HOW TO Replace Cold Side InterCooler Hose | 6.7L Power Stroke F-250 | Mass Air Flow High P00BD

[@adamvelek8321]

Outstanding Job! Had a check engine light on my way home. I scanned it and got the P00BD code. 1hr later after watching your step by step I had it fixed. Good work, much appreciated!

[@RidgeLife]

That’s great!

[@AdamVelek]

@@RidgeLife Service Engine light has remained on, how many cycles does it typically take for it to reset? Is there something else I need to check? Thanks!

[@adamvelek8321]

Update: Service Engine Light cycled off by end of the day. 👍🏼

[@ernest3365]

😅😊

[@rethergriffin7846]

Ive had mine cycle litterally over 500 miles and 50 timee before it finally went off!​@AdamVelek

[@anthonysilva5934]

This is a master class on how to make a KZbin video. Straight to the point and no self serving bio on here. Great job

[@RidgeLife]

Thanks!

[@ZonaJim]

And no annoying music over the top of the audio! Fine job!

[@candkwarnerstroebel3974]

I got the same code at the Ford dealer and they couldn’t see me for 3 days. I work 1.5 hrs from home and so I did some investigation. Found my hose was cracked in 3 places. I got a new one. Replaced it at work. It’s running perfect. Thank you so much from this 54 yr old grandma. It was so easy to follow the video and took me 10 minutes.

[@RidgeLife]

My pleasure!

[@tonylongoria3567]

Bro! Thank you! I went to jump my buddies car and heard the air just gushing out. Look like a simple fix but that clip looked tricky. Your video was a huge help! Thank you!

[@RidgeLife]

Glad it helped!

[@miami8089]

Thank you. I just ordered mine today from Amazon. It should be in tomorrow. I think I'll try to put it on myself. Your video is extremely helpful. Thank you again,

[@RidgeLife]

Good luck!

[@1SKEEZY863]

Thank you. Your video was very informative and I changed my hose on my 2018 Ford F-250 XL in less than 10 mins.

[@RidgeLife]

Glad it helped!

[@sammyyourmammy8170]

thank you, i live in california, i needed a rear knox sensor and my truck sat at the dealership for 13 days. NO MORE!!! thanks you tube !!

[@RidgeLife]

For sure!

[@bshicks3]

Had a P00BD and your video popped up first. Mine had not damaged any lines but was leaking. Thanks for taking the time to help folks out!!

[@RidgeLife]

Glad it helped!

[@HillKingMI]

I had no engine light come on when mine cracked, but I could hear a difference in the sound of my motor when I gave it some pedal so I caught it pretty early. Thanks for the video on installing a new hose.

[@RidgeLife]

@@HillKingMI my pleasure

[@djbiddix]

Great video. Had to do mine as well last year. Wish I saw this one first. Took me about 35 minutes to do mine. All is great now.

[@RidgeLife]

Ouch!

[@steve_n_utahthediyguy9263]

I’ve own a 2015 F250 with the 6.7 L , and it had a catastrophic intercooler hose blowout. I mean like “BANG” 😵‍💫I was hauling horses up to the mountain and thought I was gonna have a heart attack. It Immediately bellowed black smoke. No place to pull over for a few , I Thought I lost the turbo😮 but Noooo It was just that hose. We appreciate you walking us through it Tim!

[@RidgeLife]

WOW! My pleasure.

[@lilahnewton7940]

Learn something new all the time!! To be honest it was you I wanted to see. Glad your well. You are greatly missed!!

[@RidgeLife]

Awe! I appreciate you.

[@riffelsrifles2981]

The piping kit is a complete piping kit, intercooler, y pipe and cold air intake. The truck is deleted and tuned which would or should turn off the EGR and throttle body damper. Put truck on livestream and it’s showing an open circuit. Tried plugging everything back in and no luck. Still zero airflow on tuner….. I am going to start am testing wires this weekend, just hoping someone has ran into this issue before and documented it. You’re the only person that’s replied in a week of scratching my head. Thank you sir.

[@RidgeLife]

Sorry! Good luck!

[@riffelsrifles2981]

Thank you

[@ZonaJim]

Here's an idea. Put it back to stock so we don't have to breathe your filthy exhaust.

[@CynBrown]

I love how detailed you are on this type of video. well done as usual.

[@RidgeLife]

Thanks Cyndi!

[@deeanderson7358]

This just popped up in my feed and I love it. I have not seen you in so long that even with this type of video is good. I have missed you. Hope you and the family is all doing well. Good to see you. I just had a 100,000 mile check on my PT Cruiser and it ended up being $1900.00 job but the car runs great and it is just me so I need to know it is a safe car. It has been a great car for me. It is a 2006 I am the only owner so I know what is what with it. a God bless

[@RidgeLife]

Yeah they sure get expensive quickly! Thanks!

