How to Replace Door Lock Actuator 2002-2006 Honda CRV

Рет қаралды 49,394

TRQ

Күн бұрын

Пікірлер: 34

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@cadams5613 2 жыл бұрын

Thank you for this well made video. But a heads up for other CR-V owners, this video is for the made in Japan CR-V. If your VIN starts with SHS your CR-V was made in Great Britain and the lock, actuator, and plastic inner lock rod guide is different.

@billbarker2078 2 жыл бұрын

Any tips on what the differences are? Thx!

@stoneyvill 2 жыл бұрын

This is so true because I have the Japanese spec in Jamaica and I bought the actuator from the UK not knowing there's a big difference between the two, so people please check before you buy.

@joshperez525 Жыл бұрын

Wow this looks like it will be extremely annoying. Might just pay someone to do mine.

@benjam7n128 Ай бұрын

Love this video! However I have a question… if you were to snap off a plastic clip on the door panel what should you do?

@xomuse3911 3 ай бұрын

THANK YOU!! You're the only video on youtube that shows in detail on how to reinstall the door panel. I had a hell of a time trying to fit it back on over the lock tab and lip but after watching this and following your advice I was able to reinstall it in 30 seconds :)

@kellyandgeorgia1 2 ай бұрын

Superb how to video! Exactly what I needed. I had to watch and rewatch each segment during the removal and installation, but this video guided me through it perfectly. Some how to videos have in them they just leave you hanging on the next step, but yours was extremely clear and helpful! Thank you for making this video!

@toddjacobs8408 10 ай бұрын

How do I know if I have the black actuator or the white actuator, they are different parts.

@charvakkarpe Жыл бұрын

1:45 he broke the tab by jabbing it with a screwdriver. You should use your fingers to gently twist it off the bar instead.

@Matt-rq6wz 2 жыл бұрын

Thank you! This really helped me complete the job. You made the door handle rod removal look deceptively easy. At least on mine, it nearly took breaking the handle assembly to remove it. I added a little lubricant and it finally came out 225k miles on the original. The only residual issue is it’s a bit more firm to unlock with the key manually. It’s worth checking that things are functioning as they should before putting the whole door panel back on. Took me about two hours. I think it could easily be done in an hour or less if everything goes smoothly.

@Matt-rq6wz 2 жыл бұрын

Also, by far the best video available on the job.

@danieljohnson2551 Жыл бұрын

Very nicely done. My 2004 door looks a bit different, but it's all more or less the same thing. Thanks much!

@patpan77 Жыл бұрын

Great video! The door handle rod got me stuck for a few hours and the position in the assembly @9:27 had me!

@iosifmd 5 ай бұрын

@Anne_NC 2 ай бұрын

Thank you so much for this video. It saved me so much money! Excellent detailed instructions.

@Finnwolf88 5 ай бұрын

Thank you for this video. About to start the work on three doors (both rear and front right). Would be 600€+ in a repair shop. Actuators cost 39€ for a set of four

@MrVulcan1963 Жыл бұрын

Love the detail in this video, very well done. I have to replace the actuator in the front/right door. This video will be a great help.

@James-kv5fs 7 ай бұрын

At 5:29 you remove a white plastic part. What it is that? I broke mine and need to get a replacement. Thanks.

@Seidowas 7 ай бұрын

Hello i have one door still doing a clic sound but doesnt open And one who doesnt clic AT all What do i need ton change

@jandreshernandez1657 Жыл бұрын

I did all my best, I replaced the actuator even the cabling, and I checked, the fuses too, I don’t know what is my problem!

@rhertz9829 4 ай бұрын

Excellent, EXCELLENT vid. THANKS!

@jameslund221 8 ай бұрын

Is this the same video I started watching before I fell asleep, it’s not that it’s not informative it’s just I have no idea what is going on. lol 😂

@billybobjones4317 5 ай бұрын

Thank you, made this job a lot easier, quicker and saved me $258 :)

@trifectamedia Жыл бұрын

Great video. I tried other videos before finding this one, which is much better. Thank you, especially for the section at 9:16. I had reconnected the rod improperly the first time and this showed me the correct way!