HOW TO replace Drive shaft and Stub shaft VW Transporter

Tutorial HOW TO remove and replace VW Transporter T5.1 drive shaft and stub shaft.
❗CV Joint was making clicking noise
❗Outer CV boot split
❗Hole in Inner CV boot
❗Play in drive shaft
DIY Guide how to do it easy and quick with no special tools on your driveway.
🔗Stub shaft ➡ www.auto-doc.i...
🔗Drive shaft ➡ www.auto-doc.i...
🔗EP2 Grease ➡ www.auto-doc.i...
======================================
If you found this video helpful! Please give us a thumb up 👍 leave your comment below ⬇ 💭
☕Buy a coffee ➡ ko-fi.com/jers...
🔔 SUBSCRIBE ON KZbin
/ @jersovauto
Thanks for watching! 🙌
======================================
⚠️Disclaimer: This video is made for entertainment purposes only. You should always seek a professional advice.
#jersovauto #transporter #driveshaft #vwt5

[@jersovauto]

HOW TO change Transmission Fluid /Gearbox oil 👉kzbin.info/www/bejne/a3qti2qIpp50m9Usi=zY4JUTCuagONeSco

[@johnclaut]

good tutorial ,I have the T5,and the torque settings are tighten to 200,then slack off 180 degrees, then torque back up to 200,mine is the 2.5 tdi

[@grahamhayden8654]

Great video my friend , very well explained

[@stevebloor2617]

Great Video!...a big thanks for your channel.

[@Olleh987]

really helpful video, thanks mate

[@jersovauto]

@@Olleh987 Your views and comments are my greatest motivation!!! 👍 🤜

[@joeblackman100]

Really helpful, thanks for posting, btw do you need to drain the gearbox oil for this job?

[@jersovauto]

@@joeblackman100 hi, no you don’t have to !!!

[@williamsjostrom9444]

Perfect timing, I will get the parts tomorrow :) Good except for the torquing. Seems it was above 200Nm already and never "jerk" the torque-wrench.

[@jersovauto]

I should probably invest into better torque wrench! Plus I would be paranoid nut 🔩 can come off since in has no split pin on shaft… just a nylon lock..Thanks for watching and commenting 👍 🤜

[@DanVilis]

you just on time mate. cheers👌

[@scottkelly-e5x]

Great video I feel I can do mine now but need to ask is the seal part a part of the stub or a completely different part as I have leakage too. Or would leak be because the stub is knackered which it is ta

[@jersovauto]

@@scottkelly-e5x New stub comes with new seals and bolt…since my seal inside gearbox which surrounds ur stub was fine I didn’t bother changing it.. perhaps when I will be changing stub next time I’m gonna have to do it. It’s really not that difficult to do.. u just need to pry an old one and then carefully place new one with light tap of rubber mallet. Good luck with yours! And thanks for watching!!! 👍 🤜

[@scottkelly-e5x]

@@jersovauto thank u sir

[@Zenzenster]

Good video, what engine is yours and am I right that the stub axel shaft is only on the offside

[@jersovauto]

It’s 2.0 tdi CAAB 75kw , you r right stub is only on offside. Thank you for watching 👍 🤜