How To Replace Ford Superduty Ball Joints 1998-2004 Excursion F250 F350 F450 F550 Dana 50 Or Dana 60

Get Dana Spicer OEM Ball joints here
venturestruckparts.com/produc...
How to remove steering knuckle, press out old ball joints, press in new Dana Spicer ball joints, and reinstall rebuilt knuckle with torque specs.
Ford Dana 60 or Dana 50 Front Axle
Process shown is also the same for Ford F250 F350 2005-2024
www.venturestruckparts.com
801-621-0091

[@livindalife5356]

Your attention to detail was fantastic. Thank you for such a great video.

[@ammonjohnson9531]

You are most welcome! Thank you for the kind words!

[@randycordes464]

You done a excellent explanation on putting in ball joints thanks

[@DarrenDarren-bs2gh]

Thanks for the great video and for giving the socket size that are needed to remove the ball joint nuts!

[@mikereed8832]

Well done… excellent video.

[@markgoldstein3933]

excellent job clean work nice to see some people still care

[@ammonjohnson9531]

Thank you for the kind words!

[@rbuffaloe]

You guys make great informative videos, thank you.

[@ammonjohnson9531]

You are most welcome! Thank you for the kind words!

[@P.B.Theriver]

Excellent detail in your videos.

[@herewegofans]

Amazing video. Thank you for the tips as well.

[@ammonjohnson9531]

You are most welcome! Thank you for the kind words!

[@jamesrichardson63]

Just to let the ones that are not familiar with the Ford vacuum assisted locking hubs know what the vacuum is for, its the vacuum that actuates the locking hub from a switch inside the cab.

[@darrylm3627]

Good Stuff, Great Tips👍🏿😀 2016 F250 XLT 6.2L Gas Flex Fuel 4W 4D (Stock)

[@dirtydan4969]

Great video my guy

[@ammonjohnson9531]

Thank you for the kind words!

[@jasonfields3501]

It would be great if you put the pipe dimensions and tool recommendations in the video description for easy reference. Please do if you can

[@imaslowlerner]

Excellent job.

[@ammonjohnson9531]

Thank you for the kind words!

[@moldcos21]

Nicely done ✔

[@ammonjohnson9531]

Thank you for the kind words!

[@TheThirstycoyote]

Great vid

[@ammonjohnson9531]

Thank you for the kind words!

[@biff1tannen]

Warning: Great video, but dont start on this job, if you not have the special tool to install the axel seal, to the knuckle again. Happens to me 2 years ago. I was stuck for many days. Look the other videos they have, for axle seal replacement. Then you understand. 😊

[@tyeschreyer394]

no l llp

[@jeongraekim5254]

good !!!

[@ammonjohnson9531]

Thank you for the kind words!

[@dylanturley7291]

My upper came with a snap ring, but the one I replaced didn’t have one, do I need to use it?

[@bajamedic]

Absolutely

[@stephenstewart2974]

So no grease when pressing in, everything is dry?

[@ammonjohnson9531]

No grease.

[@trappistachel]

What did you use to paint the knuckle with? Krylon?

[@56kwith200ping]

I'd use POR-15.

[@tomwoods1373]

How much resistance turning the knuckle by hand after installing the new ball joints? I installed moog on mine and now my truck drives like crap. And is very dangerous to drive. I removed the knuckle on the left and right side and went through the torque process all over again and it still is dangerous to drive.

[@VenturesTruckParts]

We would recommend always using OEM Spicer Parts

[@tomwoods1373]

@@VenturesTruckParts thank you. I'm just not a fan of no grease fittings. But the ones that came in it didn't have any and they were in there for 300 thousand miles. Lol

[@nicholasparrish5524]

Wtf I just broke 2 breaker bars trying to get the top nut off 😆

[@jorgefonseca9225]

Great vedeo and great explanation 👍 nice work 👏👌this fella is a really fucking good mechanic 👏👏👌 and of course you have a exactly tools for everything 👏😀 I need replaced a all 4ball joints on my excursión but I don't have a specific tool for removing a ball joints 🤔 anyone recommend the type of the tools? I can buying on eBay 👌 cheers from Norway 👍

[@mondavou9408]

This guy's company will sell you the whole knuckle (including the ball joints pre-pressed in). Shipping to Norway will probably be cost prohibitive though. 🙂

[@robertjohnsonmetals3727]

The 2019 not any different

[@ericblaine2791]

Good video but that’s a brand new knuckle

[@ammonjohnson9531]

It is a remanufactured knuckle. We do take pride in our work and make them look as good as new.

[@pedropedro738]

To much talking man

[@ammonjohnson9531]

Trying to appeal to all skill levels. I appreciate your feed back and will take it into consideration for other videos.