How To: Replace Can Am Starter G2

[@Rokonroller]

I replaced mine through the right side. It took longer to remove the plastic than it took to remove the starter Mine was dirty, cleaned it & dabbed silicone grease on the pivot shaft & works like new.

[@vlad_podlesny6562]

did you not completely remove the entire variator?

[@Rokonroller]

No I accessed the starter from the right side of the machine (Can Am 1000 G2 outlander) 2016 model

[@dws5951]

I missed the solenoid install ...where did it go/fits where???

[@marklubecke4854]

Did you ever find out the location of the solenoid???

[@marklubecke4854]

Would it be correct to say the clutches don't have to be removed? The clutch cover can be left alone?

[@muddyducksatv1501]

You make it look so easy. Good job. Like how simple you make it.

[@DirtyLensVisuals]

It's not a bad job to do lol just VERY time consuming

[@muddyducksatv1501]

@@DirtyLensVisuals I want to change my belt to a Mavrick belt. The video shows it well.

[@38baby2snippetz5]

@@DirtyLensVisuals what made you change your starter. I think mines going out

[@DirtyLensVisuals]

@@38baby2snippetz5 When I was riding if I cut it off and tried to crank it back it would act like the battery was dead but when I checked the battery it was showing 12 volts.

[@38baby2snippetz5]

@@DirtyLensVisuals yeah mines doing the same! My battery is not keeping a charge

[@SomeDamnfoolsAtv]

Awesome video! A great how to!!!

[@garrettrang5793]

How about you show where the starter bolt is held on seems like a pretty critical step to just barely mention? Does the cover need removed, i sure cant see any other bolts? The only reason i watched your video and its not here

[@joeshuge]

It's on the other side. What would be nice is if he showed how to get the clutch off, to get past the shroud.

[@T-K---]

What was wrong with your starter?

[@kevinmontgomery1578]

Dude I had two of my bolts on the cvt cover strip out and it's the only thing I could think to do is run some black rtv and a washer and nut it works better than a 300 dollar back plate and an annoying amount of work

[@nathanbroomfield4953]

Same process for the commander?

[@dylansimmons8027]

great background music

[@drakex7566]

can you drop link to starter or brand

[@Rokonroller]

Denso

[@TheTaylor12321]

Where is the starter bolt to be exact?

[@mikegarrett3815]

Wow those clutches are very dirty!

[@spot50]

I wasn't able to find where the screw head is on the other side of the machine. It's a Defender

[@ayedhatyaygo983]

Thanks

[@treverjames1186]

Wtf is wrong with can am for making it so difficult to replace a starter ???

[@tonyg315]

It's not. I just removed mine from the right side of the atv in 20min. Removed running board then the 10mm bolt to the starter and popped the starter out 🤷🏼‍♂️

[@vlad_podlesny6562]

@@tonyg315 could you post a video on how to remove the starter?PLEASE!!!!

[@deerhunter8533]

Hah?