailey4225]

a nice refresher. Installed my original disposal 12 years ago. Started leaking like crazy the other night.....time to replace it. Thanks!

[@Sundardevsaha-e3k]

Super helpful. I loved the intro. Haters gunna hate. You did me and a lot of people good by posting this. Thank you.

[@s0nlxaftrsh0ck]

Thank you so much for the this video. I was a bit fearful I would mess this up immensely but I toon another look and it was only a few hook ups that needed to be removed. Fast and easy honestly. Thank you so much!

[@RussShirley1]

Thanks for the heads up, replaced my Badger 5 like a pro thanks to your video!

[@GettinJunkDone]

Glad it helped, thanks for watching!

[@dsmith1543]

Thanks man! With the help of your video, I was just able to change out my broken disposal. Much appreciated!

[@Citizen.Grey.Arms.]

Thanks! I had one go bad and have never inatalled one before and you saved me 100$ for an install

[@Standdividedfalltogether]

Thank you bro. Saved me $150. Only took 40 min and the new one works like a champ. Appreciate ya. Happy holidays.

[@danfloirendo6916]

Thanks. Had all steps done and couldn't figure out how to get it from the drain housing. Thanks for making the video specific to this mounting system.

[@GettinJunkDone]

Glad it helped!! Thanks for watching.

[@rebekahedwards1787]

Thanks! That hammer trick to remove the old disposal unit was genius!

[@tageuhl6422]

A glass juice glass slipped out of my hands and fell into the disposal. Your instructions were great! I was able to remove the disposal and the seal on top to retrieve the glass unbroken. Hooked everything back up, no leaks and we are good to go. I now know I’ll be able to change unit out when it fails. Thank you!

[@GettinJunkDone]

Good work! Glad it helped!

[@guycintron5696]

Very helpful video!!! I just replaced the same badger 5 that lasted 20 years with a badger 5xl and it was the same flange. Super easy!!! Thanks!!!

[@DrMcampbellDC]

Great video and I love the comments and tips from your viewers. I’ll be checking out more of you videos. I have a lot to get done!

[@THEelduderino]

Great video & most applicable retry application, Badger 5 is highest selling disposal in the US. Perfect step by step walk through & details in text where important (turn off elec breaker, punch dishwasher plug, etc). People who are 👎 on this video just aren’t handy, don’t get it & need to pay someone. Thanks for the vid

[@GettinJunkDone]

Thanks for the kind words!

[@ludvigtande1236]

I installed without knocking out the dishwasher plug. Forgot I had to. Your vid saved the day👍

[@GettinJunkDone]

Hey, thanks for the comment! I'll be bringing this up during my live stream later tonight. Episode 21, Nov 8, 7 pm EST.

[@cordp2735]

Thanks for the video. I was standing in Lowe's waiting for an employee to go talk to another employee that might have replaced a garbage disposal. I punched it into KZbin, your video was fist and short. I watched. I didn't wait for the guy to come back. It is in and working just fine. Thanks again.

[@4554242]

Thank you very much!!!! First time I changed a garbage disposal. Thanks for doing it step by step. You rock!!!!!

[@GettinJunkDone]

Hey, I'm glad it helped! That's the whole point of making these videos. I'll be discussing this during my live stream tonight at 7 pm EST, Episode 26. Hopefully you can make it!

[@undrtow0515]

Brother thank you so so much! I was gonna strip the whole thing down and you made this so easy for me!

[@GettinJunkDone]

Glad I could help!

[@1jlupe]

Thank you so much sharing your knowledge, so helpful, blessings

[@GettinJunkDone]

Thanks for watching!

[@michaelpope4499]

Brother you are the man... Thanks a million. Followed your video as I did it. Thank you so much 👍🇺🇸😷

[@dd317676]

thanks so much!! with you help we were able to replace our broken garbage disposal!