[@chrissellino2829]

Excellent job of explaining problem and rectifying it!

[@RidgeLife]

@@chrissellino2829 thanks!

[@samc1058]

Thank you very much. I know this is a couple of years after the post but I got an estimate to swap out the inlet pipe at $971.00. I'm grateful for your input.

[@RidgeLife]

Glad it helped!

[@mpedmar9701]

A very informative video! Watching vehicles repair videos always reminds of my Dad. Thanks for sharing. Stay happy, healthy, hydrated and safe. May God continue to bless you, your family and your adventures.

[@RidgeLife]

Thanks Margie

[@TracyH007]

Happy to see you posting. Excellent video. Not just ford trucks experience this issue. I had no code, no lack in performance & no unusual blow by. Suddenly, My Chevy Duramax 6.6 blew the intercooler line.(the sound of poof) That was it. Left me limping my powerless truck out of a corn field.

[@RidgeLife]

Oh no!

[@TracyH007]

@@RidgeLife Easy fix as you know 💙.

[@stormcrow1112]

My 2014 just blew this same hose as we were leaving on a 1000 mile trip home. I read up on this hose and they are made cheap from Ford. I decided to go with the Sinister Diesel powder coated cold side intercooler pipe. It will last a lifetime and looks amazing.

[@RidgeLife]

Very nice!

[@garybesaw3809]

Great video! Thank you. I myself have the same issue. Wish I always found a video like this when searching a fix.

[@RidgeLife]

You're welcome!

[@randyf3577]

Your video saved me 20+ minutes on this swap out. Thank you

[@RidgeLife]

Glad it helped!

[@charlenegrady8781]

Thank you for sharing Tim. Good to see you today. We have missed you. Take care and God bless you and your family✌️🇺🇸

[@RidgeLife]

Thanks so much!

[@henryjohnson3485]

Great video! Short and to the point with not a bunch of unnecessary BS. Thank you 👍🏼

[@RidgeLife]

Glad it was helpful!

[@Papopiringa]

It should just come right out! 🤣 Excellent video, thank you so much sir! Also, the OEM part number should be HC3Z-6F073-B

[@RidgeLife]

They must have changed it. I read mine right off the part. Thx for update!

[@dcavalierproduction]

Great video thank you so much , I was a nervous wreck when I noticed it while doing an oil change.

[@RidgeLife]

My pleasure!

[@blindman9600]

Just stopped for a oil change and they showed me the crack, Engine light came on last week and was showing same bad sensor you mentioned. Headed to Ford parts dept to get the hose. Thanks for your help.

[@RidgeLife]

Glad it helped!

[@MikeHoxworth-rn1ir]

This was very helpful. Just found the same issue on my 350. Thanks,

[@RidgeLife]

Glad it helped!

[@AuntieAnn]

OH NO nothing worse than loosing boost ! 🥺😃... Great job Tim, very informative video ❤️🤗... My husband custom make those 😃

[@RidgeLife]

Haha! Cool.

[@martinvillarreal3700]

Tengo una king Ranch 2012 con el mismo problema...Excelente maestro!!, tiene mi like

[@RidgeLife]

Glad it helped!

[@TheVineyardFarmhouse]

This will be very helpful to those who have this problem.

[@RidgeLife]

I hope so!

[@carolynmesser7199]

Oh my gosh I’m so glad to see you Tim miss you .

[@RidgeLife]

Thanks Carolyn!

[@EskimoPeelot]

I just did it. Thanks for the great film. From the time I walked into the garage, I assembled necessary tools, swapped out the old one with an OEM from the dealership, test ran it and checked for leaks. I closed the hood 11 minutes later. The prices have gone up, so the tube cost me 180 +tax. Dealer wanted 704. What a rip. Now I'm showing the P0402 code. Has anyone figured out the story on that yet? I checked for O-ring and I'm going to clean and swap out the old sensor.

[@RidgeLife]

Glad it helped! Not sure on that other than my issue!

[@EskimoPeelot]

I took it to the dealer. They told me it needed a software update for the sensors. They haven't seen it with this pipe replacement, but they've seen it with other stuff, where the computer gets wonky with a new sensor. Quick update and it hasn't popped up again. Dealer didn't even charge me because I bought the part from them.

[@lpmoora]

Thanks for the really detailed video! I just did mine today and she is humming along great again! Only problem is I tried so hard using the wire cutter just like you did and the clip broke. Do you have any recommendations on how to make it look original again? The little pin that goes into the clip obviously is broken

[@RidgeLife]

Hmm a bit of medium loctite may work. Thx!

[@lpmoora]

@@RidgeLife Thanks for the response! Do you think Loctite would make it too hard to remove when the house inevitably cracks again?

[@8978Marty]

Thanks for the Video, I'm waiting for the engine to cool down to do my hose

[@RidgeLife]

Good luck!

