How To Replace Drive Belt Component Kit 2005-10 Volkswagen Jetta

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/178/X...
This drive belt component kit includes a new serpentine belt, and a belt tensioner, for when your belt has worn out, and the tensioner is loose, or seized up. This video shows you how to install a new serpentine belt tensioner and serpentine belt on your 2005-10 Volkswagen Jetta.
• Check here for more videos on the 2006-2010 Volkswagen Jetta: • Volkswagen Jetta 2006-...
This process should be similar on the following vehicles:
2005 Volkswagen Jetta
2006 Volkswagen Jetta
2007 Volkswagen Jetta
2008 Volkswagen Jetta
2009 Volkswagen Jetta
2010 Volkswagen Jetta
Tools you will need:
• 15mm Wrench 1aau.to/opQ/1AX...
• 10mm Socket 1aau.to/oP7/1AX...
• 15mm Socket 1aau.to/oWP/1AX...
• 17mm Socket 1aau.to/oWP/1AX...
• M9 Triple Square Bit
• T25 Socket 1aau.to/okX/1AX...
• T30 Socket
• Ratchet 1aau.to/o3Q/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oWP/1AX...
• Torque Wrench 1aau.to/oEk/1AX...
Subscribe: / @trq
Check out our playlist:
Volkswagen Jetta 2006-2010 5th Generation: • Volkswagen Jetta 2006-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@ethanwhittet7570]

Fantastic video. Just completed the repair. Thank you!

[@jonnyz5772]

well done. appreciate time and effort to explain process - do you have the torque spec for the tensioner bolts ?

[@russellwilson530]

the triple square on my 2008 Jetta takes a 10m size vs the 9m size you are using. Is that common to have different sizes for these years.

[@808autobody7]

I think he made a mistake. They're all M10's brother.👌✌️🤙

[@bobe2933]

Do you need new bolts/screws? In the video, you are reusing them, so I'm assuming that for this application, you don't need new ones?

[@JulioCesar-uc7rb]

Hello! I have a doubt, please. how many miles/km i should need replace them in avarage? Is it necessary replace the bearing of another acessories like altenator, pump water...? Tks!

[@Alex-cq2mc]

No torque specs for the tensioners and idler pulleys??

[@Gawd_daddy]

Do you guys have a video showing how to get the alternator out if the head of the bolt broken off?

[@TRQ]

+Samurai Living We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@haugwoods]

3 13mm Bolts to remove and drop the AC Compressor and its WAYYYYY easier and you can actually see what you're doing - 10mm triple square for my 2009 Jetta as well

[@renaldofruean2474]

Would that be the cause of a cooling system to leak ? 2:09

[@arturohernandez376]

Annoyed that no one sells a 9m triple squared socket… online guess ama have to wait even more 👍

[@Pawan789456]

How much would this cost to replace?

[@bigpossum5482]

Thank GOD I read the comments. But I'm still confused on the triplesquare size for removing the lower pulley. If you freeze frame @ 4:46 it clearly shows a 9m . The comments say 10m. I guess I'm buying both.

[@TRQ]

+@bigpossum5482 We suggest using the 9mm.

[@VinodKumar-jt3og]

Nice 👍 good job halpfull video I am your videos very Halp full I am car 🚗 makenk now job Oman my dreem Canada job your workshop witch country

[@merrickb]

Great video, ingormative and professional. Please Lower the volume when using power tools! Or skip through it!! My ears hurt