[@GettinJunkDone]

Hey Domonique, thanks for the comment. I'll be bringing this up on tonight's live stream. Episode 18, October 18, at 7pm EST.

[@SEVENofTHEM]

Great video! Same unit I’m replacing. Thanks 👍🏼

[@papamrk1343]

Bro, I literally just installed my INSINKERATOR 500 replace a 5 all hardware is the same. Did exactly as you did... Thanks for the NO BS video!!!

[@GettinJunkDone]

Glad it helped! I'll be using this comment during my Live Stream tomorrow night, Episode 29, at 7pm EST. Hopefully you can check it out. Thanks!

[@factorialhydra3056]

My Badger 5 died in February and I was just living with it until I could get a plumber in post-COVID. It never occurred to me that it would be so easy to replace myself with a $100 part from Amazon. Thanks for the video!

[@humanentity2214]

How much did the plumber charge?

[@reddawn0723]

Nice! Thank you for sharing....Now off to changing mine. 👍

[@nodnarb511]

This was an extremely well done video. Saved me easily $200

[@iviaqua]

Thanks. We replaced ours today. God bless you.

[@vanpediem7641]

Done! Appreciate the straightforward vid.

[@ManganeseMan]

outstanding format, not alotta talking just doing! thanks for posting...doing one today. may wanna warn folks to ensure the power is off!!!!! thank you! good jams too!

[@dartmaster501]

Great video. Watched it once and was able to replace my disposal very quickly. Would've taken less than 30 minutes, but I got one without a plug and had to go back to Lowes. Then cord I got didn't have black/white. It had grooved=neutral and smooth=hot.

[@tinagasson3796]

Thanks I had a new badger garbage disposal to replace my old one and the man for got to take out the plug for the dishwasher drain ,after your video I knew where to look . I took out the plug and it was all good news the dishwasher drains now.

[@mayscocopatch]

Thank you so much. You made it so easy to do. 🙏🏽

[@drunkaquarian]

Thanks. Pretty easy install

[@hueypham7021]

Thanks for the video. very helpful

[@BG-eb7qu]

Brilliant, high-speed!!

[@GettinJunkDone]

Thanks!

[@scottgallegos4920]

Thanks this helped me so much wife even helped, Didn't have to change the top part above disposal, New one screwed right on the spot the old one came off. Don't forget to remove the plug if you have a dishwasher i forgot but caught it in time.

[@90thBG]

Outstanding step by step!!! Thanks

[@GettinJunkDone]

Glad you liked it! Thanks for watching!

[@thebidendotwin2926]

Thanks for this!!

[@AdamsHadEnough]

Hell yeah brotha, my 10yo Badger 5 died this evening. You sucked me in with your video's 5:55 run time and showed me that changing a Badger is dead easy. I hope you are living large off the proceeds of this video!

[@metaltera86]

Thank you. I am just having to remove my sink for installing new countertops and needed to know how to remove the disposal

[@ebiedog]

Thanks for the video! Very helpful!

[@tootsiejoon]

Thanks for the video. I just replaced mine same model and it was relatively easy! I did the same thing got the same model to eliminate headache. The old power cord was not black and white it was all gray except the green ground wire so I just connect the black wire to gray and white to other end of gray and green to ground and closed it up and plug everything in and everything works well. I don’t think it really matters Which wire connect to which as long as the green wire is connected to where supposed to be connected. Right??

[@markking6222]

Thanks for this video! Just finished replacing mine instead of calling out a plumber.

[@jonathanhall7832]

Thank you for this video my friend ! Got it done.

[@GettinJunkDone]

Good work! Glad it helped!

[@michaelgilardi5952]

Plumber came in this morning asked for $950 for a clog and change. Glad I found this video well done dude!

[@GettinJunkDone]

WHOA! Glad it worked out for you and you were able to save some money, good work! Also, I plan to use your comment and discuss this further during my live stream tonight, Episode 47! Hopefully you can check it out.

