How to Replace Front Brakes 2004-08 Nissan Maxima

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS00049
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2004-2008 Nissan Maxima.
• Check here for more videos on the 2004-08 Nissan Maxima: • Nissan Maxima 6th Gene...
This process should be similar on the following vehicles:
2004 Nissan Maxima
2005 Nissan Maxima
2006 Nissan Maxima
2007 Nissan Maxima
2008 Nissan Maxima
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 17mm Wrench 1aau.to/oa/1AXAA00010
• 14mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXSS00035
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Nissan Maxima 6th Generation 2004-2008: • Nissan Maxima 6th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@markstewart1045]

Finally a video with torque specs! Thank you!!!

[@tomcruz6196]

What impact wrench are you using ?

[@tonycervantes4816]

I have a cuestión sir. Need to pump of brake pedal every time you change the passenger side and do the same on the driver's side. Or just once, finishing the two opposite sides???

[@holdenweisbecker199]

Just do it at the end after you’ve replaced both. No need to do it twice

[@jvnbrk]

To each their own, but you don't have to take the caliper apart like that. The pins never have to be pulled, just use the 19mm and take the whole thing off then compress with c clamp. Put your pads inside then put the whole brake back on. Alot quicker, and Rotors is a very once in a while thing. The way its done here is basically just to clean it up good while taken apart, but a basic pad change don't require all those steps

[@mistacdawg6882]

Yup, but the video still serves its purpose. Now they know how to change the rotors and clean the wheel hub.

[@tonycervantes4816]

Yeah Jevon but he show how to remplace a rotors and brake pads. And how to clean it .. so for me is a.good VIDEO . AND I CAN DO IT BY MYSELF NOW. THANKS TO THIS VIDEO.

[@tonycervantes4816]

@@mistacdawg6882 yes you right 👍 . Is a good video.. and I want to see more videos like this.