Рет қаралды 295
Buy Now!
New Engine Knock Sensor from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new knock sensor in your 2010-2013 Kia Soul 2.0L L4. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.
Estimated installation time for a professional technician is approximately: 2 hours 6 minutes
This repair was done on a 2013 Kia Soul + 2.0L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Soul
2011 Kia Soul
2012 Kia Soul
2013 Kia Soul
Tools you will need:
• Phillips Head Screwdriver trq.video/ob3z...
• Pocket Screwdriver
• 10mm Socket trq.video/ocbD...
• 12mm Socket trq.video/ocGz...
• 8mm Socket trq.video/ocbD...
• Trim Tool Set trq.video/oaQY...
• Needle nose pliers
• Needle nose pliers trq.video/oNd-...
• Pliers
• Ratchet trq.video/ocHs...
• Socket Driver
• Socket Extensions trq.video/ocGz...
• Torque Wrench trq.video/obHP...
• Brake Parts Cleaner
• Cloth Rags trq.video/o5x-...
• Gloves trq.video/ob2D...
• Safety Glasses
• Magnet - Extendable
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.