How to Replace Engine Water Pump 2003-2011 Mercury Grand Marquis

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00024
This video shows you how to install an engine water pump on your 2003-2011 Mercury Grand Marquis. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• Pry Bar 1aau.to/oJR/1AXAA00020
• 19mm Wrench 1aau.to/oMA/1AXAA00010
• 10mm Socket 1aau.to/oaPT/1AXAA00017
• 13mm Socket 1aau.to/oa7g/1AXAA00015
• 3/8 Inch Drive Ratchet 1aau.to/oa7g/1AXAA00015
• Ratchet 1aau.to/obii/1AXAA00016
• Socket Extensions 1aau.to/oa7g/1AXAA00015
• Torque Wrench 1aau.to/oaow/1AXAA00044
• Gloves 1aau.to/oCK/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/owu/1AXAA00343
• Sandpaper
• Drain Pan 1aau.to/otQ/1AXAA00320
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@6235dude]

I knew this was gonna be no big whoop, but "view before you do". Thanks for posting the quality tutorial, and may I say the entire procedure displayed professional workmanship.

[@georgeblair7129]

Sure looks like those 4.6L engines in those cars are just easy to work on.

[@anthonyanderson1420]

Y'all make it look so easy. Great Video!

[@ConleyProduction]

Hey if you guys ever read my post i want to stop and say thank you so much. I really learned alot from you guys!

[@abialo2010]

how many times did you hit it. should have shown it not edited. i have a stuck one i cant get out to save my life!

[@Alfonsotocoloco]

Amazing.

[@kennethfisher1564]

Well done.

[@ronhood7773]

Always mention that the weep hole faces down. It helps orientation

[@jamesfarley337]

Thanks a lot the Ford dealer wanted $150 an hour labor times 2 Plus the water pump price and a new serpentine belt

[@thaboyd]

I broke my drain plug in the process

[@cavanparsons4593]

Alternator is only a couple bolts and it makes it much easier to hit it with a hammer

[@MrWontstopthefunk]

I did a pressure test and found leaking at the water pump, never seen a leak here or puddle under the car. Only obvious on pressure test. Does it need to be replaced?

[@stickshiftdriver1832]

So it’s ok to leave the cap off after you add coolant to make sure there’s enough in the reservoir

[@snfu6574]

What size tourqe wrench do I buy, 3/8 ?