[@8978Marty]

@@RidgeLife thanks to your video it was fast and easy. 10 minutes

[@RidgeLife]

Great!

[@paulhoneyman6923]

great job brother. I hope the family is doing well and you've enjoyed your time off. Stay safe

[@RidgeLife]

Thanks Paul!

[@nellmarie98]

Great easy to follow how to, Tim.

[@RidgeLife]

Thanks!

[@arnoldbailey1270]

Thanks Tim ,yup I have a long crack in my hose , now to see how much they soak me here in 🇨🇦 . Cheers !

[@RidgeLife]

Replace it yourself. It’s so easy!

[@carolynmesser7199]

Praying for your whole family Go RidgeLife

[@RidgeLife]

Thanks!

[@lindapetersen1800]

Was so glad to see you again !!! Been a little to much with all that has been going on in this WORLD of ours!!! Sick and tired of watching food making things haha I feel like I am gaining weight from the food on youtube haha !!! Watch a lot of other channels but it isn't like your channel that comes across with bits and pieces of things like bunnies barn chickens log cabin ((( am going to re watch Moma's cabin video again !!!))) So you are missed Big time Tim !!!

[@RidgeLife]

Awe! Thanks so much.

[@lindapetersen1800]

@@RidgeLife Love My Cupboards in that kitchen!!! God Blessings to all there on the RIDGE !!! Linda P.

[@CastleHives]

Amazing how they make parts anymore. Hope all is well, vacation looked awesome.

[@RidgeLife]

Exactly!

[@hagermotors]

Awesome video! Thanks for posting!

[@RidgeLife]

Glad you enjoyed it!

[@jeanielipskey1272]

Good to see ;ya TIm, Hope all is well with your family!

[@RidgeLife]

Thanks Jeanie.

[@solardiyhobbyandrevies8118]

Great info and step by step Tim

[@RidgeLife]

Thanks Mark!

[@miami8089]

Quick question. If my hose doesn’t come with the o ring pre lubricant, what type of lubricant do you recommend to put on? Would any standard grease work?

[@RidgeLife]

I thinks it’s a silicone o ring lub. Check auto parts store (or just use some oil, ha!).

[@miami8089]

@@RidgeLife Thank you!

[@EddieAtLarge]

Great job on this video! Very informative and well done. Thank you.

[@RidgeLife]

Thanks!

[@NeilHobbs-z5b]

Did you have any codes trigger the check engine light after changing this hose? I changed it and the check engine light came on about 2 days later. Alerts: "Engine temp readings from 2 sensors did not agree when the vehicle was first started" "One of the engine's emission control sensors is not responding as expected"

[@RidgeLife]

Only when I put the hose on without the gasket the first time! HA! Good after that.

[@grandmacarol3073]

Good job Tim.

[@RidgeLife]

Thanks!

[@jerrypearce5920]

Thanks Tim you made that look pretty easy .👍

[@RidgeLife]

My pleasure!

[@bensuttlemyre2768]

2017 F350 93000 miles. Code P02E9 Sure enough two inch split in hose. Thanks!

[@RidgeLife]

Ouch! Good catch.

[@rodelduro6972]

Hi, the correct part number from Ford is: HC3Z-6F073-B

[@RidgeLife]

I got the number I referenced in the description directly off the part. Thx.

[@kentuckybluegrassliving7718]

Just wanted to say hey hope everything is going good !

[@RidgeLife]

Thanks! Good so far.

[@riffelsrifles2981]

I installed an aftermarket piping kit from Pusher and now my tuner shows 0 airflow and throttle, throwing DTC P00BD and occasionally P0113. Replaced MAF sensor and plug Any suggestions? Thank you.

[@RidgeLife]

Sounds like the sensor is not connected on the pipe or bad.

[@riffelsrifles2981]

Checked and checked. Tried two sensors. By chance could it be from the throttle body no longer being in place or plugged in?

[@RidgeLife]

@riffelsrifles2981 you just replaced the pipe and sensor right? You didn’t remove anything else right. If you did, and didn’t install a replacement, yes. There is your problem. Sorry. Hard to TS in text.

[@willisdockery3972]

Enjoyed 😆 hope all is well 🙏

[@RidgeLife]

Thank you.

[@maryranch5329]

Great job Tim...well explained 👍

[@RidgeLife]

Thanks Mary.

[@HomesteadingNorthernMichigan]

Nothing like a 90mph test drive

[@RidgeLife]

Haha!

[@HomesteadingNorthernMichigan]

Great video brother

[@RidgeLife]

Thanks Jason!

[@thunder32g45]

Already replaced it. It did have cuts in it.Check engine light came back on and it is throwing the same code P00BD. Check engine light went away for a day, then came back on again. Hose looks good and has no cuts. Trying to see what might cause code to come back.