[@kennethpearce725]

Thanks! Great video. I feel a whole lot better about doing this job.

[@GettinJunkDone]

Easy peasy!

[@bulldawg1964]

@@GettinJunkDone I did it!

[@pablovagnor]

🤘🤘🤘🔥🔥🔥. Literally showed everything !

[@iamthereforithink2323]

This was very helpful to me. Thank you!

[@iamthereforithink2323]

fwiw i am not all that handy, and it took me about an hour and a half. i was replacing a similar one and did not have to replace the sink part that the disposal hangs from.

[@heroknaderi]

I Enjoyed watching thanks.

[@robbarnes4744]

Thanks! All done!!

[@trentonschmale9745]

Great video! Thanks for posting it. Made the job a whole lot easier. FYI: I upgraded from a badger 1 1/3hp to a badger 5xp 3/4hp and all the fittings are the same. The badger 5 is just a little longer in length.

[@GettinJunkDone]

Glad it helped!

[@DarkSideOfTheBrightSide]

This video literally saved me, lol, my uncle had me doing it all wrong.. and, he’s a plumber.

[@GettinJunkDone]

I'd caution you to listen to my advice over a plumber, when it comes to...plumbing.

[@genebest]

Thank you! It's helped a lot!

[@GettinJunkDone]

Hey, thanks for the comment! I'll be bringing this up during my live stream later tonight. Episode 21, Nov 8, 7 pm EST.

[@Supaman2you]

Thanks about to do the same thing 👍

[@acratone8300]

A step stool under the disposal when screwing or unscrewing the collar will help not having to lift or lower the heavy disposal so far while lining it up straight. A screwdriver might not be able to apply enough force on the hose mounting screws so a socket will also fit the hex screwheads allowing more force.

[@TheBoxBox920]

Acra Tone can you explain this like I’m 5 years old please, sorry

[@acratone8300]

@@TheBoxBox920 A Badger 5 is heavy, when twisting it on or off the collar, and can be tricky if you are lying on your back and reaching upwards to the sink. Therefore placing a short step stool (about 8 to 12 inches tall) under the sink connection will help raising it and lowering it only a short distance as you try and line it up to twist the Badger onto or off of the collar. Or something else to act as a platform if you don't have a 'step stool'. The hose connector screws are slotted hex. A slot screwdriver will not put much force on the screw. A hex wrench (end wrench, or socket and ratchet with short extension) will make the job much quicker. Also it will allow tightening the screws tight enough where they won't leak. Badger makes a flexible pipe that bends and expands to match the disposal outlet to line up to your pipes. InSinkErator FDT-OO on Amazon. FDT-OO can be pushed to make it shorter than your old connector pipe, or pulled to make it longer than your old pipe. It also bends to move it up/down or sideways.

[@_David_Kong]

Good Vid..right to the point.

[@fredlamprey8824]

Great video. My 1994 1/2 HP Badger 5 model finally died last week. Will do the install myself and go with another 1/2 HP Badger 5. Nice to know that in going with the same model, should not have to deal with the attachment that attaches it to the sink. One thing, on mine, the power cord appears built in. I just plug it in to the electrical outlet under the sink. Will see what the new model is like.

[@GettinJunkDone]

Hope it worked out for you!

[@gmgraphics4733]

Thanks I was about to take apart the whole drain attachment not knowing that all I had to do is slide the old one off.

[@elchile007]

GM Graphics I was going to do the same thing. Thank god I saw this video

[@scottgallegos4920]

Mine was the same way easy.

[@LeoCampos2]

Thank you very much for this video, I was able to do by myself! Won't have done without it.

[@javiermartinez-ge8ss]

Thank you so much for this video it helped me alót

[@camdogs1]

Thank you!