[@RidgeLife]

Well my new hose came without an o ring and had to steal it off old one!!

[@thunder32g45]

I’ll look into that. Thanks

[@tjhomestead5420]

Sure do miss seeing you Tim

[@RidgeLife]

Awe thx!

[@brandonups1950]

I replaced mine and now it’s showing P0402. I’ve seen where a lot of people are getting that code after replacing with OEM. One guy said he put old sensor back in new hose and that fixed his. I wonder if computer needs a rd flash with new sensor? I cleared codes with my code reader and even tried unhooking negative cables but code keeps coming back.

[@RidgeLife]

Make sure new hose had an o-ring! Not sure other than that. Sorry.

[@brandonups1950]

Yes sir. It had new o ring and greased. Thank you.

[@RidgeLife]

Hmm sorry. Good luck.

[@idonaprophet2612]

Did you figure it out? I'm having the same issues as you.

[@1bmt1974]

@@idonaprophet2612 same issue too what did you do to solve this ?

[@mattjamesburner]

Will this cause a reduction in power?

[@RidgeLife]

Yes it will!

[@ryanjohnson282]

Mine just did this today, went into lower power mode taking my 5th wheel down the highway, opened the hood to see a 4-5 inch slit in my hose, currently on the side of the highway wondering if when I replace the hose and sensor does tha lower power mode go away when all things get the proofed pressure to it?

[@collinhoward9177]

If I have a P0101 would this fix the issue as well?

[@RidgeLife]

It’s possible but if you don’t see a crack it may just be a dirty MAF.

[@markmallory185]

next is your upper radiator hose ... also when you change your fuel filters how much fuel comes out when drain the valve under the truck?

[@RidgeLife]

It runs for a good bit. I’d say over a quart for sure.

[@markmallory185]

@@RidgeLife I don't get it ... i get close to 4 gallons

[@jmt0890]

@@markmallory185crack open the filter a bit. It’s siphoning from the tank

[@outdoorstudios2022]

Thanks for the video!!!

[@RidgeLife]

My pleasure!

[@seoulnieves3241]

Thanks it was easy

[@RidgeLife]

Good deal!

[@HOODS]

Great video

[@RidgeLife]

Thanks David

[@sidelake5]

⁠That’s definitely going to be the problem. I cdidn’t realize there was a gasket on either end.

[@RidgeLife]

It got me for a sec!

[@CUONGLE-td7tk]

Thank you for the help

[@RidgeLife]

My pleasure!

[@bbop3125]

2019 with 90k miles. Mine just split. Also, noticed the clamp on the top had actually slid. Crazy that ford wouldn’t have fixed this from the factory. Also had the fuel filter under the hood spring a pinhole leak. Ford needs to do better

[@RidgeLife]

@@bbop3125 oh wow!

[@CmonHomesteading]

Gitter done

[@RidgeLife]

You know it!

[@jessereyes104]

❤ than you 😊

[@RidgeLife]

Thanks!

[@tammielieurance6204]

WOW Thank you

[@RidgeLife]

My pleasure!

[@dewpointloyd]

2019 with 50k, same thing.

[@RidgeLife]

Good Luck!

[@FVSleepRobber]

2017- 50k just found the leak yesterday

[@RidgeLife]

Good luck!

[@BurgerTx]

Christian Brothers offered $600 to replace this. I will not be giving them anymore business. I bought the hose for $93.

[@RidgeLife]

Crazy huh?

[@lordtechsan]

I broke the little yellow connector. Now what?

[@RidgeLife]

Ouch! Not sure how much that will cost.

[@lordtechsan]

Does it do anything other than hold the wires together on the quick connector hose? Could I not just tape it down?

[@lordtechsan]

It’s that little yellow piece that you used the wire strippers to pry off.

[@RidgeLife]

@@lordtechsan not sure you can buy just hat price. May have to call ford and ask.

[@lordtechsan]

I’ve watched several videos of people replaces these hoses with after market hoses/pipes and none of them use that little yellow connector on the new one. Just that temp plug in piece. It seems like it’s just something additional to secure the temp plug in.

[@patricktracy6472]

No mention of clearing the codes.

[@RidgeLife]

You can pull battery leads or wait for several start cycles and it should clear on it's own.

[@billdwyer7897]

My 2016 hose failed with 96k miles on it in 2024 , original hose and owner , I replaced it with factory hose , $300. for the parts . 🤦🏻‍♂️next time will do Aluminum

[@RidgeLife]

I should have also. Last forever. Factory will just do it again.

[@billdwyer7897]

@@RidgeLife Yup , just went and got it to save time , need My boost back 😂,, Will order ahead of time when ready 😎👍

[@JesusMartinez-tp5vf]

H and S is better

[@RidgeLife]

Nice!

[@WestTennessee]

Good job Tim.

[@RidgeLife]

Thanks!