[@thejbwood003]

Thank you

[@jasm.5823]

Tip: Unscrew the P-Trap on both ends to be able to remove the disposal unit without having to reach back and unscrew the pipe adapter to the unit. That's why the P-Trap has 2 screw ends. After you mount the new unit, you then reassemble the p-trap.

[@mnforager]

Thanks for your comment. Saved me a lot of time tonight

[@bryantbrito2467]

Thanks for the vid. I'm going to try and do this a llttle cleaner

[@isaaczuniga458]

Thanks!

[@GettinJunkDone]

You're welcome!

[@drobinson9068]

So I'm doing the dishes at 10:00 PM. Shoes are wet for some reason. Crap...something is leaking. Check under the sink and find my Badger 500 is leaking like a sieve. I hop on KZbin to look at my options. I watched a video of a badger 5 to badger 500 replacement and it was terrible. The guy explaining the process had no business doing this relatively simple job. Your video started playing automatically right after his crappy video. I was cracking up when I heard "hey guys, Joe back again with another episode of gettin junk done" thanks for tips in the video. If I run into trouble I'll call you or your pop!

[@TheSonicSegaNerd]

Gotta have that rock music in the background to remind you that you're a MAN 😂🤘

[@golftitan]

Do those new gaskets come with the Badger 5 or do you need to purchase them at home depot or somewhere? Mine is hardwired like this one but I see those that advertise they have a cord. Do you just take that cord off and hardwire it or are there corded and not corded ? Thanks

[@ToddUGA]

About to replace mine and it looks pretty simple. Thanks for the insightful video. All the thumb downs must be from plumbers mad because you're costing them money. :)

[@GettinJunkDone]

Hey Todd, thanks for the comment. I'll be discussing this during my live stream tonight at 7 pm EST, Episode 26. Hopefully you can make it.

[@ElevatorWasher5000]

omg thanks this is the same one I want in my house

[@GettinJunkDone]

There you go!

[@Willee64]

I am a fairly savvy DIY'er but have never replaced a disposal before. After watching your vid I said to myself "that isn't difficult at all". I just ordered my new Badger 5 and should be here tomorrow. Same model is definitely a HUGE help. Thanks for your vid!!! It was a great help!!!

[@emiltchilev9026]

Question - is it allowed to run a visible white wire in a kitchen cabinet at all? For example a transformer for LED below the kitchen sink? Danger from possible leaks and mechanical damages?

[@CardiacCat]

This is easy folks. YOU CAN DO IT!

[@chank28]

Just replace mines today! Just wanted to say thank you for a great video! It was so easy and saved me some money! Dilly Dilly!

[@Choom2077]

My Insinkerator Badger 5 came with the top drain assembly. But I noticed in many vids, people never bothered to replace those parts. Is it not necessary to do so? My current sink drain assembly happens to be another Insinkerator model, so I supposed I wouldn't need to take that apart either. Thanks for the upload @Gettin Junk Done.

[@GettinJunkDone]

A professional plumber might tell you otherwise, but I never have and everything has been working just fine. Thanks for watching!

[@Choom2077]

@@GettinJunkDone Thank you so much. I was able to put it together without any problems, much thanks to your video tutorial help!

[@denniss3980]

Good video, My 11 year old Badger finally started leaking water out the bottom, I guess 11 years is really good for this model so can't complain to much, I would just go without one but planning to sell soon and most buyers want a working disposal

[@tygerst4589]

Followed you exactlty and it worked exactly like yours, Thanks

[@LIG87]

4:07.. i have a dishwasher but i have 2 sinks...my dishwasher empties out in the sink plumbing opposite the garbage disposal sink so i dont need to pop that piece out right?

[@TheBoxBox920]

LifeIsGood I have the same question, does anyone know the answer to this please

[@MrMrsteve01]

What did you do with the grounding wire?

[@crphilly28]

I'm glad I saw your video. My insinkerator die and I replaced it myself following your video. Thanks a alot!

[@GettinJunkDone]

Hey Philly, thanks for the comment. I'll be bringing this up on tonight's live stream. Episode 18, October 18, at 7pm EST.

[@mizarkd]

Thanks for the video. Definitely made replacing my disposer much easier. One thing! My new Insinkerator Badger 5 (3/4 hp) came with a hex tool. Instead of hammering out the old machine from the universal connector, the tool can easily be used to remove it, as per the installation guide. It was much easier than hammering (which did not work for me).

[@tfinvold]

I have this exact one and for reasons unknown although it still works the old one started leaking like a siv and began pouring water out of the bottom despite all connections being good.

[@GettinJunkDone]

Yeah, that's weird!

[@spoonbender123]

Same here bro, no reason except for age. It just started leaking but after 10 years. The warranty is 3 years. Okay, time to replace. Thank you.

[@kennycybertron1]

There is seals in the motor housing rust out and that allows water to flow downward right out the reset button.....there is a reason for only a 2 yr warranty. I replaced this exact model with the same model after it lasted 8 years of daily use. Badger is great

[@plugger4945]

Tyler Finvold if it does that,REPLACE NOW!

[@shannonfritsch6647]

Mine is leaking out the bottom as well, gonna go this rout as well same same but mine comes with a cord, i havr an outlet underneath my sink easier. Thanks for the vidioe

[@Vazter]

Thank you so much for the easy instructions

[@janesara7210]

If my husband had just watched the first minute and 13 seconds, he wouldn’t have freaked out when the dishwasher wouldn’t drain. 😂😂😂

[@topcat3149]

Guess what I'm doing today? Just guess :-) Thanks for the quick and simple video.

[@GettinJunkDone]

Good luck!

[@topcat3149]

@@GettinJunkDone I got it done no sweat, thanks again for posting your video. It was a huge help.

[@mrjcbuc]

So, i'm replacing my cheap, 1/3 builder model (g.e.) I think, with a badger 5 xp 3/4 horsepower model. It has a power cord. Can I expect the fittings to be the same where it connects to the sink? Am I going to need plumbers putty and that sort of thing?

[@acratone8300]

InSinkErator/Badger makes a flexible bellows like pipe that connects to the disposal very much like what you see in the video. But the other end of that flexible pipe is expandable (make it longer or shorter) and bendable (flexes and bends to move it up down left right and anything in between). That little adapter will allow for the difference from one disposal (which may have a narrow body and outlets in slightly different place) to your new disposal (which may have a wider body or be taller shorter, have connections not at exactly the same place). The flex pipe allows for all of this very quickly and easily. Provides a quick way of connecting the disposer discharge to the drain line. Retracts and extends 6 to 10 inches. Forms tight right angles or slight angles to meet existing 1 -1/2 inch drain plumbing InSinkErator FDT-OO Flexible Discharge Tube Amazon, eBAY, home hardware supply stores all sell this item. www.amazon.com/InSinkErator-FDT-OO-Flexible-Discharge-Tube/dp/B00084U29C

[@ronjohnson1512]

Curious to know answer, as I have the same 1/3 hp badger and want to go up to badger 5…

[@GoodmanMIke59]

Would have gotten the same one (Kitchen Aid), but 20 years old. "UPDATED" ... 2 weeks. Bought the Badger 15 ... gonna go NON-BIG BOX and check before I install.

[@quabledistocficklepo3597]

FINALLY, I think I got it, the part at 4:26 where you attach the garburator (I like the Australian word) to the sink. My mistake had been in trying to line up all the "loops" on the metal ring attached to the garburator to the hooks on the metal attachment to the pipe coming from the sink before rotating it clockwise. It also helped to run the video speed at 1/4....several times. Well, I never claimed to be a mechanical engineer. LATER: I still can't do it. I can't line up the parts so that they will be engaged when I give a hammer tap. I don't understand why I'm having so much trouble, because I have done this before.. Well, I'll be back. The damned thing's heavy. Sun Feb 28, 4:42 PM: AMAZING!!! I bought a scissors jack for only $18.00 It works fine, and certainly removes the main difficulty: holding the damn thing up to make the connections, but I STILL can't line up the parts. Well, I don't have much patience with these sort of things, so I'll try again tomorrow. Somehow, this reminds me of Macbeth: Tomorrow, and tomorrow, and tomorrow creeps in this petty pace until the last syllable of recorded time....Now that's high class plumbing. I'd prefer successful plumbing, though.

[@quabledistocficklepo3597]

(Thu Mar 4, 1:26 PM): I shouldn't be haven't so much trouble. I must have damaged or lost an important part while removing the disposer. Anyway, I'm now trying to remove the parts that go through the sink itself. You know, the round stainless steel part that fits flush with the bottom of the sink, and the part under the sink that connects to the pipe coming from that part. I can't separate the two right now. Am I supposed to be able to unscrew the lower part?

[@quabledistocficklepo3597]

I removed my Badger 5 1/2 HP garbage disposer from my sink,, but I have not been able to put it back. I've tried many times, but I always fail. However, if I can't succeed today, i will buy a new one on the theory that I must have damaged the old one while removing it in a way that prevents me from reinstalling it. Here are the precautions/steps I think I've been taking and will certainly use again: (1) Make sure the unit is directly under and centered with the connection above (2) Raise the unit as high as possible before trying to connect it with the above connection. (3) Make sure that the unit is as level as possible (4) Proceed slowly and carefully (OF COURSE!) (5) Align the parts in question exactly as you show in your video.In other words, rotate the part until it is in the same position in relation to the part above as is shown in your video. Thirty minutes from now, I'll be smiling or ordering a new Garburator from Amazon. I will not delay one-minute beyond that. It's already been too long. Of course, I don't need a garbage disposal and never have, but I am not taking the easy way out by just reconnecting the plumbing WITHOUT a disposer) No, I'm in this battle to the end. (Sun Jun 6; 4:00 PM PST)

[@quabledistocficklepo3597]

Okay, that's it. I failed again, and I really tried, repeatedly. the only interruptions were when I watched the attaching sequence twice, with full screen and slowest speed, The only thing that made me think I had a chance was when you failed on your initial attempt. (The part you were rotating was forced into an un-level position. Thats what happens to me when it doesn't just fail to engage at all. Well, that was my last try. I'm now ordering a new Badger from Amazon. As I recall, this.model costs about $85,00.WHAT A RELIEF!!! (SUN Jun 5; 4:40 PM PST)

[@quabledistocficklepo3597]

The price, including shipping and tax, has increased to $108.40.It's still a relief.

[@KwamZZZZZ]

I can’t even take off the dishwasher pump and it meant to follow this so bad. Mine is with some wire thing that won’t come off

[@hellbent7066]

Thanks. I appreciate the video. However, I did upgrade from the Badger 5 (1/2hp) to the Badger 900 (3/4hp) because they both hooked up the same and the 900 model was on sale at Home Depot and actually cheaper than the 5. But the biggest plus was the 5 only had a 2 year warranty but the 900 has a 6 year warranty. I just switched them out. After watching your video it turned out pretty easy.

[@GreenMountain565]

One quick thing I noticed. It appears that the drain coming out of the wall is higher than the discharge on the disposal. This will create a situation where the disposal will hold water. To fix this correctly that drain line coming out of the wall needs to be lowered 3-4 inches.

[@ill2daMAX]

100% AGREED! I was looking in the comments to see if anyone else caught this!

[@jamesd.2856]

I am one of those people that need to go step by step with vocal instructions. While I am sure you did a great job and did it right judging by the comments, I could not get past the music. It, for me at least was very distracting and personally was not a great choice. I really wanted to get through it but could not. Anyway, again I am sure you did a great job but I had to find another video. Have a good day.